RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: kungfunky on June 03, 2012, 07:56 PM
-
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all :daumenhoch: Ohh and
(http://i1204.photobucket.com/albums/bb413/kungfunky/0019-2.jpg)
the gunk was on for around 3 mins at this stage.
(http://i1204.photobucket.com/albums/bb413/kungfunky/0024.jpg)
(http://i1204.photobucket.com/albums/bb413/kungfunky/003-7.jpg)
-
That is what I use too Ash, it will even remove some powdercoat.
-
is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much ;D
-
is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much ;D
Cost me a fiver from local car paint suppliers.
-
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids :daumenhoch:
-
carb cleaner removes powder coat !
-
i am jack's dissapointment at thread content :-\
i used nitromoors the other week and it worked fine. problem is i needed that thick a layer it used more than £17 worth to strip a frame. i'll be happy if this works because i've got 2 more to do.
-
Worked fine for me on a powdered alloy frame John, not tried it on any other material yet though.
-
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids :daumenhoch:
Protective glasses too!!! :LolLolLolLol: Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!
-
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids :daumenhoch:
Protective glasses too!!! :LolLolLolLol: Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!
your one eye ? ???
-
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all :daumenhoch: Ohh and
(http://i1204.photobucket.com/albums/bb413/kungfunky/0019-2.jpg)
the gunk was on for around 3 mins at this stage.
(http://i1204.photobucket.com/albums/bb413/kungfunky/0024.jpg)
(http://i1204.photobucket.com/albums/bb413/kungfunky/003-7.jpg)
ash get with the programe i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good :daumenhoch:
-
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all :daumenhoch: Ohh and
(http://i1204.photobucket.com/albums/bb413/kungfunky/0019-2.jpg)
the gunk was on for around 3 mins at this stage.
(http://i1204.photobucket.com/albums/bb413/kungfunky/0024.jpg)
(http://i1204.photobucket.com/albums/bb413/kungfunky/003-7.jpg)
ash get with the programe i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good :daumenhoch:
we're still in 1986 right Dan ::) ;D
-
Woody told me to use 'MR MUSCLE" spray on a set of SE cranks 30mins later it just feel off thick nasty black paint the rest wiped off put the cranks in a carrier bag smothered them in MR MUSCLE rolled them up in the bag and hey presto! rises off in hot tap water and dried them, polish up on a lath with a buffer and buff in compound.job done not mirror finish as didn't have rouge polish.