RADBMX.CO.UK

Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2012 => Topic started by: pickle on December 14, 2012, 07:37 PM

Title: December BOTM VOTE off
Post by: pickle on December 14, 2012, 07:37 PM
Fill ya boots  :daumenhoch:
Title: Re: December BOTM entry thread
Post by: stevesredvxr on December 14, 2012, 08:23 PM
Hi Guys, well I'll kick it off this month with my newly finished Skyway Streetbeat.
Based on the Skyway Advert from BITD.

Most parts are NOS and took a very long time to find. It's cost me a small fortune to build.

Parts list as follows:

Skyway Streetbeat Frame and Forks Grey and Baby Blue Two Tone
Skyway EZ 2 Bars Baby Blue
Skyway Stem Baby Blue and Grey
Skyway Hot Seat in Baby Blue
Skyway Mid 80's Coaster Tuffs in Baby Blue
Skyway Spinmaster
Skyway Powerdisc Baby Blue
Skyway Freestyle Brake Blocks Baby Blue
Tracer 43t Chainring Grey
Tioga Comp Ramp Tyres 20 x 1.75
SR Tubular OPC
AME Bubble Font Grips Grey
Dia Compe Tech 5's Baby Blue and Grey
Odyssey Calipers Baby Blue and Grey
Odyssey Seat Clamp
Cro-Mo Seat Post
Shimano PD MX Pedals in Baby Blue.

Thanks and hope you like
Regards Steve.

(http://www.radbmx.co.uk/archive/albums/cc63/stevesredvxr/f0e4f768d4dbd4ddda2e49befb766551.jpg)

(http://www.radbmx.co.uk/archive/albums/cc63/stevesredvxr/30bf2b179dfa2d221dd0cc1a03679406.jpg)

(http://www.radbmx.co.uk/archive/albums/cc63/stevesredvxr/7c8ff8fb61ae15a3d4fab05086836837.jpg)

(http://www.radbmx.co.uk/archive/albums/cc63/stevesredvxr/274f362ecf1928445f1b11de5083b344.jpg)
Title: Re: December BOTM entry thread
Post by: martin46 on December 14, 2012, 11:12 PM
1982 MK1 Burner in original survivor condition. Been hiding in an attic for 25+ years

After a bit of spit and polish its almost as good as new  :daumenhoch:

(http://www.radbmx.co.uk/archive/albums/n47/martin46/Photo0022.jpg)

(http://www.radbmx.co.uk/archive/albums/n47/martin46/Photo0023.jpg)

(http://www.radbmx.co.uk/archive/albums/n47/martin46/Photo0021.jpg)
Title: Re: December BOTM entry thread
Post by: midschooljon on December 15, 2012, 10:45 AM
Last one for a while as all my bikes are going into storage next week... 1994 Ramp Room Big Daddy.

Spec is as follows:
Frame: 94 Hoffman Big Daddy in Nickel colour
Fork: 94 Hoffman Big Daddy Forks in Chrome
Bars: Hoffman Low Drag
Headset: Tioga
Stem: TNT inverted
Gyro: Odyssey Gyro II
Levers: Dia Compe Tech 77
Front Brake: Dia Compe 883
Rear Brake: Dia Compe AD990
Girps: ODI Longneck
Seat Clamp: Hutch
Seat Post: Chrome Strait
Seat: Primo Steroid Saddle
Cranks: GT 3 piece
Sprocket: Graveyard 43T
Pedals: GT DX Style
Chain: Chrome Izumi
Wheels: Peregrine Super Pro's
Tyres: NOS primo V Monsters (Not Repop's)
Pegs: Standard Bykes Grenades

(http://www.sirmerlin.com/wp-content/uploads/2012/12/94_hoffman_big_daddy_right_side_front.jpg)

(http://www.sirmerlin.com/wp-content/uploads/2012/12/94_hoffman_big_daddy_tnt_stem_lowdrag_bars.jpg)

(http://www.sirmerlin.com/wp-content/uploads/2012/12/94_hoffman_big_daddy_primo_steroid_seat.jpg)

(http://www.sirmerlin.com/wp-content/uploads/2012/12/94_hoffman_big_daddy_right_rear_detail.jpg)
Title: Re: December BOTM entry thread
Post by: mattbloke on December 15, 2012, 10:53 AM
Finished this just in time for the London ride, saved from a sorry looking second hand shop  :daumenhoch:
All work carried out by myself.
spec:
Frame   : '84 Rickman Freestyler with foot standers. raw finish with clear lacquer. Del's Decals
Forks    : '84 Rickman Freestyler with foot standers. OG chrome
Bars      : '84 Rickman Freestyle bars. raw finish with clear lacquer.
Grips     : AME
Stem     :  Redline fork lifter (suntour stamped, repainted)
H/set     :  Gold Epoch self adjusting
Brakes   : '85 Dia Compe 901/880 with tech 5 levers
Crank    : 180mm Takagi OPC with Tuf neck power disc/Ammaco 46t chain wheel
Chain    :KMC gold
Wheels :Araya 7X with mallard loose ball hubs, 16t dicta freewheel. Duro white wall tyres
Seat     : Re-pop Dominator/Re-pop MX clamp, Renthal lay-back post  



(http://www.radbmx.co.uk/archive/albums/ab321/mattbloke7r/IMAG1550_zps5c8d7768.jpg)
(http://www.radbmx.co.uk/archive/albums/ab321/mattbloke7r/IMAG1867.jpg)
(http://www.radbmx.co.uk/archive/albums/ab321/mattbloke7r/IMAG1904.jpg)
(http://www.radbmx.co.uk/archive/albums/ab321/mattbloke7r/IMAG1905.jpg)
Title: Re: December BOTM entry thread
Post by: bobafett on December 16, 2012, 09:54 PM

1979 mongoose

1979 mongoose frame
Ashtabula forks
Motomag II wheels with coaster
Cheng Shin C183 Fat/Thin
mongoose gold stem (original finish and decal)
mongoose bars
winner's circle clear octapus grips
mongoose headset
mongoose seat clamp
mongoose snowflake chainring
mongoose stamped rat traps
Ashtabula crank
mongoose SS seat post
mongoose badged messinger saddle

Pictures aren't the best.... bit of a dull frosty day  :(

(http://www.jpdeane.com/BMX/mybikes/1979RedWithMotomags/1979redmotomag_bobafett01.jpg)

(http://www.jpdeane.com/BMX/mybikes/1979RedWithMotomags/1979redmotomag_bobafett03.jpg)

(http://www.jpdeane.com/BMX/mybikes/1979RedWithMotomags/1979redmotomag_bobafett09.jpg)

(http://www.jpdeane.com/BMX/mybikes/1979RedWithMotomags/1979redmotomag_bobafett10.jpg)


 :)
Title: Re: December BOTM entry thread
Post by: oldschoolace on December 16, 2012, 10:17 PM
Bugger it, i will bung this in as it turned out better than i expected and it can keep Bobafett's lovely goose company in the old 'n gold corner  :)


1980 Batavus Deluxe
Custom decals
Custom X bars
Custom Skyway Ace rims with customised Suzue hubs ;)
Finished in Nissan intense blue metallic paint with plasticote brilliant metallic gold accents
Dura ace cranks
45t takagi chainring
KKt pedals
SR 420 stem
japanese messenger seat
Weinmann brakes
Copy skyway brake pads
Mx foam grips
Dc mx seatclamp
Landar fluted seatpost
Gold kmc chain



(http://i1182.photobucket.com/albums/x455/oldschoolace/2012-12-16102058.jpg)


(http://i1182.photobucket.com/albums/x455/oldschoolace/2012-12-16101907.jpg)


(http://i1182.photobucket.com/albums/x455/oldschoolace/2012-12-16102209.jpg)


(http://i1182.photobucket.com/albums/x455/oldschoolace/2012-12-16101947.jpg)
Title: Re: December BOTM entry thread
Post by: Spartacus on December 22, 2012, 12:09 AM
I'll stick this in to make the numbers up this month: Full restored 1985 Vector Mark II third gen.

http://www.radbmx.co.uk/forum/index.php'topic=155568.msg1540296#msg1540296

(http://www.radbmx.co.uk/archive/albums/yy128/spartacus-css/Vector%20mark%20II/IMGP4522.jpg)
(http://www.radbmx.co.uk/archive/albums/yy128/spartacus-css/Vector%20mark%20II/IMGP4537.jpg)
(http://www.radbmx.co.uk/archive/albums/yy128/spartacus-css/Vector%20mark%20II/IMGP4480.jpg)
(http://www.radbmx.co.uk/archive/albums/yy128/spartacus-css/Vector%20mark%20II/IMGP4445.jpg)

Frame: Vector Mark 2 frame
Forks:  Vector Mark 2 forks
Handlebars: Vector pro 8 inchers
Headset: Chrome Epoch Mori
Padset: Repro Vector padset
Grips: Ame Unitrons
Stem: Built in bars
Seatpost: Some chrome seatpost
Seat: Black Kashimax Aero seat
Seatclamp: Dia Compe MX hinged  
Crank: Redline Full Wrap 180 mm Flight cranks
Chainring:  44T Sugino
Chaindisc: Tuf Neck
Pedals: KKT Lightning
Chain: Izumi black/silver
Rearbrake: Dia Compe Mx 1000
Brakelever: Dia Compe MX Tech III red
Brake cable: Terrycable
Brakeblocks: Skyway pro/finns
Rims:  Araya 7x rims with Sunshine hubs
Tyres: Irc  20 x 1.75 & 20 x 2.125

Title: Re: December BOTM entry thread
Post by: trickydeno on December 23, 2012, 09:55 PM
I'll put one of mine in this festive month I think  :)

1984 redline rl 20 prostyler not factory spec but all era correct. this was my dream spec wrote on the back of action bike December 84.....I had a super burner with black z's at the time   :)

Og Redline rl 20 prostyler frame & forks
Og chrome redline 400 flights
Restored Skyway alloy hubbed tuff 2 wheels & nos panaracer freestyle tyres
Nos Sugino chainring & chainring bolts with Izumi chain
Restored Suntour xc ii pedals
Restored Redline brute stem with nos hatta headset & suntour lock nut
Repaired & refinished Redline sta bars & og ame unitrons
Nos Redline cr-mo post, suntour clamp & kashi aero seat
Nos 84 stamped dc mx 1000's tech 3 levers dc cables & skyway pro pads


(http://www.radbmx.co.uk/archive/albums/af75/trickydeno/image-2_zpsf056a717.jpg)
(http://www.radbmx.co.uk/archive/albums/af75/trickydeno/image-2_zpsf7e61dd9.jpg)
(http://www.radbmx.co.uk/archive/albums/af75/trickydeno/image-2_zpsf1df00ae.jpg)
(http://www.radbmx.co.uk/archive/albums/af75/trickydeno/image.jpg)
Title: Re: December BOTM entry thread
Post by: Spen69 on December 26, 2012, 09:33 PM
Knight race RetroGoose - one of only 10 made. Got one of each now and love these things :daumenhoch:

21.25" TT, Euro BB, proper geometry :smitten:
Odyssey Director forks & integral headset
Prolite Stealth hubs laces to Sun Big City Lite rims driven by an Oddy 13T freewheel and shod with Rainbows
Redline single pinchers with custom made powerdisc and 35T chainring
GT Expert bars with a fantastic ControlTech stem
Eclat Unify saddle combo
Other shit I've forgotten :2funny:

(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_7149.jpg)
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_7148.jpg)
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_7156.jpg)
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_7154.jpg)
Title: Re: December BOTM entry thread
Post by: Andy68 on December 28, 2012, 06:06 PM
Sod it, here's the festive '83 Jag!!!

Survivor build.
Bought as a complete survivor, replaced a few parts this month to up to expert size but most of the original have simply been cleaned up/polished and bolted back on.
Frameset 17 1/2'' Toptube, New Decals (Thanks Dan)
Chrome Ukai 20x1 3/8 rims, GT hubs, Suntour 16T freewheel, Green/yellow label Comp 3s.
165 TA crank & BB, 40T Pro Neck chainwheel, Cycle Pro pedals, Izumi chain.
DK stem, GT expert bars, A'me Tri's.
Dia Compe 720 caliper, Shimano lever, Clarkes Powerglide cable.
Troxel Comet combo seat, Tange seatpost clamp.
Haro Tech plate (should really peel off the Araya decal!!)
Repop Flite frame & bar pad, Hutchins stem pad...........................   :daumenhoch:
As most of you know I love a bargain and finding cheap parts. A tight arse Northerner!!! The whole project cost less than £300!!!!  :LolLolLolLol:

(http://www.radbmx.co.uk/archive/albums/ii49/Paz68/DSCF5046.jpg)

(http://www.radbmx.co.uk/archive/albums/ii49/Paz68/DSCF5068.jpg)

(http://www.radbmx.co.uk/archive/albums/ii49/Paz68/DSCF5051.jpg)

(http://www.radbmx.co.uk/archive/albums/ii49/Paz68/DSCF5070.jpg)
Title: Re: December BOTM entry thread
Post by: BossHogg on December 31, 2012, 11:02 AM
1983 CW ZX Pro

Factory Spec...... :)

NOS CW ZX Pro F/f
NOS CW Pro Bars
NOS CW Seatpost
Pro-Neck stem
NOS Ame Tri
Tange MX-3 headset
NOS Araya 7x rims
NOS Suzue hubs
NOS Cheng Shin tyres
NOS Shimano brake
NOS Shimano brake lever
NOS Shimao brake cable
NOS KKT Lightning pedals
NOS Takagi 175mm cranks
NOS Tange b/b
NOS Pete's Precision chainwheel 44t
NOS Takagi Spider
Suntour 16th freewheel
NOS TBS chain 1/8
NOS Kashimax Aero seat
NOS Tange seatpost clamp
NOS CW safety pads

(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSCN0052_zpsc522d44d.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSCN0057_zps1663f900.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSCN0061_zpsceb4c45b.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/CWZXProBMXActionMarch83_zps543fe44c.jpg)
Title: Re: December BOTM entry thread
Post by: Devilock on December 31, 2012, 04:03 PM
1980 Kuwahara KZ-1



OG condition KZ-1 F+F
NOS Redline Proline Pro size bars
NOS Uni plate
NOS OGK grips
NOS Suntour MS1000 stem
NOS Tange MX2
NOS DC rear brake set-up (890/Pre Bent/cable)
NOS seat post
NOS Suntour MC1000 seat post clamp
NOS Elina LB
Takagi crank & ring
NOS KKT Lightning pedals
Suntour freewheel
Shimano hubs
Araya 7C rims
NOS Asahi spokes
NOS Comp III tyres


(http://i1085.photobucket.com/albums/j436/mothwasp73/006-2.jpg)

(http://i1085.photobucket.com/albums/j436/mothwasp73/003-4.jpg)

(http://i1085.photobucket.com/albums/j436/mothwasp73/011.jpg)

(http://i1085.photobucket.com/albums/j436/mothwasp73/014-2.jpg)
SimplePortal 2.3.5 © 2008-2012, SimplePortal