RADBMX.CO.UK

Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: nosepickben on February 05, 2012, 04:30 PM

Title: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: nosepickben on February 05, 2012, 04:30 PM: 2 weeks ago, I sent this lot off to you know who for the treatment...

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/032.jpg)

It came back a few days back, now she looks like this...

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/037.jpg)
Title: Re: Add this to the S&M pile....
Post by: nosepickben on February 05, 2012, 05:31 PM: Write-up & more pics tomorrow......
Title: Re: Add this to the S&M pile....
Post by: Betty on February 05, 2012, 06:24 PM: Nice that... :daumenhoch:

Beringer bars for a change... ;D

Are those canti mounts on the forks?
Title: Re: Add this to the S&M pile....
Post by: nosepickben on February 06, 2012, 12:33 AM: yep, the beringers. Love 'em
Title: Re: Add this to the S&M pile....
Post by: SaMAlex on February 06, 2012, 09:27 AM: Nice. You dont see many 1 1/8th Holmes (NG or normal). :daumenhoch:
Title: Re: Add this to the S&M pile....
Post by: thecaptain on February 06, 2012, 10:39 AM: had a friend who had one of the original 1 1/8" holmes, was so jealous, ha, your bike looks sweet, I wanna see a front brake!
Title: Re: Add this to the S&M pile....
Post by: brettypeeps on February 06, 2012, 10:44 AM: That is one sweet looking Holmes :smitten: :smitten:
Title: Re: Add this to the S&M pile....
Post by: kev-s on February 06, 2012, 11:03 AM: nice, i do like a red 1&18th holmes :daumenhoch:
Title: Re: Add this to the S&M pile....
Post by: nosepickben on February 06, 2012, 01:07 PM: S&M Holmes inch and an eighth HXL7593
Pitch-faux-ks
Profile GDH, whippit 39t
Challenger stem, velo orange headset, beringer bars, power paws, jive nuts
Odyssey pedals, levers, evo2 brake (chrome)
Sun big city lites, DT swiss spokes, TNT hubs
Odyssey tyres 2.2/1.9
S&M seat, redline post, GT clamp
Shimano deore cantis to be fitted, I need to grind some flats onto the fork topnut first. My cable will use a barrel adjuster dropped into the topnut's hexhole, which will mean I can't adjust the topnut once the frontbrake is cabled up, might just bed the headset in first before I start messing with it again!
Luscious paint by SuperBikeDan, glossy red with a light copper sparkle. Hope it shows up well on here. You can't see the sparkle from more than 3 metres or so away, but when you look closely it makes your eyes go funny, very 3D effect to the paint!
Stickers by Del

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/004-1.jpg)

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/003-1.jpg)(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/002-1.jpg)

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/001-1.jpg)(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/035.jpg)
(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/034.jpg)
(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/036.jpg)
Title: Re: Add this to the S&M pile....
Post by: elevensies on February 06, 2012, 05:47 PM: stunning :D

love beringer bars too, i got some on my stricker, and they feel real good....
Title: Re: Add this to the S&M pile....
Post by: superbikedan on February 06, 2012, 09:50 PM: those last pics of the build look awsome ben :daumenhoch:
Title: Re: Add this to the S&M pile....
Post by: nosepickben on February 06, 2012, 11:40 PM: thanks dan, i'm delighted with your paintwork, the pictures here don't show the true effect unfortunately. I managed to put it together without scratching it too!
Title: Re: Add this to the S&M pile....
Post by: rad_pitt on February 06, 2012, 11:51 PM: That's a smart Holmes, homes - great build :4_17_5:
Title: Re: Add this to the S&M pile....
Post by: nosepickben on February 12, 2012, 09:51 PM: Quote from: thecaptain on February 06, 2012, 10:39 AM
had a friend who had one of the original 1 1/8" holmes, was so jealous, ha, your bike looks sweet, I wanna see a front brake!

Here it is with front brake up and running...

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/001-2.jpg)

(http://www.radbmx.co.uk/archive/albums/mm455/nosepickben/006.jpg)
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: mamadirt on February 13, 2012, 01:19 PM: Neat! :daumenhoch:

Torque those hanger grub screws nice and tight though or it's endo city ;) (I was always paranoid running a front canti set up).
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: nosepickben on February 13, 2012, 04:48 PM: yep, they are allen key bendingly tight. I've run cantis for years, never had a problem yet. Its straightforward doing the lugs but drilling the forks can be a pain, the steel is so hard it eats drillbits. I like it because it looks neat, keeps friction to a minimum and stops so well with any old blocks. Very easy to set up and maintain.
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: Gary72 on February 14, 2012, 07:17 PM: Looks very nice.
Will the front cable hanger not scratch the paintwork? Does the cable not wear away on the forks?
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: nosepickben on February 14, 2012, 08:28 PM: No, and No. Cable hole is angled for smooth enrty and exit (fnarr fnarr) There's bugger-all force between cable hanger and forks. I've run this system since 1996, never had a cable failure, it took several years of regular use to wear any paint away.. :)
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: Gary72 on February 14, 2012, 08:52 PM: Thanks, Just from the front it looks like the hanger is sitting on the forks.
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: Betty on February 14, 2012, 09:14 PM: What's the difference running a canti brake over the usual 990?

Just wondering, i've got some 990 forks with a fly brake and it works really well, like hitting a wall!

Some outdoor pics on a nice day wouldn't go amiss... ;)
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: nosepickben on February 14, 2012, 09:25 PM: Oh yeah, it touches a little when brake is pulled but it's such light pressure that you can't tell. My old GSport fork crown was made of such hard stuff that it eventually wore a concave shape into the bolthead of a diacompe hanger! Took abaout 4 years though, when I was riding a lot more. This hanger is soft ally, softer than the paint!

Betty, I've just stuck to the "if it ain't broke..." rule here, I ditched my nippon, must've been 1995, and run this system ever since. Only had 2 pairs of forks for the next 10 years so I never needed/wanted 990's. The cable loop is soooooo 80's dear!!!
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: Badbaldie on February 14, 2012, 09:34 PM: very nice :daumenhoch:
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: oldtired on February 14, 2012, 10:12 PM: :4_17_5: looks real nice, loving the color , quality, :daumenhoch: never seen that brake set up before , saw the before shots and thought you were going to run a V brake didn't realise it was canti, very clever :coolsmiley:
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: nosepickben on February 14, 2012, 10:21 PM: Thanks, I can't take the credit for the idea, it was that wotsisface french. :Great_Britain:
Title: Re: Add this to the S&M pile.... Oversize Holmes with front cantis.
Post by: oldtired on February 14, 2012, 11:04 PM: all becomes clear now :daumenhoch: