RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: adenough on November 21, 2012, 01:04 PM
-
ive tried paint stipper, blow torch, caustic soda $ sulphic acid. ive some how managed to get a layer of what seems to be plastic coating, but underneath it still wont budge, im chuckin rattles all over the place....HELP :2gunsfiring_v1: :2gunsfiring_v1:
-
gasket remover :daumenhoch:
-
http://www.radbmx.co.uk/forum/index.php'topic=54500.0
in the sticky section :LolLolLolLol:
-
gasket remover, interesting, thanks :daumenhoch: :daumenhoch: ive removed powder with nitromoors in the past, but under the plastic layer, it does seem to be like a glued on rubber substance, like a gasket :daumenhoch:
-
Not all gasket removers will work, I know Permatex will but you may have to experiment.
-
cheers :daumenhoch:
-
my local shop has in stock somethin called 'GET YOUR GASKET OFF' says its strong and in a spray, does anyone think its worth a go? :daumenhoch:
-
i always use a heat gun and a sharp blade to get any real hard powder off.
takes ages but it comes off.
-
I must be a loon then :D I have used Oxy/actelene before :uglystupid2: have also used a wire wheel on a drill or grinder . But make sure u use goggles cos the wire is foookin dangerous if it ends up in ur eyes :'(
-
:tickedoff:
http://compare.ebay.co.uk/like/360509520579?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0
-
:tickedoff:
http://compare.ebay.co.uk/like/360509520579?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0
No fooker is listening Dan no matter how many times you put the information up.
Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. >:(
-
carb cleaner- halfrauds ! :daumenhoch:
-
:tickedoff:
http://compare.ebay.co.uk/like/360509520579?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0
RADs Deja Vu question ;D
Dan's right of course :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/i63/209ed/BMX/P1040819.jpg)
(http://www.radbmx.co.uk/archive/albums/i63/209ed/BMX/P1040814.jpg)
(http://www.radbmx.co.uk/archive/albums/i63/209ed/BMX/P1040816.jpg)
-
:tickedoff:
http://compare.ebay.co.uk/like/360509520579?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0
No fooker is listening Dan no matter how many times you put the information up.
Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. >:(
i honestly give up, i probs strip 2 to 300 frames a year but wtf do i know :LolLolLolLol:
-
Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. >:(
:LolLolLolLol:
Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you! ;D
-
:tickedoff:
http://compare.ebay.co.uk/like/360509520579?var=lv<yp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0
No fooker is listening Dan no matter how many times you put the information up.
Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. >:(
i honestly give up, i probs strip 2 to 300 frames a year but wtf do i know :LolLolLolLol:
Q. What the hell will get powder off?
A. Dan
:daumenhoch:
-
i thought you had to loose the chrome to pc .. can you just go over the top ? :buck2:
-
Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. >:(
:LolLolLolLol:
Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you! ;D
I have stopped bothering these days Rich, makes me laugh though when somebody asks the spoke length question, gets rubbish advice from people and then 2 weeks later up pops a thread asking why the spokes they have bought are too long.
-
its why i ll send my next wheels to you boys ! :daumenhoch:
-
ooo a spoke tangent , :LolLolLolLol: & cheers Dan !!
-
Reminds me of 'which brake pads do i use on tuffs question! :daumenhoch:
-
i heard romblokes breath will have it back to bare metal in less than six sentences.....
-
What's a looptail ?
:crazy2: