RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: childhooddream on January 27, 2014, 09:41 PM
-
Ok guys need some help...
I've just picked up a mitygoose on here and in 2 minds on the wheels.
I would like if the 16inch steels are.not that bad once they been cleaned to get drilled and built up as some copy pro class.
Has anyone attempted drilling a set?
I unfortunately don't have the equipment to do it so seeing if I posted to someone they would do the measuring/drilling etc for me?
If not Will be black tuffs instead
-
it's simple to do, just make sure you measure inbetween each spoke hole seperately as they usually differ a bit. i did it on my ammaco. i think the hole size i used was 9mm
(http://farm9.staticflickr.com/8029/7987938596_3a2ac2ffb6_o.jpg)
-
Here's peter j's how to.
http://www.radbmx.co.uk/forum/index.php/topic,132399.msg1275884.html#msg1275884
-
Awesome thanks guys think I'm gonna borrow some kit and give it a go.. :)
-
Great wok there :daumenhoch:
it's simple to do, just make sure you measure inbetween each spoke hole seperately as they usually differ a bit. i did it on my ammaco. i think the hole size i used was 9mm
(http://farm9.staticflickr.com/8029/7987938596_3a2ac2ffb6_o.jpg)