RADBMX.CO.UK
BMX General => BMX Chat => Topic started by: THIRSTYKIRSTY on January 07, 2013, 06:04 PM
-
YUPP GOT A PROB WITH BEARINGS ON ME MTB BOTTOM BRACKET
SO GOT THE NUMBER OFF THE RUBBER SEALS,,,,6804 2RS
LOOKED ON EBAY AND HEY HO LOADS POP UP AT A REASONABLE PRICE,,,,,
PROBLEM IS THAT BEARING NUMBER EQUATES TO 20X32X7
AND MY BEARINGS ARE 19MM,,,,,
ANY BODY GOT ANY IDEAS AS IM NOT KEEN ON SPENDIN 35 QUID ON A NEW FULL BB
RUSS
-
What crank set and bb you got in there?
-
FSA GAMMA DRIVE
MEGA EXO BB 4000
-
FSA GAMMA DRIVE
MEGA EXO BB 4000
Seems reading a bit about that BB here:
http://www.bikeradar.com/forums/viewtopic.php?f=40004&t=12881185
That although it is a 19mm the bearings are actually 20mm, so you should be good to go buying the 20mm 6804 2RS from eBay :)
-
hey up,,,,ta for the response mate
thing is i have some old 6804 bearings and the slop about on the spindle where as the bearings on my bike are a snug fit
good reading though ,,ta dannywhac
-
Most bearings on ebay like 6804rs and 6904rs are actually 20mm which is too big for a 19mm axle. You might need to shop around for the proper ones.
Having said that I know sweet FA about MTB stuff, so if it's different to BMX kit just ignore me :uglystupid2:
-
Knock the od ones out and take them to a local bearing centre, every town has one!
They will sort you out with the right ones.
Might be a couple of quid more, but easier than sending back and arguing the toss over postage etc.
MM
-
just buy one of these for £12 posted :daumenhoch:
http://www.chainreactioncycles.com/Models.aspx'modelID=34674
-
24mm though rob
-
what is? the FSA Mega EXO crank are compatible with the Shimano BB from what i read ???
-
THATS A DEORE BB ROB AND HAVE 22/24 SPINDLE