RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: THIRSTYKIRSTY on April 19, 2013, 09:41 PM

Title: dirtbike ad mounts
Post by: THIRSTYKIRSTY on April 19, 2013, 09:41 PM
been tryin to sell for a while now with no joy

so gonna remove AD mounts and powder frame

wats best way to remove them with least damage

(http://www.radbmx.co.uk/archive/albums/h56/spikeybonce/007-47_zps7e31e080.jpg)
Title: Re: dirtbike ad mounts
Post by: dordymush on April 19, 2013, 09:45 PM
you'll ruin it  :'(
Title: Re: dirtbike ad mounts
Post by: dan-dare on April 19, 2013, 09:48 PM
Dynamite, meep meep.....
Title: Re: dirtbike ad mounts
Post by: bof on April 19, 2013, 09:54 PM
Ask diggler :-)
Title: Re: dirtbike ad mounts
Post by: bof on April 19, 2013, 09:58 PM
Cut off most of the metal with a hacksaw, and then grind down the rest gently with one of these. Never done one myself but heard this is the best way .
http://www.amazon.co.uk/dp/B000T9QZME/'tag=hydra0b-21&hvadid=9556632549&ref=asc_df_B000T9QZME
Title: Re: dirtbike ad mounts
Post by: Munnyella on April 20, 2013, 06:28 PM
Exactly what Bof said, done it on loads of forks, take your time, dead easy.

MM
Title: Re: dirtbike ad mounts
Post by: GavinDavis on April 20, 2013, 07:10 PM
Don't so it Russ!   :(
Title: Re: dirtbike ad mounts
Post by: Dark Diggler on April 20, 2013, 07:47 PM
Cut off most of the metal with a hacksaw, and then grind down the rest gently with one of these. Never done one myself but heard this is the best way .

..my sides need stitching up :2funny:
SimplePortal 2.3.5 © 2008-2012, SimplePortal