RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: nosepickben on February 14, 2012, 10:00 AM
-
Has anyone found anything that will do the trick? I have some 1/2" dx's, i know the 9/16 axles from shimano sx's are the same, but what about victor dx's, wellgo dx's, S&M dx's? Are any of these the same axle? Advice needed please... Whats your experience?
-
Some one did find a straight swap i think - jaymz or discostu was it ??? ?
-
I've just changed the axles on a set of Shimano SX's to 9/16 and used KKT AMX pedals which are a straight swap.
If SX's fit in DX's then these will work perfectly. :daumenhoch:
I also have a pair of Victor DX's (1/2") and they seem the same size too but I haven't had them apart so don't quote me on that. Also, they're a lot harder to find in 9/16" than the KKT's.
Giles ;D
-
it was me bendy :knuppel2: :knuppel2: :knuppel2: :LolLolLolLol: :LolLolLolLol:
get yourself to halfords and buy a set of alloy halfords fpd platform pedals
the axles, bearings, bearing cups, cones & cone lock nut all fit into the dx body, ive restored 2 pairs of dx's this way :daumenhoch:
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_566789_langId_-1_categoryId_165566
-
it was me bendy :knuppel2: :knuppel2: :knuppel2: :LolLolLolLol: :LolLolLolLol:
get yourself to halfords and buy a set of alloy halfords fpd platform pedals
the axles, bearings, bearing cups, cones & cone lock nut all fit into the dx body, ive restored 2 pairs of dx's this way :daumenhoch:
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_566789_langId_-1_categoryId_165566
They also work for SX's as on your advice i did my SX's to 9/16, hence why i have a set of shimano spindles for sale!!!!
-
cool, i think there's gonna be a surplus of 1/2in shimano axles soon :LolLolLolLol:
-
Here's another - if you trim off the last three threads from the ends of those axles (pop a nut on threaded down to the bottom, dremel off and unthread) they'll even fit Peregrine pedals n'all :)
-
Victor dx axles are a straight swap n all, i've done it... :daumenhoch:
-
Thankyou gentlemen. I'm sure I have some odd victor dx's. Hopefully one of each side....... :)
-
Haro DX's work as well :daumenhoch:
-
anyone tried Wellgo DXs?
-
Pretty sure they fit Ed. I've seen that elsewhere.
I've just swapped some Shimano SX spindles, and they work perfectly in DX :daumenhoch:
-
Pretty sure they fit Ed. I've seen that elsewhere.
I've just swapped some Shimano SX spindles, and they work perfectly in DX :daumenhoch:
coolio ... cheers :angel:
-
All this pedal swapping, Anyone have some nice SX bodies going spare, Either Victor or Shimano?
I've got some 1/2 SX here that are rough and could do with some cheap tidy bodies :daumenhoch: