RADBMX.CO.UK

BMX General => BMX Chat => Topic started by: markyp on September 26, 2012, 03:40 PM

Title: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 03:40 PM
Those of you who clocked my van either here or at mk will know ive got a bit of a thing for the Pattys.having already built an 82 long i just had to add the next gen of patterson the pr200 to my stable.The pr200 was tested in ABBMX back in the summer of 83 and with it being one of the first magazines i bought it meant that the pr200 always stuck in my mind.
                                               I had this one shipped over from the states back in april,i paid top dollar but with it being beautiful survivor chrome it was well worth it,with a bit of a tickle shes come up a treat,you just cant beat the original finish,not just because its authentic but because its so much thinner meaning you can admire all the details on the welds and also see the hoops the polishing mop left!
                                                Not long after snagging this i managed to grab a set of uber rare much discussed usa made patterson pro bars,they were on a complete which was saved from a chicago dump!!!there is alot of rumour that the patterson pro bars are identical to the early gt,WRONG!!! They are the same as the second gens,like the 84 pro series came with but they have a thinner higher cross bar.
                                               Although a beautiful and iconic bike i cant help thinking that the pr200 was almost a step backwards as far as patterson were concerned.they ditched the low sleek style of the previous generations and went for a more upright design,with gt being the builder for patty (hence the handlebars and check out the front and rear dropouts too!!) i cant help but think it was a case of just generating revenue rather than about performance,anyway enjoy!!!



PARTS LIST

1984 PATTERSON PR200 PRO FRAMESET WITH ORIGINAL CHROME
RECHROMED USA MADE PATTY PRO BARS
PRO NECK STEM
EPOCH HEADSET
OAKLEY.5 GRIPS WITH BUTT PLUGS
DC TECH 3/DC1020 CALIPER/DC 84 STAMP CABLE
SUNTOUR SEAT CLAMP
RECHROMED DIMPLE/FULL WRAP/SINGLE PINCH 180MM FLIGHTS
POLISHED REDLINE CHAINWHEEL 43T
SHIMANO DX PEDALS
IZUMI CHAIN
KNARLER KNOBBY TYRES 1.5
UNI PRO CHAIR
ARAYA 7X 1.75
SUZUE HUBS
REPRO PADSET
ZERONINE STADIUM PLATE(THANKS GAZ POOLY!!)

(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260016.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260014.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260013.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260020.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260019.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260018-1.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260017.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260025.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260021-1.jpg)

AND WITH OLDER SISTER THE 82 LONG
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260001.jpg)

AND THE PATTY MOBIL!
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P2060001.jpg)
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Devilock on September 26, 2012, 03:43 PM
Lovely Mark.  :daumenhoch:

You beat me to it!

So this will be in October BOTM...?  ;)
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 03:44 PM
Lovely Mark.  :daumenhoch:

You beat me to it!

So this will be in October BOTM...?  ;)

probably Rich,come and ave a go if you think youre hard enough!!! :2funny:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Taipan on September 26, 2012, 03:49 PM
Beautiful!  :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: meticulous on September 26, 2012, 03:49 PM
stunning colourway parcy,  love all your chrome bikes except the TA,  you need to get rid of that tat....      :coolsmiley:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 03:51 PM
stunning colourway parcy,  love all your chrome bikes except the TA,  you need to get rid of that tat....      :coolsmiley:
keep dreaming Sam,the t.a will be last out of the door :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Macmania on September 26, 2012, 03:51 PM
Blimey Mark..........that is one nice looking build  :smitten:

As you say, does have similarities to the GT (which is no bad thing).

Looks great with the 82 Long and what a score with the bars  :4_17_5: AWESOME !

I miss building bikes like this  :(
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Devilock on September 26, 2012, 03:54 PM

probably Rich,come and ave a go if you think youre hard enough!!! :2funny:

 :2funny:  :LolLolLolLol:

(http://i1085.photobucket.com/albums/j436/mothwasp73/bikefight.jpg)
Title: Re: PATTERSON PR200 PRO all done!!
Post by: CustardLips on September 26, 2012, 04:10 PM
That's a beauty that is !  :smitten:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: bobbbbsy on September 26, 2012, 04:11 PM
very nice yo !
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 04:11 PM
Blimey Mark..........that is one nice looking build  :smitten:

As you say, does have similarities to the GT (which is no bad thing).

Looks great with the 82 Long and what a score with the bars  :4_17_5: AWESOME !

I miss building bikes like this  :(
i miss you building bikes like this too Nath :'(
Title: Re: PATTERSON PR200 PRO all done!!
Post by: brass monkey! on September 26, 2012, 04:12 PM
Thats a stunner mate  :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: martin46 on September 26, 2012, 05:03 PM
OOOOOOOOSSH love it  :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Julian347 on September 26, 2012, 05:10 PM
What a stunner  :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: southern andy on September 26, 2012, 05:10 PM
Giz a go mush.


Oh and loose the wheel nuts  :buck2:




US made Patty bars  :4_17_5: :4_17_5: :4_17_5: :4_17_5:  wish i had a set  :yahoo_silent:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 05:12 PM
Giz a go mush.


Oh and loose the wheel nuts  :buck2:




US made Patty bars  :4_17_5: :4_17_5: :4_17_5: :4_17_5:  wish i had a set  :yahoo_silent:
but wouldnt the wheels fall off :-\ :2funny:
i know they are shoite Andy but they came with the wheels,i might chuck them on the robbo
Title: Re: PATTERSON PR200 PRO all done!!
Post by: rollin72 on September 26, 2012, 05:33 PM
thats a cracking build Mark, they look mint together..nice1 :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Jt on September 26, 2012, 05:43 PM
lovely
Title: Re: PATTERSON PR200 PRO all done!!
Post by: rooski on September 26, 2012, 05:44 PM
Fookin lush Mark,love Pattersons,got the right bars too :smitten:

But.............Oakley grips :knuppel2:



























 :D
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 05:46 PM
Fookin lush Mark,love Pattersons,got the right bars too :smitten:

But.............Oakley grips :knuppel2:



























 :D

i know,sorry Andy, i just coudnt bring myself to put the ames on,i was waiting for a rollicking from you :2funny:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: rooski on September 26, 2012, 05:49 PM
Fookin lush Mark,love Pattersons,got the right bars too :smitten:

But.............Oakley grips :knuppel2:



























 :D

i know,sorry Andy, i just coudnt bring myself to put the ames on,i was waiting for a rollicking from you :2funny:

 :LolLolLolLol:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Retrodan72 on September 26, 2012, 05:51 PM
Lovely that Mark, saw the van @ MK too, post a pic for those that didn't, great stuff. :coolsmiley: :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: southern andy on September 26, 2012, 05:57 PM
Lovely that Mark, saw the van @ MK too, post a pic for those that didn't, great stuff. :coolsmiley: :daumenhoch:

No Don't, it looks gay but then i suppose it would with him driving it.



Just found these under my stairs Mark  :angel:  Didn't realise they were that common, may have to get rid now.

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1968.jpg)

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1967.jpg)

Title: Re: PATTERSON PR200 PRO all done!!
Post by: animal on September 26, 2012, 05:58 PM
 :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: hunterdubber on September 26, 2012, 06:00 PM
SPANKING!!!  :smitten: :smitten: :smitten:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: monkian on September 26, 2012, 06:00 PM
Awesome stuff Mark. Stunning build 8) :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Retrodan72 on September 26, 2012, 06:17 PM
Ah, there's the van, didb't show first time I read the thread. :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 06:21 PM
Ah, there's the van, didb't show first time I read the thread. :daumenhoch:
thats cos i just added it on your request Dan :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Badbaldie on September 26, 2012, 06:25 PM
got to love a Patty  :smitten: :smitten:  and having 2  :shocked: and the bars as well  :shocked: thats just showing off  ..... and why not  :LolLolLolLol: 2 stunning builds there Marky p  :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Retrodan72 on September 26, 2012, 07:22 PM
Ah, there's the van, didb't show first time I read the thread. :daumenhoch:
thats cos i just added it on your request Dan :daumenhoch:

Dur, i'm a clutz today  :idiot2:, cheers Marko.  :coolsmiley:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: NORTY40 on September 26, 2012, 07:48 PM
I know your into the Patty's mate and the Van is cool.  Times are hard for everyone at the mo but building two old bikes in the same sickly colours for your two YTS trainee plasterers to get to jobs on is not on imo  :(  How the hell will they carry a 6 x 4 board on them ???  ::)


