RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: BENDYCAT ELEVENTEEN on November 12, 2012, 02:18 PM
-
This thread is to show what tools you use on your bike and what works best ;)
It can be shop bought or home made tool or part that helps you !
You can say where you got it from and a link or how you made it
Show tools that you have and have found work the best on restoring a bmx or bike - some times we use the wrong tool for the right job, but end up fooking the parts up or get stuck
please put up a nice clean picture and what the tool does ;)
in this thread you can show stuff like : best chain remover - what you use to knock or press BB cups in - pedal spanners - axle spanners -skyway alloy hub puller - any thing else that works for you
Sometimes cheap tools can work and sometimes cheap doesn't always work well
I hope this thread will help anybody that is having trouble with a part that they need to remove
cheers B ;)
(if this thread works well can a MOD please move it to the sticky section, once enough members have posted - please)
-
Show us your TOOL?
Wait till Diggler gets a load of this thread.... crikey... :10_2_12:
-
Cant wait to see Adam's workshop tools.
-
had trouble getting the gungy stuff left by the headtube decal on my Hawk F20 f/f, so it was time for my trusty decal remover :daumenhoch:
(http://image.shutterstock.com/display_pic_with_logo/4498/4498,1173008596,7/stock-photo-metal-grinder-with-sparks-2802716.jpg)
-
Cant wait to see Adam's workshop tools.
He won't be posting in this thread. He'll be getting Steve to do it.
-
suggested a similar idea a bit back , fell upon deaf ears back then :( , maybe you got more clout with the mods B :daumenhoch: ,and have better luck tis a good idea threads keep popping up on how do get this part off, or on , be a good ref for people new to building , plus could include some of the home made tools that work , the wheel jig that did the rounds is a great example :daumenhoch:
http://www.radbmx.co.uk/forum/index.php'topic=123488.0
-
well thank you oldtired mate - yup shame we couldn't get a decent thread about tools and not just tools repleying ::) ;D
see how it goes and maybe it could be cleaned up after ;)
-
:LolLolLolLol: its a thread on Rad with the word Tool in the title did you expect owt else when posting it :LolLolLolLol: see i've just done the same :2funny: :2funny:
-
easy and handy tool for when building wheels.
(http://www.radbmx.co.uk/archive/albums/n203/john4130/spokekey.jpg)
-
easy and handy tool for when building wheels.
(http://www.radbmx.co.uk/archive/albums/n203/john4130/spokekey.jpg)
:daumenhoch: Saves a lot of p1ssing around does that.
-
How does it work ?
-
lace up the wheel with just a couple of turns on the nipples, once laced stick the tool in from the top of the nipples and tighten till it bottoms out. go round the whole wheel doing this. this ensures all the nipples have the same amount of turns. then it,s just a case of tensioning the wheel. i,ve used this loads and the wheel needs very little truing afterwards.
-
well thank you oldtired mate - yup shame we couldn't get a decent thread about tools and not just tools repleying ::) ;D
see how it goes and maybe it could be cleaned up after ;)
sorry, grinders are a tool for men, will one of these do ya
(http://s7v1.scene7.com/is/image/JohnLewis/230954559?$fash_product$)
ideal for getting chalk the right consistency for preventing freshly applied puncture patches from sticking to the inside of your tyres :daumenhoch: :LolLolLolLol:
-
had trouble getting the gungy stuff left by the headtube decal on my Hawk F20 f/f, so it was time for my trusty decal remover :daumenhoch:
(http://image.shutterstock.com/display_pic_with_logo/4498/4498,1173008596,7/stock-photo-metal-grinder-with-sparks-2802716.jpg)
x2 thats my tool right there :4_17_5:
-
suggested a similar idea a bit back , fell upon deaf ears back then :( , maybe you got more clout with the mods B :daumenhoch: ,and have better luck tis a good idea threads keep popping up on how do get this part off, or on , be a good ref for people new to building , plus could include some of the home made tools that work , the wheel jig that did the rounds is a great example :daumenhoch:
http://www.radbmx.co.uk/forum/index.php'topic=123488.0
Why would you have to have any clout with the moderators for people to reply to a thread? Yours fell on deaf ears, it happens.
-
Cant wait to see Adam's workshop tools.
He won't be posting in this thread. He'll be getting Steve to do it.
Cheeky fookwits. ;D
Best tool in the business, does everything but is a bit old and smelly.
(http://www.radbmx.co.uk/archive/albums/zz341/akgoff/006-10.jpg)
Here's another tool that I used to put a chain on my sons bike once, it didn't work very well though, I found I had to give it a whack to make it work properly.
(http://www.radbmx.co.uk/archive/albums/zz341/akgoff/108.jpg)
Adam
-
suggested a similar idea a bit back , fell upon deaf ears back then :( , maybe you got more clout with the mods B :daumenhoch: ,and have better luck tis a good idea threads keep popping up on how do get this part off, or on , be a good ref for people new to building , plus could include some of the home made tools that work , the wheel jig that did the rounds is a great example :daumenhoch:
http://www.radbmx.co.uk/forum/index.php'topic=123488.0
Why would you have to have any clout with the moderators for people to reply to a thread? Yours fell on deaf ears, it happens.
I'll give yer your £5 later ;) ;)
-
suggested a similar idea a bit back , fell upon deaf ears back then :( , maybe you got more clout with the mods B :daumenhoch: ,and have better luck tis a good idea threads keep popping up on how do get this part off, or on , be a good ref for people new to building , plus could include some of the home made tools that work , the wheel jig that did the rounds is a great example :daumenhoch:
http://www.radbmx.co.uk/forum/index.php'topic=123488.0
Why would you have to have any clout with the moderators for people to reply to a thread? Yours fell on deaf ears, it happens.
I'll give yer your £5 later ;) ;)
Paypal gift please :LolLolLolLol:
-
suggested a similar idea a bit back , fell upon deaf ears back then :( , maybe you got more clout with the mods B :daumenhoch: ,and have better luck tis a good idea threads keep popping up on how do get this part off, or on , be a good ref for people new to building , plus could include some of the home made tools that work , the wheel jig that did the rounds is a great example :daumenhoch:
http://www.radbmx.co.uk/forum/index.php'topic=123488.0
Why would you have to have any clout with the moderators for people to reply to a thread? Yours fell on deaf ears, it happens.
Yes i understand that, perhaps the post was badly worded on my part , i was merely suggesting that the idea for the thread being made a sticky maybe given more consideration by the admin team due to Bendy being a longer standing member of the forum .It was not my intention to suggest , as it would seem this has been interpreted, that some people have more influence with the admin team than others.
-
stidds answer please and you get another fiver :daumenhoch:
;D
well this thread is fooked up before it had a chance to start ::)
-
:LolLolLolLol: yeah sorry B :-[
-
will start a new one and see if anyone to behave :bondage: ;D
-
dont make me act the fool !
(http://www.radbmx.co.uk/archive/albums/oo34/robby187/Rifle_AK-47.jpg)
-
if in doubt give it a clout!
(http://www.radbmx.co.uk/archive/albums/1003/escrs/012ham.jpg)
and the good old trusty adjusty!!
(http://www.radbmx.co.uk/archive/albums/1003/escrs/Semi-Polish-Electroplating-Twin-Color-Immersing-Plastic-Adjustable-Spanner-HAP013-.jpg)
-
stidds answer please and you get another fiver :daumenhoch:
;D
well this thread is fooked up before it had a chance to start ::)
I can answer that very simply, this thread isn't a sticky and isn't being considered for its stickiness :P either.
Send me that £5 please Bendy :LolLolLolLol:
-
This is a multi tool.. Binned it! It was shit :daumenhoch:
(http://i1038.photobucket.com/albums/a469/Poochy_06/IMG_0638.jpg)
-
Somalian love egg?
-
;D yup threads dead :10_2_12:
-
;D yup threads dead :10_2_12:
Yay, we killed another one :LolLolLolLol: :2gunsfiring_v1:
-
:knuppel2: