RADBMX.CO.UK
BMX General => BMX Chat => Topic started by: glenboy on May 23, 2012, 10:41 PM
-
the old threads gone :( but look at em now bet robbie 2 shoes is rubbing his hands together
http://www.ebay.co.uk/itm/170844706394'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
-
he'll not be trusted on here now , all for what a set of copy bars
-
What have I missed?
Tell me, now!
-
they aint fake
bob made them in taiwan i heard
-
As the vulture in Jungle Book says "Hey, now don't start that again" :LolLolLolLol:
Where did the other thread go?? I was enjoying that :daumenhoch:
-
give me a minute i'm just gonna get me crisps :D anyone want some :daumenhoch:
-
Get some pop too.
Can someone bring me up to speed please?
-
i put on that these looked like mine which are copies which have the more sweep back and are narrow , anyway the owner of the bars came on saying that bob haro had these specially made in taiwan nowt to do with vector then jay and si off here told em they were copies and he told em to get back to school etc it was a good thread
-
Booooooooooooooooooo.
-
It was a fun thread indeed ;D
I was sharing thread popcorn watching the carnage.
-
he'll not be trusted on here now , all for what a set of copy bars
Kappy u sold me 2 sets of Haro bars 1 for 120 and had scrapings 2 white Haro bars that had been cut down,,,,wen I said about it on phone to you u tried selling me more shit!!!!!!
-
the old threads gone :( but look at em now bet robbie 2 shoes is rubbing his hands together
http://www.ebay.co.uk/itm/170844706394'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
these bars weigh 2lb 8oz measure 28in in width and have a 8in rise,,,,,,,,,,you lot know nothing about these bars and what's real n what's not get a life!!!!!!!!
-
he'll not be trusted on here now , all for what a set of copy bars
Kappy u sold me 2 sets of Haro bars 1 for 120 and had scrapings 2 white Haro bars that had been cut down,,,,wen I said about it on phone to you u tried selling me more shit!!!!!!
. Kappy sold my pal a set of real dodgy wheels!!!!!! Haha. Kappys sales now on!!!!! Jog on mate
-
:LolLolLolLol: :LolLolLolLol: :LolLolLolLol: real do , another late night. :daumenhoch:
-
wonder if his mummy know's he's up this late on her computer , crisp anyone ,
-
wonder if his mummy know's he's up this late on her computer , crisp anyone ,
:LolLolLolLol: aye i will have one Daz.
-
they aint fake
bob made them in taiwan i heard
:LolLolLolLol:
you been doin your research like you were told brummie ? ! hope you hav not been chatting any wetness!!
-
wonder if his mummy know's he's up this late on her computer , crisp anyone ,
Kappy sells dodgy stuff all the time he just sold my pal a so called mint set of araya's they turn up knackerd haha
-
bob was involved in the development - arrested development ? :LolLolLolLol:
-
they aint fake
bob made them in taiwan i heard
:LolLolLolLol:
you been doin your research like you were told brummie ? ! hope you hav not been chatting any wetness!!
ere bobby ain't you the fella on the London ride that found that battle lax on the train track?????? Ain't it seen its days back then haha,,,,,,,,,,,,,,come on you all give me some facts??????.
-
Robbie with the questions you came out with when pm'ing me ,, you know fook all ,
hense the copy bars , i like your style turning the thread on me , thing is i've delt with most on here so do one
25 posts ,,,, 23 on a thread about copy sh1t on the bay
-
i've had loads of stuff off kappy and even though hes crazy all the stuff he's sold me has been good sheeet, always been happy , i'm starting to wonder whether you are already a radster and just got a new id to stir it up on here you seem to know everybody on here even though you only joined up yesterday
-
they aint fake
bob made them in taiwan i heard
:LolLolLolLol:
you been doin your research like you were told brummie ? ! hope you hav not been chatting any wetness!!
ere bobby ain't you the fella on the London ride that found that battle lax on the train track?????? Ain't it seen its days back then haha,,,,,,,,,,,,,,come on you all give me some facts??????.
twas i ! common knowledge. loads of witnesses ! :LolLolLolLol:
-
come on you all give me some facts??????.
Here are some facts...
A paper cannot be folded more than 9 times.
More calories are used when sleeping than sitting and watching tv.
The Wright Brothers’ first flying journey is shorter than a Boeing 747 airplane’s wings.
Vector bars are fook ugly. ;) ;D
-
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1185
Was this your extensive research on the bars?
They're copies, why list em as vector bars? :idiot2:
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
-
come on you all give me some facts??????.
Here are some facts...