Stunning build Mark   ;) :4_17_5:

 :coolsmiley:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Darren KAP on September 26, 2012, 07:53 PM

   Stunning builds there Mark , now there both finished you can spend more time on the sun bed  :LolLolLolLol: :LolLolLolLol: 

    :4_17_5:  Top builds mate  :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on September 26, 2012, 07:56 PM

   Stunning builds there Mark , now there both finished you can spend more time on the sun bed  :LolLolLolLol: :LolLolLolLol: 

    :4_17_5:  Top builds mate  :daumenhoch:

spray tan booth Darren,get it right ffs!! ;D
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Darren KAP on September 26, 2012, 08:20 PM


     :LolLolLolLol: :LolLolLolLol:   
Title: Re: PATTERSON PR200 PRO all done!!
Post by: rad_pitt on September 26, 2012, 09:07 PM
Always look forward to your builds Mark - absolutely stunning as per mate  :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: bigfatolly on September 26, 2012, 10:08 PM
Love a MarkyP build always look so clean and with the right looking parts too :4_17_5:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Spartacus on September 27, 2012, 06:48 PM
Mark, this Patty is an absolutely brilliant build mate ! I didn't expect anything else than a super structured assembly if I may be honest.  :daumenhoch:
Mind boggling partlist and thumbs up you kept the original chrome on those Patty tubes !!
Apart from this I'm very proud there's one of those gold Epochs on it that came from me !  :coolsmiley:

For the stickering on your van : I was so surprised when I saw the pic, I had the same idea to something like that on my van one day.
What a shock Mark !!

Congrats on this one mate !!
Title: Re: PATTERSON PR200 PRO all done!!
Post by: gossa on September 29, 2012, 08:41 PM
Quality builds there fella, who doesn't love a Patty but yes, Ame's, it's the law.....
Title: Re: PATTERSON PR200 PRO all done!!
Post by: (((sonic))) on October 03, 2012, 12:12 AM
Simply stunning Mark, top notch bud, I tip my hat.

B
Title: Re: PATTERSON PR200 PRO all done!!
Post by: neil on October 05, 2012, 01:11 PM
That's a proper patty build Mark  :4_17_5: ame's though not oakleys  :LolLolLolLol:
As ever awesome build  :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: dordymush on October 05, 2012, 01:24 PM
missed this build.must have been while i was on my hols.
cracking build mark.
i got oakleys on mine at the minute to till i find a sensible pair of unitrons  :crazy2:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: rooski on October 05, 2012, 01:37 PM
missed this build.must have been while i was on my hols.
cracking build mark.
i got oakleys on mine at the minute to till i find a sensible pair of unitrons  :crazy2:
These are the ones i put on mine,ideal :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/pp160/andyrooski/pads/IMAG0161.jpg)

Title: Re: PATTERSON PR200 PRO all done!!
Post by: Purebmx on December 19, 2012, 08:50 PM
Where did you get that padset?

Paul
Title: Re: PATTERSON PR200 PRO all done!!
Post by: double chevron on December 19, 2012, 08:54 PM
How did I miss that one?
perfect in every way  :smitten: :smitten:

and the van isn't bad neither haha
Title: Re: PATTERSON PR200 PRO all done!!
Post by: DR VINOAH on December 19, 2012, 09:32 PM
That's A1 stunner

That OG chrome was well worth saving & concidering the Hank & Frank decal even more so



Title: Re: PATTERSON PR200 PRO all done!!
Post by: BADDH on December 19, 2012, 11:20 PM
Top build Mark.  Again.  :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: Kaner on December 19, 2012, 11:23 PM
Sexy builds Mark. Real nice.
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on December 20, 2012, 06:18 PM
Where did you get that padset?

Paul
you need to speak to 'firebird'  (steve) .send him a pm ,he will make you a set :daumenhoch:
Title: Re: PATTERSON PR200 PRO all done!!
Post by: markyp on December 20, 2012, 06:19 PM
i do love an old thread especially when its mine!!!thanks for the comments guys :daumenhoch:
SimplePortal 2.3.5 © 2008-2012, SimplePortal