RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: poolysheriff on October 05, 2012, 05:35 PM

Title: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 05:35 PM: (http://www.radbmx.co.uk/archive/albums/i99/poolysheriff/002-18.jpg)

Right
what have i got :LolLolLolLol:
Its got a TT of 19 1/2"
Serial number is on the BB and its TT2141
Been used by me very little
Cant sell it if i dont know what it is :-\
Title: Re: Hutch frame n forks
Post by: AKGOFF on October 05, 2012, 05:42 PM: Pro Racer I believe.
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 05:50 PM: It came with those white decals on
But i might have renewed a few of them that were marked
Think the main frame one is still original

dont want to sell it as one thing if its another :D
Dont want to rob anyone
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 07:24 PM: are the weep holes in the rear triangle drilled or punched, and how many are there Gaz?
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 07:33 PM: Quote from: HUTCHMAN on October 05, 2012, 07:24 PM
are the weep holes in the rear triangle drilled or punched, and how many are there Gaz?

1 in each side
hard to tell if they are drilled or punched :-\
possibly punched
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 07:41 PM: can you do us a pic of the brake bridge?
Title: Re: Hutch frame n forks
Post by: glenboy on October 05, 2012, 07:43 PM: could it be a pro raider maybe
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 07:45 PM: I,ve got a pro raider as well and the serial number is M4-G0104 on that :-\
Title: Re: Hutch frame n forks
Post by: brummie on October 05, 2012, 07:49 PM: overseas pro racer :-\
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 07:50 PM: the pro raider make total sense...has this other one got any other serial numbers on the inside of the LH drop out?
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 07:53 PM: Think i,ll just sell it as a burner :LolLolLolLol:

I,ll go and have another look Dave :D

Whats the cheapest Hutch it could be ,and i,ll list it as that :daumenhoch:
Title: Re: Hutch frame n forks
Post by: glenboy on October 05, 2012, 07:59 PM: are they stamped on the bb if its taiwan made and on the dropout if usa made
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 08:29 PM: Quote from: poolysheriff on October 05, 2012, 07:53 PM
Think i,ll just sell it as a burner :LolLolLolLol:

I,ll go and have another look Dave :D

Whats the cheapest Hutch it could be ,and i,ll list it as that :daumenhoch:

ok...£20 then? >:D
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 08:49 PM: (http://www.radbmx.co.uk/archive/albums/i99/poolysheriff/007-24.jpg)
(http://www.radbmx.co.uk/archive/albums/i99/poolysheriff/008-21.jpg)
(http://www.radbmx.co.uk/archive/albums/i99/poolysheriff/009-3.jpg)

My pro raider has more weep holes in the rear chain stays than this one
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 08:59 PM: Says on the Hutch website that the pro raider has a toptube of 18 1/4"

Is this right :-\

And it says the pro racer is 19 1/2"

CAnt find any serial number info though :(
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 08:59 PM: that looks U.S !!
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 09:03 PM: I was just going to say is it Taiwan pro racer :LolLolLolLol:
Title: Re: Hutch frame n forks
Post by: glenboy on October 05, 2012, 09:06 PM: :LolLolLolLol: the plot thickens (http://www.zionmarshall.org/images/columbo.gif)
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 05, 2012, 09:11 PM: Taiwan pro raider :daumenhoch:

But its 19 1/2" TT

Just had another look and it could be owt :idiot2:

Money is on Taiwan Pro Racer
Title: Re: Hutch frame n forks
Post by: glenboy on October 05, 2012, 09:24 PM: i'm thinking tai hutch pro racer , the tubing on the racer is slightly narrower on the racer 1 inch versus 1 and 1/8th inch for the raiders top tube, give it a measure gaz but tai pro racer for my money

tai hutch pro racer

Serial number on the BB, , 19 1/2" TT length, 1" TT O.D., 1 3/8" DT O.D.,

pro raider


Serial number on the BB (as for I know starting with M4-…), , 18 1/2" TT length, 1 1/8" TT O.D., 1 1/4 DT O.D. Made in Taiwan.
Title: Re: Hutch frame n forks
Post by: glenboy on October 05, 2012, 09:31 PM: ah right got it now looking at the info above the pro racer has a noticably bigger downtube than its top tube whereas the raider the downtube is virtually the same size as the top tube , accordingly most pro raiders are in the 19 inch top tube size even though the spec is 18.5 so measuring the top tube and down tube ids the definitive answer :daumenhoch: , i've learnt something new today ;D
Title: Re: Hutch frame n forks
Post by: Darren KAP on October 05, 2012, 09:38 PM: Sell it to me Gaz and i'll spray it Day-glow orange and fit discs :LolLolLolLol: :LolLolLolLol:
Title: Re: Hutch frame n forks
Post by: HUTCHMAN on October 05, 2012, 10:08 PM: what is the down tube dia?
Title: Re: Hutch frame n forks
Post by: Twesnik on October 06, 2012, 12:59 AM: Hmmmm......
Another Disc Hutch?
One = more then enough!
:LolLolLolLol:
Title: Re: Hutch frame n forks
Post by: poolysheriff on October 06, 2012, 12:15 PM: I,ve checked and my pro raider has a TT of 18 1/2"
And the holes are punched on that ,
And drilled on the other one , pro racer

So anyone know who much is a decent price lmk ;)