RADBMX.CO.UK

Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: Munnyella on February 27, 2013, 06:49 PM

Title: Pitch fork 1 1/8
Post by: Munnyella on February 27, 2013, 06:49 PM

Hi

Anyone got a compression bolt that'll fit a 1/18 set of pitchforks, they've  got a welded bit in, not a star nut.

Its quite big, I have a big sized one that has a cable hole in, but this is bigger.

No point putting this in the wanted section....

Cheers

MM

Title: Re: Pitch fork 1 1/8
Post by: HEYWOOD BMX on February 27, 2013, 10:29 PM

 You can buy S&M ones seperately or use the bolt from a freestyle starnut set.
http://www.sourcebmx.com/product/forks/sm-fork-top-cap/13266.shtml

http://www.sourcebmx.com/product/forks/dia-compe-ahead-cap-star-nut-set/15288.shtml

 I prob have a spare Diatech bolt and topcap if you can wait until I can look tomorrow?

Title: Re: Pitch fork 1 1/8
Post by: Munnyella on February 28, 2013, 01:24 PM

Quote from: VOIVOD on February 27, 2013, 10:29 PM

You can buy S&M ones seperately or use the bolt from a freestyle starnut set.
http://www.sourcebmx.com/product/forks/sm-fork-top-cap/13266.shtml

http://www.sourcebmx.com/product/forks/dia-compe-ahead-cap-star-nut-set/15288.shtml

 I prob have a spare Diatech bolt and topcap if you can wait until I can look tomorrow?

I've got a freestyle one from a GT or Mongoose with a welded starnut, but the s&m one is bigger!

MM

Title: Re: Pitch fork 1 1/8
Post by: HEYWOOD BMX on February 28, 2013, 03:22 PM

 Mine should fit-I have one here fitted to a set of older Pitchforks.There is not a standard size for all compression bolts,PM me and I can post it to you FOC.

Title: Re: Pitch fork 1 1/8
Post by: kev-s on February 28, 2013, 05:32 PM

is there not a local nut and bolt shop near you that u can take the forks to and get them to try a few bolts out?

thats what i had to do with my pitchforks on my red holmes, unfortunately i cant remember the thread and pitch size  :tickedoff: :tickedoff: