RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: markyp on July 19, 2012, 10:04 AM

Title: zeronine stadium plate to cw bars
Post by: markyp on July 19, 2012, 10:04 AM

ok, i can see now why my mate bitd chopped off the top  tabs of his zeronine so that it would fit straight across the top of his cw bars,but my question is how the fook do you get those top tabs to stay velcroed down,the sizes are all wrong,do you need longer velcro to get the leverage and im guessing you have to bend the life out of the top tabs to train them to stay back?any help appreciated chaps :D

Title: Re: zeronine stadium plate to cw bars
Post by: Gnarlyscoots on July 19, 2012, 10:28 AM

Just sell that plate to me Mark and all your problems will be resolved buddy  :daumenhoch:

Title: Re: zeronine stadium plate to cw bars
Post by: Andy68 on July 19, 2012, 10:36 AM

Quote from: Londonhellboy on July 19, 2012, 10:28 AM

Just sell that plate to me Mark and all your problems will be resolved buddy  :daumenhoch:

But then you'll struggle, get angry and want rid so just sell it to me Mark!!!  :LolLolLolLol:

Title: Re: zeronine stadium plate to cw bars
Post by: markyp on July 19, 2012, 10:44 AM

thats one solution but not alot of help ;D

Title: Re: zeronine stadium plate to cw bars
Post by: steve69 on July 19, 2012, 11:02 AM

I put a 'moto-control' on mine for the same reason.


that's not a lot of help either  ::) but i wouldn't chop the ears of it and spoil a good plate

Title: Re: zeronine stadium plate to cw bars
Post by: dordymush on July 19, 2012, 11:11 AM

i heated up my one bitd with a hair drier to get the bend.
but the plates were only about a tenner back then so never bothered about fooking it up  :LolLolLolLol:

Title: Re: zeronine stadium plate to cw bars
Post by: markyp on July 19, 2012, 12:34 PM

i reckon cable ties would do the job,underneath the velcro :(

Title: Re: zeronine stadium plate to cw bars
Post by: stevochb on July 19, 2012, 12:55 PM

Quote from: markyp on July 19, 2012, 12:34 PM

i reckon cable ties would do the job,underneath the velcro :(

X2  :daumenhoch:

Title: Re: zeronine stadium plate to cw bars
Post by: M5AT on July 20, 2012, 11:13 AM

Yeah, I chopped the ears off mine BITD, think everyone did, just stick it on like this?

(http://www.radbmx.co.uk/archive/albums/kk44/M5AT/09.jpg)

Title: Re: zeronine stadium plate to cw bars
Post by: markyp on July 20, 2012, 12:30 PM

im gonna cable tie it,been looking at pics from bitd and the pros seem to have been able to bend the ears over the cw's :)

Title: Re: zeronine stadium plate to cw bars
Post by: dordymush on July 20, 2012, 11:04 PM

they do look better bent over the bars.
but go steady cause they crack real easy  :-\

Title: Re: zeronine stadium plate to cw bars
Post by: hunterdubber on July 20, 2012, 11:12 PM

Andy Patterson used to run Zeronine plates on CW's bars on his T/A

tabs cut off  ;)


But I immediately thought the same as Dords

get the hairdryer on it  :daumenhoch:

A good  blowjob works everytime  :smitten:

Title: Re: zeronine stadium plate to cw bars
Post by: hunterdubber on July 20, 2012, 11:24 PM

(http://img280.imageshack.us/img280/2056/pontinsskyway8315ed.jpg)