RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Gizmo on October 25, 2013, 02:20 PM
-
What size spokes would i need for zrims
To sr large flange hubs ?
Are the zrims same as 7x etc
What have you used
Thanksi advance ;)
-
http://www.radbmx.co.uk/forum/index.php/topic,136816.0.html
-
I am not going to comment about the spoke size simply because Danny has put up the link to how to measure your own.
However, Z-rims take a shorter spoke than 7X as they have a raised section in the middle of the rim where the spoke sits.
-
all my zedds have 194s in :daumenhoch:
-
all my zedds have 194s in :daumenhoch:
But do you have SMALL FLANGE Chris?
-
all my zedds have 194s in :daumenhoch:
Exactly the kind of comment on spoke sizes that doesn't help.
There are too many variables with spoke sizes, Suzue hubs for example have 3 sizes of flange, high, low and mid flange so each one has a different size spoke. Every manufacturer makes their hubs differently, flange sizes are different, spoke hole to spoke hole is different etc etc etc.
What is the lacing pattern radial/3x/4x/racelace etc? Each one means a different size spoke.
Just learn how to measure and calculate them yourself and then you don't spend £25 on a set of spokes that are the wrong size.
-
:popcorn:
-
Didn't mean to sound harsh, but I had 2 messages again this week from members that took others advice on spoke sizes, spent hard earned £££ on those spokes and found when lacing the wheels up the spokes are the wrong size.
It takes 5 minutes to measure the hubs and rims using the free guide on site, which will save mega ££ in the future.
Money is tight for us all these days and throwing lots at spokes that are potentially the wrong size just seems silly.
-
Exactly the kind of comment on spoke sizes that doesn't help.
There are too many variables with spoke sizes, Suzue hubs for example have 3 sizes of flange, high, low and mid flange so each one has a different size spoke. Every manufacturer makes their hubs differently, flange sizes are different, spoke hole to spoke hole is different etc etc etc.
What is the lacing pattern radial/3x/4x/racelace etc? Each one means a different size spoke.
Just learn how to measure and calculate them yourself and then you don't spend £25 on a set of spokes that are the wrong size.
(http://i1078.photobucket.com/albums/w495/Freestylerider/thidH-27_zpsef211f92.jpg) (http://s1078.photobucket.com/user/Freestylerider/media/thidH-27_zpsef211f92.jpg.html)
-
Didn't mean to sound harsh, but I had 2 messages again this week from members that took others advice on spoke sizes, spent hard earned £££ on those spokes and found when lacing the wheels up the spokes are the wrong size.
It takes 5 minutes to measure the hubs and rims using the free guide on site, which will save mega ££ in the future.
Money is tight for us all these days and throwing lots at spokes that are potentially the wrong size just seems silly.
poor sean i wonder if you get another message/thread about spoke sizes you will snap :LolLolLolLol:
i always use your how to guide +never had a prob when lacing the wheel up -easy when you know how to do it
-
(http://i1078.photobucket.com/albums/w495/Freestylerider/Pix%20and%20Flix/sPOKES_zps2a3e302d.jpg) (http://s1078.photobucket.com/user/Freestylerider/media/Pix%20and%20Flix/sPOKES_zps2a3e302d.jpg.html)
-
:LolLolLolLol:
Sean mate, I fel your pain :uglystupid2:
Always used your guide and it always worked :daumenhoch:
-
Does this apply to skyway mags too ?
Whats the length of spoke on these .
I only need 10 spokes
Is there a difference with metal hub or plastic ?
where can i get nos skyway mag spokes :LolLolLolLol:
-
Does this apply to skyway mags too ?
Whats the length of spoke on these .
I only need 10 spokes
Is there a difference with metal hub or plastic ?
where can i get nos skyway mag spokes :LolLolLolLol:
Skyways are easy only 10 spokes to lace and you don't even need to true them, just lace them up and throw the wheels in the freezer the will true themselves over night :LolLolLolLol:
-
small flange have 194s in and im led to believe large flange need 182s if your doing a four cross lace up me tinks
-
small flange have 194s in and im led to believe large flange need 182s if your doing a four cross lace up me tinks
:whistle: :whistle: :-X
-
small flange have 194s in and im led to believe large flange need 182s if your doing a four cross lace up me tinks
:whistle: :whistle: :-X
:popcorn:
-
small flange have 194s in and im led to believe large flange need 182s if your doing a four cross lace up me tinks
:whistle: :whistle: :-X
:popcorn:
Nothing to see here Sir, move along please :LolLolLolLol:
Fook me though I don't half fancy some popcorn now. :LolLolLolLol: