RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: kjilaja on January 01, 2013, 02:49 PM

Title: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: kjilaja on January 01, 2013, 02:49 PM

Afternoon all,I need to get the quick release out of my front mx1000 so I can convert to Potts mod,it's riveted in,how do I remove?
Also I bought a sharp bottom boot but seem to be having trouble getting it on any of my frames,do they do different sizes in them or are they just one size?any tips on how to get it on,thanks in advance :daumenhoch:

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: Jaypeg on January 01, 2013, 02:52 PM

Have you tried warming up your bb boot (Hot water)?

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: kjilaja on January 01, 2013, 03:12 PM

Cheers j,worked a treat :daumenhoch:
Just need to get the quick release out now ;)

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: HARORIDER on January 01, 2013, 03:21 PM

just drill out the quick release mate start small and work your way up  :daumenhoch:

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: GavinDavis on January 01, 2013, 05:10 PM

Ive got an MX1000 that I was thinking of doing too, I think the drill is the only option  ;)

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: john4130 on January 01, 2013, 05:25 PM

just leave the quick release on, put an adjuster through the hole and you can still use the quick release.

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: GavinDavis on January 01, 2013, 05:40 PM

Quote from: john4130 on January 01, 2013, 05:25 PM

just leave the quick release on, put an adjuster through the hole and you can still use the quick release.

How do you mean John?  You got any pics as im trying to work it out in my head  ???

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: john4130 on January 02, 2013, 03:24 PM

like this.
(http://www.radbmx.co.uk/archive/albums/n203/john4130/diacompeadjuster_zpsa0573852.jpg)

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: GavinDavis on January 02, 2013, 05:34 PM

Aha!!!  Good stuff John  :daumenhoch: ....I think i was having a bit of a blonde moment at the time  ;D

Title: Re: Removing quick release from mx1000,tips for fitting sharp bottom boot
Post by: SteveG on January 02, 2013, 06:17 PM

It was a long time ago that I did mine but I carefully filed the top of the rivit down until it came off.
I re-fitted the micro adjust where the quick release was and fitted a standard cable clamp to the top.

That was back in the 80's and MX 1000'S didn't cost as much as they do now. If you can make it work OK leave the quick relaese on.