A paper cannot be folded more than 9 times.
More calories are used when sleeping than sitting and watching tv.
The Wright Brothers’ first flying journey is shorter than a Boeing 747 airplane’s wings.
Vector bars are fook ugly. ;) ;D
Haha that they are
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
this is my number anyone wants to phone me and prove me wrong then your more then welcome 07572 742 020
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
this is my number anyone wants to phone me and prove me wrong then your more then welcome 07572 742 020
If no one as any evidence how to prove these are fake bars then it's all wind and air haha
I'm asking for your proof?????
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
this is my number anyone wants to phone me and prove me wrong then your more then welcome 07572 742 020
If no one as any evidence how to prove these are fake bars then it's all wind and air haha
I'm asking for your proof?????
Just to close this one down before it goes on and on and on etc.
It is all well and good asking for people on here to give you proof that they are fake (and I see your point of view even if I don't agree).
BUT at no stage have you shown any proof that they are real other than saying that Haro was sponsored for 2 years only by Vector and then he made these in Taiwan.
Where is the proof of this other than your word? What research did you do and where can we find it?
-
they have something they shouldn't and miss one thing. i'm not saying because it's easily altered and you are obviously devoid of moral fiber that would prove you worthy of such valuable knowledge. but to the trained eye, it's like a shining beacon of deception clear for the knowledgeable to see. better you don't know, otherwise somebody will be deceived. :yahoo_silent:
-
they have something they shouldn't and miss one thing. i'm not saying because it's easily altered and you are obviously devoid of moral fiber that would prove you worthy of such valuable knowledge. but to the trained eye, it's like a shining beacon of deception clear for the knowledgeable to see. better you don't know, otherwise somebody will be deceived. :yahoo_silent:
There not missing a grated stem becos these are bob Haro bars!!!!! Your talking about vector bars ,,,,,,,,,,,,these bars are bob Haro bars made after he left vector,,,,,,,,,and there is 2 differences to some1 that does have knowledge,,,,,,,the 1st difference is there is no grating for grip on the lower stem!!!!!!! And the 2nd difference is that after leaveing vectors sponsorship bob Haro put a 8 Degree better angle for leg room,,,,,,,these bars weigh 2lb 3oz measure 28in in width And a 8in rise,,,they are stamped cro mo made in Taiwan,,,and I know for FACT that these bars bob Haro reproduce in 1982 and made them in Taiwan just as he did many frames,,,,,,,,,,,
So are you saying that bob Haro stopped making these bars after leaving vectors sponsorship????
What evidence do you have to prove me wrong???
Are you saying there's only 1 real type of bar???
Can you put paper evidence I front of us all???
Well I can !!!!
Prove me or any information I have quoted wrong?????.
-
Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
this is my number anyone wants to phone me and prove me wrong then your more then welcome 07572 ?Here is another fact.
If someone wins your bars and proves they are fake...... You will be £350 out of pocket :LolLolLolLol:
do some research nout to do with any of you
Where's you proof there fake????????
How do we tell if there fake then?????????
Prove me wrong
this is my number anyone wants to phone me and prove me wrong then your more then welcome 07572 742 020
If no one as any evidence how to prove these are fake bars then it's all wind and air haha
I'm asking for your proof?????
Just to close this one down before it goes on and on and on etc.
It is all well and good asking for people on here to give you proof that they are fake (and I see your point of view even if I don't agree).
BUT at no stage have you shown any proof that they are real other than saying that Haro was sponsored for 2 years only by Vector and then he made these in Taiwan.
Where is the proof of this other than your word? What research did you do and where can we find it?
742 020
If no one as any evidence how to prove these are fake bars then it's all wind and air haha
I'm asking for your proof?????
Just to close this one down before it goes on and on and on etc.
It is all well and good asking for people on here to give you proof that they are fake (and I see your point of view even if I don't agree).
BUT at no stage have you shown any proof that they are real other than saying that Haro was sponsored for 2 years only by Vector and then he made these in Taiwan.
Where is the proof of this other than your word? What research did you do and where can we find it?
There's tons and tons on this subject on bmx museum for 1 and pics dates everything just on that site alone
-
And I think people do have to prove me wrong if there saying all over rad that there fake where's the proof????
I wouldn't list something forsale without finding out what they are down to a t!!!!!!!
I'm not other so called rad sters!!!!
If I'm selling something its described proply
-
And I think people do have to prove me wrong if there saying all over rad that there fake where's the proof????
I wouldn't list something forsale without finding out what they are down to a t!!!!!!!
I'm not other so called rad sters!!!!
If I'm selling something its described proply
I'm going to try and upload pictures and prices and weight sizes all dated 1981 82 83 all about vectors and these bars
I understand what your all saying but really you need to look into things before acuseing people of selling fake things,,,,,
I never judge until I have evidence!!!
And I would never sell something that wasn't describe correct!!!!! Unlike Kappy!!!!!
-
You keep going Robbie ............... post count is shooting up , you'll have two stars by 8am !! :D
-
You keep going Robbie ............... post count is shooting up , you'll have two stars by 8am !! :D
are you still reading cos I can keep writing haha
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
Mate you ain't a clue I'm going to upload pics from vector off bmx museum dated of the sale of these bars! Thought you was mr Haro???
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
Or better still pm me your email and I will mail them all to you because I've printed all off,,,,,,dated sales books from vector and Haro!!!!!!!
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
Prove me wrong so I can laugh at you lot at mk please please try show me some evidence that what I'm sayin is wrong!!!!!
-
I know all about the 82 Vector ad with the Bob Haro replica bars, you don't need to post a pic, they have a lower crossbar, look at yours compared to them yours have a high crossbar and the stem shaft is much taller above the base of the bars. Oh yeah they are made by Vector and did not have Taiwan stamped on.
-
Here you go, its called a link.............
http://bmxmuseum.com/forums/viewtopic.php?id=30033 (http://bmxmuseum.com/forums/viewtopic.php?id=30033)
-
Here you go, its called a link.............
http://bmxmuseum.com/forums/viewtopic.php?id=30033 (http://bmxmuseum.com/forums/viewtopic.php?id=30033)
Cheers for that but there's other pages to,,,,,,,and my bars look funny in the pic because took of a iPad,,,,,,,,,anyone that wants to come take a look or weigh or measure is more then welcome!!!!!
And bob Haro did make these bars in Taiwan,,,,,,,,,,there not the 1st vectors that your all cheating about
-
Here you go, its called a link.............
http://bmxmuseum.com/forums/viewtopic.php?id=30033 (http://bmxmuseum.com/forums/viewtopic.php?id=30033)
Cheers for that but there's other pages to,,,,,,,and my bars look funny in the pic because took of a iPad,,,,,,,,,anyone that wants to come take a look or weigh or measure is more then welcome!!!!!
And bob Haro did make these bars in Taiwan,,,,,,,,,,there not the 1st vectors that your all cheating about
And he made them after leaveing vector!!!!!!!!! Haha
I ain't out to make people look silly
I just really did research before selling!!!!!
And where's all the proof that bob never made these after leaving vector?????
-
Here you go, its called a link.............
http://bmxmuseum.com/forums/viewtopic.php?id=30033 (http://bmxmuseum.com/forums/viewtopic.php?id=30033)
. And if you knew!!!! You must just of forgot about that dated picture of bob haro using them bars in 1982 because I'm sure you just said he never?????????
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
If bob Haro didn't even ride with vector bars in 1982 how can I have pictures dated 1982 with him using them ????? And magazines with him jumping using these bars in 1982???? Are all these fake as well??????
Jeez gotta watch out for all these fakes in bmx now haha made in china hahaha
-
Yeah late 82,actually from pics i have,just going from memory, so i shouldn't have said never. woopee.Haro didn't use tai production until 1984 aswell.
-
Show me an ad or evidence with your actual bars that were made in taiwan .
-
Yeah late 82,actually from pics i have,just going from memory, so i shouldn't have said never. woopee.Haro didn't use tai production until 1984 aswell.
Dude you know I'm right don't ya lol. It don't matter!!!!!!
But you know as well as me bob Haro made my bars and you all welcome to come look as I said,,,,,,,,,,,the pic is took off a iPad and does look abit dodgy layin on table,
But I've measured and weighed them,,,,,,and done all the research !!!!
I do understand people get mixed up but I am right!!!!! And 1982 is 1982 not matter early or late it's still 1982
-
Show me an ad or evidence with your actual bars that were made in taiwan .
No you prove they never made them in Taiwan after bob left sponsorship!!!!!!! Just like his frames!!!!!! And jay them pics in the link you just uploaded you know the 1s in the 1982 adverts of these bars how come they don't have the kNurling on the bottom of stem!!!!!!!! You know the 1s in the shiny clear as day pictures????????
-
MMMMMM Sept 82 BMX Action has that early ad in, can't find it in any earlier ones, Cool.
Can't find your bars in any of the magazines though.
-
MMMMMM Sept 82 BMX Action has that early ad in, can't find it in any earlier ones, Cool.
Can't find your bars in any of the magazines though.
Lol jay dude what do the 1s you called real!!!! Weigh and size in inches please?????
-
Don't know exactly when the bars had the Knurling date wise, but the earlier ones didn't have Knurling.
(http://www.radbmx.co.uk/archive/albums/q66/harogenone/P4080516.jpg)
-
MMMMMM Sept 82 BMX Action has that early ad in, can't find it in any earlier ones, Cool.
Can't find your bars in any of the magazines though.
Lol jay dude what do the 1s you called real!!!! Weigh and size in inches please?????
And jay I have a 1985 master made in Taiwan with all original paint n stickers,,,,,,,,,,,,,in all the adverts does it say made in Taiwan??????
-
No, it doesn't say made in taiwan, but atleast there is a picture to go off.
I'm still waiting for a picture of bars the same as yours, any luck yet.
-
No, it doesn't say made in taiwan, but atleast there is a picture to go off.
I'm still waiting for a picture of bars the same as yours, any luck yet.
listen I been tryin to upload pictures,,,I need to upgrade this rad account??????
These bars are the right weight size width depth and same on the rise,,,,I've printed off a few pages where it states that bob Haro started having these made in Taiwan after leaveing vector and there's also evidence of that on bmx museum on other pages!!!!!
I know for a fact that Haro never ever put made in Taiwan on adverts!!!!!! But after 1893 bob knew that was cheaper to produce frames bars and all his stuff in Taiwan and ship out from there!!!!!!!
You all trying hard to make me look bad and there's really no need!!!!!
I checked the bars befor listing them and I'm not out to mislead anyone!!!!!!!
The link you posted is just 1 link and a few adverts but I room pics and printed loads off as well,,,,,,can you please weigh and measure you bars up against mine jay????
-
No, it doesn't say made in taiwan, but atleast there is a picture to go off.
I'm still waiting for a picture of bars the same as yours, any luck yet.
listen I been tryin to upload pictures,,,I need to upgrade this rad account??????
These bars are the right weight size width depth and same on the rise,,,,I've printed off a few pages where it states that bob Haro started having these made in Taiwan after leaveing vector and there's also evidence of that on bmx museum on other pages!!!!!
I know for a fact that Haro never ever put made in Taiwan on adverts!!!!!! But after 1893 bob knew that was cheaper to produce frames bars and all his stuff in Taiwan and ship out from there!!!!!!!
You all trying hard to make me look bad and there's really no need!!!!!
I checked the bars befor listing them and I'm not out to mislead anyone!!!!!!!
The link you posted is just 1 link and a few adverts but I room pics and printed loads off as well,,,,,,can you please weigh and measure you bars up against mine jay????
Sorry 1983 started making frames and bars in Taiwan because was cheaper to mass produce
-
No, it doesn't say made in taiwan, but atleast there is a picture to go off.
I'm still waiting for a picture of bars the same as yours, any luck yet.
listen I been tryin to upload pictures,,,I need to upgrade this rad account??????
These bars are the right weight size width depth and same on the rise,,,,I've printed off a few pages where it states that bob Haro started having these made in Taiwan after leaveing vector and there's also evidence of that on bmx museum on other pages!!!!!
I know for a fact that Haro never ever put made in Taiwan on adverts!!!!!! But after 1893 bob knew that was cheaper to produce frames bars and all his stuff in Taiwan and ship out from there!!!!!!!
You all trying hard to make me look bad and there's really no need!!!!!
I checked the bars befor listing them and I'm not out to mislead anyone!!!!!!!
The link you posted is just 1 link and a few adverts but I room pics and printed loads off as well,,,,,,can you please weigh and measure you bars up against mine jay????
Sorry 1983 started making frames and bars in Taiwan because was cheaper to mass produce
So jay....?????. Bob didn't reproduce these bars after leaveing sponsorship with vector???
And they never made them in Taiwan????
And bob wasn't aloud to use the name vector after leaveing?????
Is that what your all saying yes????
-
I'm not trying to make you look bad, I'm just trying to tell you what i know,.
Haro never reproduced Vector style bars, full stop......
Vector was still using Bobs name in 85, why would he want to use the name Vector, not sure what your getting at
-
I'm not trying to make you look bad, I'm just trying to tell you what i know,.
Haro never reproduced Vector style bars, full stop......
Vector was still using Bobs name in 85, why would he want to use the name Vector, not sure what your getting at
No he didn't want to use there name!!!!!!!!!! Because he made these bars alongside vector when he left he had to use the name!!!!! Bob Haro replica bars!!!!!! Just because he wasn't sponsored by vector anymore!!!!! He then produced them in Taiwan in stead of the states because was cheaper to mass produce!!!!!! Vector still sold there's bars!!!! It is confusing but there the facts!!!! Even tho bob designed them!!! After leaving vector he had to rename them!!! Bob Haro replica bars!!!!! Vector bars basically means while bob was sponsored!!!! Bob Haro replica!!!!! Are bars made after he left vector!!!!! If that's any help!!!!!!!
-
Don't know exactly when the bars had the Knurling date wise, but the earlier ones didn't have Knurling.
(http://www.radbmx.co.uk/archive/albums/q66/harogenone/P4080516.jpg)
can i dib them before kappy see's them ;D ;D :LolLolLolLol: :LolLolLolLol:
-
If you use another feckin explanation mark in anymore of your post's, I will ban you ok !!!!!!!
And don't think I'm joking either
-
8 degree better angle for leg room, you having a laugh, those bars sit further back than vectors, In 1982, bob Haro hadn't even rode with Vectors on.
Mate you ain't a clue I'm going to upload pics from vector off bmx museum dated of the sale of these bars! Thought you was mr Haro???
Thats soo funny
If JAY don't know Haros then we might as well give up.
Those bars are copies, i had a pair of both, and they are same as my fake ones, whoever buys the bars is gonna get ripped
-
Robbie, you don't need to upgrade anything on here to upload pictures. Just open up a free photoshop account and upload them to that, then copy the bottom code and paste it into your thread.
Looking forward to seeing your pictures :daumenhoch:
-
Robbie
As a person who is selling the bars then you need to show evidence that they are real. There is evidence shown on here by others that show they are fake, so far you have shown nothing, no pictures, no links....nothing.
All you want people to do is take your word for it, simply because you think you know you are right.
That is not good enough, if you cannot produce any evidence that you can show on here that PROVE 100% that what you say is correct then you are a con artist, simple as.....
Over to you...........
-
They are snide.
You know why?
Because I said so.
Prove me wrong.
-
If they are stamped made in Taiwan, I think you should mention that in your listing.
-
I missed the first thread so glad to have the sequel to read.
Got to say he does argue a good point. But overall measurements dont make them real, lots of bars have the same overall size.
Would it not just be easier to settle it by asking Mr Bob himself?
Either way £350 is a lot of money to be talking about if they are fake. If it turns out they are fake then im selling my real ones ;D
-
BMX was accidentally invented by Bob Carolgees in 1968 when he was trying to come up with an idea for a new vulgar hand based puppet.
No one knew, until some guys in California found the idea and stole it
True that
-
Problem is, there is no evidence that Haro ever made Vector style bars.........NONE
I could make the same argument about the copy Haro freestyler frames. Bob decided to have the Freestyler made in Taiwan because they were cheaper to mass produce over there in 1982/83, rather than having them made by Torker. I have no evidence to support this but it's FACT.........
-
so that one that Skyway4man had up for £500 was a bargain then Jay! bugger and i missed out! >:(
-
If Bob Haro made his own bars, why the feck did he always use Vectors and not his own Tai made swept back sticky out bolt version.
(http://www.radbmx.co.uk/archive/albums/q66/harogenone/bobharox.jpg)
-
oh yeah, he didn't want to loose his Vector co sponsor .
-
Those ones in the pic Jay are clearly fake. the sweep back is in the wrong direction.
-
Yeah, We'll talk to Bob, see what the crack was with the idea behind the original Replica bars, there are some gaps that need filling with the progression of the early versions to the signature versions. But nothing to do with those copy bars.
-
Problem is, there is no evidence that Haro ever made Vector style bars.........NONE
I could make the same argument about the copy Haro freestyler frames. Bob decided to have the Freestyler made in Taiwan because they were cheaper to mass produce over there in 1982/83, rather than having them made by Torker. I have no evidence to support this but it's FACT.........
Wrong again jay lol. Wait to I worked out how to do this upload !!!!!!!!
You can't prove me wrong!!!!!!!!
You know I'm right!!!!!!
I will prove you wrong wen can upload pic!!!!
Lol u lot know diddly
Jay knows I'm right
And basically your gutted!!!!!!
And not 1 of you can show me evidence to where they are snide!!!!
Your all thick lol proper plonkerssssssssssssss
Not 1 of you can prove me wrong or yet still JAY keeps anwsering my questions with questions because he knows I'm bang on the ball!!!!!!!!!!
Oh let's all answer with a norther question!!!!!! Get a life you lot
Wrong wrong wrong wrong
Mr collectors no not very much about history!!!!!!!!!!
I got you wrong a few times last nite jay!!!!!!
Prove me wrong!!!!!!!!!
-
Yeah, We'll talk to Bob, see what the crack was with the idea behind the original Replica bars, there are some gaps that need filling with the progression of the early versions to the signature versions. But nothing to do with those copy bars.
Hahhahahahaha. You gonna swallow your words jay,,,,,,,,,,,go ask bob Haro and wen you do I want a public sorry at mk!!!!!!!
-
Yeah, We'll talk to Bob, see what the crack was with the idea behind the original Replica bars, there are some gaps that need filling with the progression of the early versions to the signature versions. But nothing to do with those copy bars.
The crack behind the rep bars is!'!!!!!!!!!!!
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!!
If you didn't know that he had to do this for legal reasons then do not ever try correct me cos you know nothing about haros history
-
Email the pics to me, I'll upload them, what pics are they? I might have them
If you right, then great, no big deal to me, Thats why i use these this site , to learn, I don't know everything, just what i learn and remember like everyone else.
-
So when did Bob end his Vector deal ?
-
You have to ask questions Robbie, to find answers :daumenhoch:
-
So when did Bob end his Vector deal ?
He only rode with them for 2 seasons lol. I thought u was the man jay
Hahahaha you know a lot BBBBUUUUUTTTTTTTTTTTTTT not everything your wrong!!!!!
-
I thought the point was that another company which had nothing to do with Bob Haro or Vector produced some snide bars in the 80's.
Can't remember the name of the company but remember reading about them a few years back.
Isn't this what it's all about.
-
So when did Bob end his Vector deal ?
Jay I'm not arguing
Are you saying bob was sponsored for more then 2 years by vector?????
Are you saying he never mass produced these after leaveing vector in Taiwan?????
Right who wants to put there money where there mouth is on this 1 ?????????
Who on here wants to put cash on the table on this 1 ??????
-
Robbie
if you continue to be a tit and cary on with the childish attitude and insults
I WILL BAN YOU FROM THIS SITE
I am all for healthy debate and asking questions but if you continue to act like a 5 year old then goodbye .
And that is the first fact on this thread :)
have a nice day
-
Surely the answer is in the name of the bars? Replica
As taken from the oxford dictionary:
"noun
*
an exact copy or model of something, especially one on a smaller scale: a replica of the Empire State Building
*
a duplicate of an original artistic work."
-
Robbie
if you continue to be a tit and cary on with the childish attitude and insults
I WILL BAN YOU FROM THIS SITE
I am all for healthy debate and asking questions but if you continue to act like a 5 year old then goodbye .
And that is the first fact on this thread :)
have a nice day
Bann me from what you want????. I'm stating facts
If no1 can pro e me wrong then that shows nothing hahaha
-
So when did Bob end his Vector Deal? ????
Oh regards the vectors in 82, i still can't find any pics of him riding with them in 82, just the Vector ad which is a bit weird. Seems he went from Vectors to redline in 83, then back to vectors, so might be something behind the change of style with these bars, but still no pictures of the bars you have.
Send me those pictures robbie, I'm interested in seeing them
-
Yawn, ffs another pointless thread about fake shit on egay. Jay and everyone else knows they are copies, Jay especially as being collector Haro longer than anyone I know. Tons of these bars were about years ago, faked up in Taiwan, shame the old rad sale threads have gone because there were loads around years ago for about £30 and no fooker wanted them because they were Fake. Fact is they look bad, shape ain't right, stem bolt ain't right, sale stinks bigtime but best of luck with your sale.
-
Yawn, ffs another pointless thread about fake shit on egay. Jay and everyone else knows they are copies, Jay especially as being collector Haro longer than anyone I know. Tons of these bars were about years ago, faked up in Taiwan, shame the old rad sale threads have gone because there were loads around years ago for about £30 and no fooker wanted them because they were Fake. Fact is they look bad, shape ain't right, stem bolt ain't right, sale stinks bigtime but best of luck with your sale.
Listen my weigh 2lb 3oz there are 28in in width and have a 8in rise,,,,,,,,what do the fake 1s have
-
Yawn, ffs another pointless thread about fake shit on egay. Jay and everyone else knows they are copies, Jay especially as being collector Haro longer than anyone I know. Tons of these bars were about years ago, faked up in Taiwan, shame the old rad sale threads have gone because there were loads around years ago for about £30 and no fooker wanted them because they were Fake. Fact is they look bad, shape ain't right, stem bolt ain't right, sale stinks bigtime but best of luck with your sale.
Listen my weigh 2lb 3oz there are 28in in width and have a 8in rise,,,,,,,,what do the fake 1s have
Oh yh jay that as collected longer then anyone you know!!!!!!!
Was wrong to me about dated pictures of bob using the bars!!!!
Oh it must of been cos it was LATE 1982 hahahahah
BROWN NOSING AIN'T PART OF ME IM ONLY STATING FACTS,,,,,,,,
Prove me wrong
Ol you can't
-
Yawn, ffs another pointless thread about fake shit on egay. Jay and everyone else knows they are copies, Jay especially as being collector Haro longer than anyone I know. Tons of these bars were about years ago, faked up in Taiwan, shame the old rad sale threads have gone because there were loads around years ago for about £30 and no fooker wanted them because they were Fake. Fact is they look bad, shape ain't right, stem bolt ain't right, sale stinks bigtime but best of luck with your sale.
Listen my weigh 2lb 3oz there are 28in in width and have a 8in rise,,,,,,,,what do the fake 1s have
I have two sets of vectors, early and later, the shape are nothing like yours regardless of the weight. If I remember right there was a firm in the UK back in the day that used to bang these copies out, sure someone on here has a pic in their photobuckets as there was a big discussion about this years ago. That UK firm made bars same width, same height, roughly same weight but sweep was different and they used a tall stem bolt too, welds were also awful, nothing like real vectors.
-
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!! and the cow jumps over the moon :crazy2:
-
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!! and the cow jumps over the moon :crazy2:
Haha bro you know nothing there's even adverts from 1982 stating there bob Haro replicas!!!! And that's on vectors advert that jay posted last nite!!M hahaha really mate???
-
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!! and the cow jumps over the moon :crazy2:
True! Also Vector had loads of bars with Bob's sponsorship on them so they made up new decals saying UNLIMITED and at times stuck the decal straight over the old one. Sure Steve P had some of these on here.
-
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!! and the cow jumps over the moon :crazy2:
Haha bro you know nothing there's even adverts from 1982 stating there bob Haro replicas!!!! And that's on vectors advert that jay posted last nite!!M hahaha really mate???
Replica's yes because they were a replica of Bob's design, but not fakes/copies which had different welds, sweep, shape and stem bolt altogether.
-
They are snide.
You know why?
Because I said so.
Prove me wrong.
This ^ prove him wrong
-
Yawn, ffs another pointless thread about fake shit on egay. Jay and everyone else knows they are copies, Jay especially as being collector Haro longer than anyone I know. Tons of these bars were about years ago, faked up in Taiwan, shame the old rad sale threads have gone because there were loads around years ago for about £30 and no fooker wanted them because they were Fake. Fact is they look bad, shape ain't right, stem bolt ain't right, sale stinks bigtime but best of luck with your sale.
Listen my weigh 2lb 3oz there are 28in in width and have a 8in rise,,,,,,,,what do the fake 1s have
Oh yh jay that as collected longer then anyone you know!!!!!!!
Was wrong to me about dated pictures of bob using the bars!!!!
Oh it must of been cos it was LATE 1982 hahahahah
BROWN NOSING AIN'T PART OF ME IM ONLY STATING FACTS,,,,,,,,
Prove me wrong
Ol you can't
Whatever!, still can't find pics of him using the Vectors in 82 apart from that AD which i thought was in a 83 mag to be honest, but turns out Sept 82, so what........It still has nothing to do with the bars you have and you still haven't answered any of my questions or sent any pics. I'm happy for you to prove me wrong, i'm here to learn.
-
Bob Haro had to rename after leaveing sponsorship with vector!!!!!!!!
To bob Haro replica!!! and the cow jumps over the moon :crazy2:
True! Also Vector had loads of bars with Bob's sponsorship on them so they made up new decals saying UNLIMITED and at times stuck the decal straight over the old one. Sure Steve P had some of these on here.
Thats correct, i had some. Alot of these came out of Rainers, think Biagio bought a load years back.
-
Robbie why don't you just put up this pic you have to prove us all wrong then ;) come lets see it do you have it .lets see your proof :daumenhoch:
-
he has his word, what more do you need?
-
Hummm looks like only two people are bidding on them :coolsmiley:
My my they have pushed the price up ???
-
Ooooooh those ebay fees ;D
-
Hummm looks like only two people are bidding on them :coolsmiley:
My my they have pushed the price up ???
Haha you lot are sad!!!!!
They sell for what they make!!!! Check all the bid history no1 pushed nothing up,,,,,,,it's just good there is a worldwide web and not everyone is so Nieve to know the real history of bob Haro,,,,,,,,,,I ain't tried to make anyone look stupid,,,I never started this,,,,your all sayin my bars are fake???? Then prove this,,,,I have original adverts just as jay does stating these bars are called bob Haro replica!!!!! He had to change name after leaveing sponsorship if you lot can't understand this then that's not my problem,,,,I ain't outntonprove to you lot nothing nor do I have to!!!!!!
Your the 1s that saying there fake!!!!
Like i say,,,,,my bars are bob Haro replicas!!!!! There not fake!!!! Just means bars made after sponsorship!!!!
To anyone with any knowledge understands this !!!!
There is clear evidence even in the pictures that jay posted that I'm right!!!!
I don't care either way really apart from everything I have quoted is correct!!!! If your all to long in the tooth to take this as education
And learn a little more then that's not my problem either!!!!
I do understand what a few of you are saying!!!!
It is a bit confusing!!!
But never the less bob Haro made these bars after he stopped sponsorship with vector and had to rename as bob haro replica just for legal reasons!!! They were made alongside many of his frames also out of Taiwan just because was cheaper for bob to produce and ship out of Taiwan,,,,,,,,vector bars was only ever made in Knoxville America!!!
-
So they are the ones off this Haro Ammaco that you bought? I'm sure that dweebs have started BREEDING on ebay..... :2gunsfiring_v1:
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1392
-
you keep saying the same thing :idiot2: But still no proof :wtf: If you have this proof just put it on here and end this thing :daumenhoch:
-
or email Jay the pictures and he can put them up as he knows how to use photobucket ;D
-
or email Jay the pictures and he can put them up as he knows how to use photobucket ;D
So they are the ones off this Haro Ammaco that you bought? I'm sure that dweebs have started BREEDING on ebay..... :2gunsfiring_v1:
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1392
So they are the ones off this Haro Ammaco that you bought? I'm sure that dweebs have started BREEDING on ebay..... :2gunsfiring_v1:
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1392
Yes there them bars!!!! I never said they wasn't!!!!
I got the ammaco to restore as is a rare frame!!!
Ask me any questions I will only answer honestly haha I have no reason to lie!!!
And gtbill wtf as this gotta do with you if you have no evidence do 1
Less of the dweebs because I will see you lot on a ride and will clock your names I ain't a twat you bad mouth me it will be feisty cuffs
at next show
Noooo need I know I'm bang on the ball just as I was with jay last nite and he got it wrong,,,,like I said you keep asking me for proof,,,,,you all show me the proof there fake or do one cos your all petty haha get a real life
-
I'll say again, Bob Haro Replica bars were a replica of Bob's original design hence the name adopted by Vector, but they were made by Vector. Your bars for sale have the wrong shape/sweep, they are also not Vector Unlimited bars, the name of the real Vectors after Bob left the sponsorship.
I have no doubt that the welds on your bars are shocking and not neat like Vectors, just seeing that stem bolt on its own I see they are fake.
Place over real Vector bars and you will see the difference in the design. The reason why lots of very experienced people on here said they are fake is because they are and it doesn't take 5 pages of drivel to understand that.
Best of luck with your sale.
-
If that's a threat, then you can feck off from here, in fact, ta ta !
-
or email Jay the pictures and he can put them up as he knows how to use photobucket ;D
So they are the ones off this Haro Ammaco that you bought? I'm sure that dweebs have started BREEDING on ebay..... :2gunsfiring_v1:
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1392
So they are the ones off this Haro Ammaco that you bought? I'm sure that dweebs have started BREEDING on ebay..... :2gunsfiring_v1:
http://www.ebay.co.uk/itm/320904514351#ht_686wt_1392
Yes there them bars!!!! I never said they wasn't!!!!
I got the ammaco to restore as is a rare frame!!!
Ask me any questions I will only answer honestly haha I have no reason to lie!!!
And gtbill wtf as this gotta do with you if you have no evidence do 1
Less of the dweebs because I will see you lot on a ride and will clock your names I ain't a twat you bad mouth me it will be feisty cuffs
at next show
Noooo need I know I'm bang on the ball just as I was with jay last nite and he got it wrong,,,,like I said you keep asking me for proof,,,,,you all show me the proof there fake or do one cos your all petty haha get a real life
Jog on you Muppet you are trying to rip people off selling your FAKE SHIT and can't even put the Proof this is a members forum we can post on any thread :rant: as i said Jog on Muppet
and take your fake bars with you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Thread locked and Robbie is now serving a 7 day ban to cool off........