RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Clean on June 27, 2012, 02:12 PM
-
RADsters,
I have a Bottom Bracket Ball Bearing rattling up and down the downtube of my current build (ask Spen for details); you can imagine it is slightly annoying. :knuppel2:
My plan is to use metal glue squeezed through the little hole in the BB Shell that the bearing sneaked (euphemism) through to glue the pesky little mo-fo to the inside of the downtube / shell. 8)
The glue can't be too viscous - such as a paste - as I plan to inject it through the hole (5-7mm diameter, I would say) using a syringe. I am hoping a big dollop will set up with the little bugger secured within. ;)
I am currently considering Evo-Stik Liquid Metal or Araldite Rapid Steel; any thoughts? :-\
What is the best metal glue for this job? :coolsmiley:
Thanks,
Clean.
-
how about waxoyl ???
-
I like the rattle Rich. It wil cover up the other rattles from all the loose nuts amd bolts when you've finished building it with your Fischer Price tools..... ;-D
Why not just squeeze a bath sealant into it? Bring it back round and i'll sort it for you mate....
-
I like the rattle Rich. It wil cover up the other rattles from all the loose nuts amd bolts when you've finished building it with your Fischer Price tools..... ;-D
:yahoo_silent:
Why not just squeeze a bath sealant into it? Bring it back round and i'll sort it for you mate....
Bath sealant; now that's a thought..... :daumenhoch:
-
try a magnet over the hole and give the frame a rattle. it worked for me in the past. :daumenhoch:
-
magnet ???
-
Squirt some expanding foam in the tube.
-
Squirt some expanding foam in the tube.
:daumenhoch:
-
For anyone interested, common or garden Super Glue did the trick. ;)
Frame is now rattle free! :daumenhoch:
-
they always come out.. you did nt shake the fuker enough !! :tickedoff: