RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: spadey99 on October 19, 2013, 09:11 PM
-
Ok guys so I got some Pro Class 2 rims in alloy and some SR sealed low flange hubs off Pro Class 3 hard anno wheels and wondered if anyone knew what spoke size I needed??? I know there is a calculator spoke thing on here( thanks Bendy :daumenhoch:) but I cant work it out....
Want to get these built so any help is appreciated guys...... :daumenhoch:
-
:popcorn:
-
194mm I think for low flange hubs on 7x?
-
194mm I think for low flange hubs on 7x?
yes for a 4 cross pattern
-
Pro Class are same as 7X rims then??? thanks....... :daumenhoch:
-
Pro Class are same as 7X rims then??? thanks....... :daumenhoch:
People make pro class rims by drilling 7x rims!
-
Yes but don't take my measurements as right, as that swan guy says "for 4 cross", depends on how your going to lace your wheel, I'm guessing your talking about using 36 spokes? I've got a Hozen spoke thread cutter, so I can use any size spoke, I just cut them to size and thread them to suit. Try and get your head around the spoke length guide, there's a few on the net to use..!
-
yes mate 36 spokes..... :crazy2:
-
As a general guide, it's 192 - 194mm low flange to 7X and 184mm High Flange to 7X
This is simple to use buddy. Sean spent a whole day laying this out for people to use :D and he gets upset when people don't use it as he could have been doing sod all :daumenhoch:
http://www.radbmx.co.uk/forum/index.php/topic,136816.0.html
-
http://www.radbmx.co.uk/forum/index.php/topic,136816.0.html
X2 - nowt more simple. £5 set of digi calipers from eBay and you'll never need to ask the question again :daumenhoch:
-
:daumenhoch: