RADBMX.CO.UK

BMX General => BMX Chat => Topic started by: pkripster on August 05, 2013, 01:12 AM

Title: profile crank removal/ powerlite profiles same i guess later type
Post by: pkripster on August 05, 2013, 01:12 AM

im using profile removal tool the bolt seems hard to turn anyone had experience with these lmk its the big bolt tool wiv spacer

Title: Re: profile crank removal/ powerlite profiles same i guess later type
Post by: Dannywhac on August 05, 2013, 09:04 AM

If you're removing the cranks you don't use the spacer on the removal tool, just screw in the centre threaded bit and welly the end to knock the arms off the axle.

You only use the spacer part if you're putting the cranks on.

Title: Re: profile crank removal/ powerlite profiles same i guess later type
Post by: PK.RIPPER on August 13, 2013, 04:08 PM

I just hit the arms off with a rubber mallet, but always put a little bit of engine oil on the axle splines before putting the arm back on so next time it's a piece of cake.