RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Kaner on September 13, 2013, 06:04 PM
-
Gents
I need some stepped washers for my Haro FST forks.
Does anyone know where I can get them from?
I tried the ones out of my graphite skyways but they were too big.
Help!
Here is the problem:
(http://i247.photobucket.com/albums/gg145/KanerBurner/8BFEF003-3229-49C9-ACCD-7CA834EA03C3-1914-000001FFDF1DAB2D_zpsa08a1132.jpg)
-
need some of these
http://www.ebay.co.uk/itm/10-to-14mm-BMX-Hubs-Axle-Converters-Pair-Converts-10mm-to-14mm-/261178290339?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item3ccf7070a3
-
Ordered!
I didn't think these would work as the Skyway ones don't fit, I will give it a go though.
-
need some of these
http://www.ebay.co.uk/itm/10-to-14mm-BMX-Hubs-Axle-Converters-Pair-Converts-10mm-to-14mm-/261178290339?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item3ccf7070a3
That's not what you need, unless someone's vandalised your forks - those are for running 10 mm axles in 14 mm dropouts
-
Damn Ben, I sold a set of the proper Haro dropout washers a while back now but can't remember who to :-[
I don't have any pic left of them either so you know what they look like, sorry mate.
You need Haro dropout savers :daumenhoch:
-
Oh fook a duck.
-
Damn Ben, I sold a set of the proper Haro dropout washers a while back now but can't remember who to :-[
I don't have any pic left of them either so you know what they look like, sorry mate.
You need Haro dropout savers :daumenhoch:
Are they the things you found in my shed?! Or were they GT ones??? :-\
-
think its called a
Pyramid front hub, wheel retaining washer, ?
have found em for sale in the states and in Australia , seem to be hens teeth in the uk ? one of them bits that gets lost in the bottom of the tool box :LolLolLolLol:
doubt any bmx shops will have em , probs best trying road bike shops , or even moped shops
here's the Ausi one would have thought they would bung a few in the post :daumenhoch: bottom left :daumenhoch:
http://www.bicyclepartswholesale.com.au/contents/en-us/d65.html
used my last ones as stem bolt spacers
-
Are they the things you found in my shed?! Or were they GT ones??? :-\
No mate. The ones I had actually came with the Haro when I bought it many moons ago now :)
You don't think at the time but I should have had a few sets made up :-\
I guess GT ones or SE ones might work though ???
-
sorry fella my eyesights a shocker thought your skyway ones were too deep not too wide. if their no good to ya drop me a pm and i'll chuck 7 quid your way cant say fairer than that :daumenhoch:
-
Aren't they the same as the SE ones?
I hope so as I saved the ones off my old Haro to go on my Ripper
-
Aren't they the same as the SE ones?
I hope so as I saved the ones off my old Haro to go on my Ripper
That's what Andy H said. But they are all in America on eBay. . . Unless Alan's has them??? I will check later.
-
I have some tange one's if any good to you ..
send me your address and I will stick then in the post to you f.o.c.
:)
-
What a top man. Anything that will fit would be great. PM'ing.
-
Aren't they the same as the SE ones?
I hope so as I saved the ones off my old Haro to go on my Ripper
That's what Andy H said. But they are all in America on eBay. . . Unless Alan's has them??? I will check later.
Biaggio used to have them
But then I've not looked on his site for about 3 years
-
Won't these fit?
It does say for other forks too, I bought some for my natty cruiser forks & they fitted spot on.
http://bit.ly/14V0gjX
-
yup they do ,
nearly a tenner a pair though :uglystupid2: , there's never a mini lathe around when you need one, sure there's a market for these with the shiny boys :chin: :LolLolLolLol:
-
yup they do ,
nearly a tenner a pair though :uglystupid2: , there's never a mini lathe around when you need one, sure there's a market for these with the shiny boys :chin: :LolLolLolLol:
Yeah I know what you mean, when these arrived though I gotta admit I was just over the moon knowing the dropouts were protected / supported so a tenner I was totally ok with.
-
aren't these what you need half way down the page
http://www.vert-ego.com/main.htm
-
aren't these what you need half way down the page
http://www.vert-ego.com/main.htm
Vertigo won't let you link to sub category sections so if that's what you meant to do which one were you looking at?
If you did mean to link to the bmx home page as you have, then I can only see flex fighters about halfway down, for stems not axles ?
-
in the wheel accessories section :daumenhoch:
-
in the wheel accessories section :daumenhoch:
as this :daumenhoch:
i've flipping sent this link to someone else, i wondered why they didn't know what i was on about ;D
-
:LolLolLolLol: do that all the time , mate says "what the fook do i want a big slipper for ya twunt" :LolLolLolLol:
surprised to see that Biagonad has something for sale at a reasonable price :LolLolLolLol:
-
£5 posted now after this thread £15 posted :daumenhoch:
-
They will probably go up when you add them to the cart, everything magically goes up on that site when added to the cart. :Aresehole:
-
Ben, i might have some that will do the job. I will have a look later and let you know mate :daumenhoch:
-
Ben, i might have some that will do the job. I will have a look later and let you know mate :daumenhoch:
Thanks for the offer Rob but I should be sorted now. Tommy (breakdancer) kindly offered me a set.
The 14<10mm definitely don't fit.