RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: gib66 on December 14, 2013, 08:29 AM
-
can anyone tell me the rim erd of oddysey t1000 20 inch rim please
they are 20x1.5
-
Measure em coach
-
i kind of have but dont trust it lol i have just used tape measure and dont hanve spare spokes to use .i was trying to get the spokes ordered and drop em off at bradford tuesday for flip or nicky to drop to you for building simone .but dont wanna get em wrong
WL, width from center to left flange 34.0 2 165.8 165.8
WR, width from center to right flange 34.0 3 174.7 174.7
dL, left flange diameter 61.5 4 185.0 185.0
dR, right flange diameter 61.5 3.00 174.7 174.7
S, spoke hole diameter 2.6
X, cross number (decimal allowed)(optional) 3.00
WL_effective = W + OSB 34.0
WR_effective = W - OSB 34.0
Rear Wheel Input Data Output Data
N, total number of spokes 36 cross left length right length
ERD, effective rim diameter 372.0 0 156.3 156.3
OSB, offset spoke bed 0.0 1 158.5 158.5
WL, width from center to left flange 27.0 2 164.6 164.6
WR, width from center to right flange 27.0 3 173.5 173.5
dL, left flange diameter 61.5 4 183.9 183.9
dR, right flange diameter 61.5 3.00 173.5 173.5
S, spoke hole diameter 2.6
X, cross number (decimal allowed)(optional) 3.00
WL_effective = W - OSB 27.0
WR_effective = W + OSB 27.0
which makes 174 or 184 spokes pending 3 or 4 cross .
-
look in the tech +resto section stidds pud a full guide up for mesuring rims hubs etc-used it loads ,never got the spoke length wrong + always built the wheels myself with no probs
-
look in the tech +resto section stidds pud a full guide up for mesuring rims hubs etc-used it loads ,never got the spoke length wrong + always built the wheels myself with no probs
x2 It's a piece of piss. ;)