RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: punkdSICO on December 14, 2011, 04:40 PM
-
Hi all
I have read up on the Oven Pride method of stripping paint, and I now have some, ready to go!! Initially, I plan on stripping the below headset but my question is: will Oven Pride damage chrome? Obviously, the headset has a chrome tube so do I need to somehow protect this? If so, how do you protect it??
(http://farm8.staticflickr.com/7147/6453568421_0319fe5d80_b.jpg)
Thanks for any replies..
Ta,
Paul
-
No ... the shelves in an oven are chrome
-
oven pride will shift certain types of annodising but will not strip paint paul
it wont shift hard anno either
-
oven pride will shift certain types of annodising but will not strip paint paul
it wont shift hard anno either
Ah - okay.. I will still give it a go with the above but, the other thing I was going to try are some pedals that have about 1mm of fresh powder coat on them!! Any thoughts on how I might shift powder coated paint?
Ta,
Paul
-
Powder coat - paint stripper. Slap it on, leave it for a while, slap a bit more on and leave again. Then remove :)
-
nitromors paint stripper
-
the dance of the DEVIL >:D just one spot can make you feel like you just touched hell ;D
kids and pets out the way
gloves and a bucket of water and soap
good luck :shocked: ;D
-
Paul, knock the headset out first mate so you get all the paint off. Then go get it blasted off instead and do the job properly!
Gloves with both nitromors (for paint) or oven pride (for annodising) though as you think that Insanity chilly sauce shit burns? Just get a bit of either of those bad boys under your finger-nail for a new definition of pain!
-
Paul, knock the headset out first mate so you get all the paint off. Then go get it blasted off instead and do the job properly!
Gloves with both nitromors (for paint) or oven pride (for annodising) though as you think that Insanity chilly sauce shit burns? Just get a bit of either of those bad boys under your finger-nail for a new definition of pain!
or use caustic soda on the anno :daumenhoch:
oh and that hurts on the skin worse than oven pride :LolLolLolLol:
-
and don't do any of them naked ??? ;D
-
gasket remover from a motor factors to remove powder :daumenhoch:
-
Paul, knock the headset out first mate
Oh, so I couldn't see the pics earlier but clearly Paul said headset when he meant stem :yahoo_silent:
-
local cheap shit store do graffiti remover for about £1.50p a spray can...works the nuts on powder and paint :daumenhoch:
-
local cheap shit store do graffiti remover for about £1.50p a spray can...works the nuts on powder and paint :daumenhoch:
great tip
would have never thought to use that
-
Update 1: I tried Oven pride on the above stem; left it soaking for 24 hours and did pretty much bugger all.
Next I will try some of the above (eg graffiti remover).
ta,
Paul
-
looks like that could be hard anno paul
a bugger to get off mate
sorry
-
just use some fine wet n dry :daumenhoch: