RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: pmk on April 02, 2013, 07:47 PM

Title: pedal size
Post by: pmk on April 02, 2013, 07:47 PM

i have a sigino one peice crank on my skyway ta , got new pedals for it but the spndle threads are too fat for the hole , the pedals i got were 1/2 inch ......... what is the correct pedal size for an 80's sugino crank ?

Title: Re: pedal size
Post by: HUTCHMAN on April 02, 2013, 07:51 PM

set of 9/16 ths in a 1/2 " box?

Title: Re: pedal size
Post by: pmk on April 02, 2013, 07:55 PM

yes the threaded part is big , wont fit in the crank , so do i need 1/2inch ones

Title: Re: pedal size
Post by: BENDYCAT ELEVENTEEN on April 02, 2013, 08:04 PM

yup - sounds like you have 9/16" (three piece cranks) and you need 1/2" one piece crank  ;)

Title: Re: pedal size
Post by: GavinDavis on April 02, 2013, 08:06 PM

Yep agreed, you must have a set of 9/16's there......1/2" is what you need  :daumenhoch:

Title: Re: pedal size
Post by: BMX1973 on April 06, 2013, 01:29 PM

..........agreed on all of the above.  :)

Title: Re: pedal size
Post by: BENDYCAT ELEVENTEEN on April 06, 2013, 01:37 PM

agreed on the above that agreed with what I said and agreed with what I have said again with agreeing with the above agreed people agreeing with me - glad we got that agreed  :daumenhoch:

Title: Re: pedal size
Post by: CustardLips on April 07, 2013, 07:22 PM

All those in favour say I.  :)