RADBMX.CO.UK

Old School BMX 1980 - 1988 => Old School Race (riders ready, pedals ready... GO!!) => Topic started by: Retrodan72 on February 08, 2014, 12:42 PM

Title: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on February 08, 2014, 12:42 PM
This came up for sale early in January. Tom (Rad Pitt) was moving it on after buying it and never finding the time to get on with it.

It's one from my wish list, but was down the list, but I kept going back to Tom's sale thread, and sent him a pm. I'd met Tom a couple of years back and knew he was a good guy, so a deal was done, thanks Tom.

(http://img.tapatalk.com/d/14/02/08/yqasu7yg.jpg)

So with a knackered boiler, and being so soon after Christmas I had to tread carefully laying out cash on parts, but I shifted my Performer and had a bit of spare cash to obtain a few bits.

As you all who know me, it's never going to be Ukai Speedlines and Redline Flights, but going down the repop road may annoy some of you, but it suits my wallet, and frees up the high end stuff for you guys.

I wanted to keep it clean and simple, so aimed for gold and yellow to go with the chrome. I'd seen Carl's GT Pro a couple of years ago, and liked the look, so for these.

(http://img.tapatalk.com/d/14/02/08/udatygud.jpg)

So we have some:

repop A'me's from eBay
Hsin Lung Foo Yung bars off Gaz (Rollin')
Suntour Powerstem off Chris (Jaan)
Repop DC clamp from Alan's
Tange MX2 headset from Moonster
gold nips
Sealed bearing Suzues off Dave (Brummie)
Valve caps off ScottyB
Shimano pedals off Jai
Sugino 44t chain ring off eBay
and
some 7x stylee rims from Aussie land that arrived today.

I'll be getting the rest of the bits with some help from Rooski over the next few months, then this will be out in Chester in April.


Sent while strangling Kojak from my iPhone
Title: Re: 1983 Patterson PR200 Build
Post by: factory pilot on February 08, 2014, 05:17 PM
It's funny Dan me and Andy (Mr DTTDB  :LolLolLolLol: )  were only talking about this frame today and how we both would love to do a Patty in the future ;)
Looks like it going be a sweet build when it's done mate :smitten:
Can't wait to see it finished :daumenhoch:

I was thinking of adding a bit of red too and having A'me Unitrons if I could afford it....
Yellow and gold is going to look good though :coolsmiley:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 05:20 PM
It's funny Dan me and Andy (Mr DTTDB  :LolLolLolLol: )  were only talking about this frame today and how we both would love to do a Patty in the future ;)
Looks like it going be a sweet build when it's done mate :smitten:
Can't wait to see it finished :daumenhoch:

Cheers Ant, I don't really know much about Patty's, only that every time I've seen one, I always like the look of them. :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: factory pilot on February 08, 2014, 05:22 PM
I don't know much but I love the graphics and chrome/yellow/gold looks killer dude :4_17_5:
Title: Re: 1983 Patterson PR200 Build
Post by: southern andy on February 08, 2014, 05:25 PM
You need these

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1968.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1968.jpg.html)

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1967.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1967.jpg.html)


You're not having them though.  :LolLolLolLol: US made Patty Pro bars.  :coolsmiley:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 05:26 PM
You need these

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1968.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1968.jpg.html)

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1967.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1967.jpg.html)


You're not having them though.  :LolLolLolLol: US made Patty Pro bars.  :coolsmiley:

I bet they're worth more than the total I'll spend on the parts for mine Andy.  :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Funkyworm on February 08, 2014, 05:27 PM
You need these

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1968.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1968.jpg.html)

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1967.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1967.jpg.html)


You're not having them though.  :LolLolLolLol: US made Patty Pro bars.  :coolsmiley:

Harsh.....  :shocked:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 05:30 PM
You need these

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1968.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1968.jpg.html)

(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/SAM_1967.jpg) (http://s128.photobucket.com/user/carpcrazyox/media/SAM_1967.jpg.html)


You're not having them though.  :LolLolLolLol: US made Patty Pro bars.  :coolsmiley:

Harsh.....  :shocked:

But fair.  ;)
Title: Re: 1983 Patterson PR200 Build
Post by: southern andy on February 08, 2014, 05:35 PM
 :)

I never paid a lot for them Dan. They're on my Profile Champ Pro now.

You cant go wrong with gold in your build on that frameset.  :4_17_5:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 05:43 PM
:)

I never paid a lot for them Dan. They're on my Profile Champ Pro now.

You cant go wrong with gold in your build on that frameset.  :4_17_5:

I've never done a gold build before Andy, I think it will look good, time will tell.  :-\
Title: Re: 1983 Patterson PR200 Build
Post by: 20to26 on February 08, 2014, 06:58 PM
Looking good Dan!
Title: Re: 1983 Patterson PR200 Build
Post by: brettypeeps on February 08, 2014, 08:02 PM
Looking forward to seeing this to develop Dan. Looking good so far


Sent from my iPhone using Tapatalk
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 08:04 PM
Cheers lads.  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: rooski on February 08, 2014, 08:08 PM
Should look well smart  :daumenhoch:

Tried blue n yellow on mine,couldn't get the grips to match the seat,pity cos i bought the seat about 2 years before the f+f, cos i knew i wanted to build a Patterson  :D

Now i can't use the yellow n blue unitrons  :(

Redone now black n chrome/silver looks well smart  8)
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 08:19 PM
Should look well smart  :daumenhoch:

Tried blue n yellow on mine,couldn't get the grips to match the seat,pity cos i bought the seat about 2 years before the f+f, cos i knew i wanted to build a Patterson  :D

Now i can't use the yellow n blue unitrons  :(

Redone now black n chrome/silver looks well smart  8)

Look forward to seeing that Andy. :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: rooski on February 08, 2014, 08:26 PM
Should look well smart  :daumenhoch:

Tried blue n yellow on mine,couldn't get the grips to match the seat,pity cos i bought the seat about 2 years before the f+f, cos i knew i wanted to build a Patterson  :D

Now i can't use the yellow n blue unitrons  :(

Redone now black n chrome/silver looks well smart  8)

Look forward to seeing that Andy. :daumenhoch:

Will be coming down to MK  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Gnarlyscoots on February 08, 2014, 09:00 PM
Looking good Dan. The gold hubs on those silver rims will look very smart and clean.

Good choice of components so far  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: That Swan Guy on February 08, 2014, 09:14 PM
Dan

Stop procrastinating and build the bloody thing! :LolLolLolLol:











It's gonna look ace :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 08, 2014, 09:15 PM
Looking good Dan. The gold hubs on those silver rims will look very smart and clean.

Good choice of components so far  :daumenhoch:

Cheers Terry, the rest of the parts will be:

Gold Tech 3
Gold DC caliper??
Yellow Kashi Aero
Sugino spider
Sugino or Takagi 1 piece
1.75 Comp III's
Yellow cable
Tange BB
and a repro padset.

I prefer building the race bikes now, I've done the Freestylers and race bikes just seem easier to get the parts together, no arsein about trying to get the right colours etc.
Title: Re: 1983 Patterson PR200 Build
Post by: Mikku on February 08, 2014, 11:01 PM
Have always fancied a Patty!  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: dancetothedrummersbeat on February 09, 2014, 11:13 PM
It's funny Dan me and Andy (Mr DTTDB  :LolLolLolLol: )  were only talking about this frame today and how we both would love to do a Patty in the future ;)
Looks like it going be a sweet build when it's done mate :smitten:
Can't wait to see it finished :daumenhoch:

I was thinking of adding a bit of red too and having A'me Unitrons if I could afford it....
Yellow and gold is going to look good though :coolsmiley:

Well said Ant! Yes, strange that we were talking about this very bike yesterday. Like I've said before Dan, I was looking at the for sale thread and hovering over the dib dobs button on this. Really nice bike - lovely colour combo with the decals. Yellow and gold parts always look great on these. Can't wait to see this at Chester. Keep us all updated - more pics please!
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 09, 2014, 11:29 PM
Will do, as and when, may get the wheels built next weekend. :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: NORTY40 on February 09, 2014, 11:37 PM
Should be a cool rider Dan , really looking forward to seeing it built up  8)


.... then we can christen it at Chester with some posh clunge on the seat  >:D
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 09, 2014, 11:53 PM
Should be a cool rider Dan , really looking forward to seeing it built up  8)


.... then we can christen it at Chester with some posh clunge on the seat  >:D

Fingers crossed Joffy, I'll be sniffing the seat afterwards if so.  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: NORTY40 on February 10, 2014, 12:13 AM
Should be a cool rider Dan , really looking forward to seeing it built up  8)


.... then we can christen it at Chester with some posh clunge on the seat  >:D

Fingers crossed Joffy, I'll be sniffing the seat afterwards if so.  :daumenhoch:



..... you do surprise me Dan  ;D
Title: Re: 1983 Patterson PR200 Build
Post by: In2bmx on February 11, 2014, 12:09 PM
That's gonna look awesome Dan  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Jaan on February 15, 2014, 12:00 PM
Do we have an update on this yet Danny boy?
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on February 15, 2014, 12:03 PM
Do we have an update on this yet Danny boy?

Not yet Chris, will be a couple of weeks yet as I only allow myself a monthly BMX fund, and I've smashed that already this month.  :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Andy68 on March 01, 2014, 08:15 PM
I've just scrolled thro 2 pages expecting the fookin thing built Dan not 20 pics of the bars!!!! Wot ya doin???!!!!!!!!!!!!!   :LolLolLolLol:

Title: Re: 1983 Patterson PR200 Build
Post by: Andy68 on March 01, 2014, 08:18 PM
....... and I'm still no wiser as to why no one uses the 'Race Bike' category anymore?? Why is it such a tiny size heading?? Just askin......  ???
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 01, 2014, 08:28 PM
I've just scrolled thro 2 pages expecting the fookin thing built Dan not 20 pics of the bars!!!! Wot ya doin???!!!!!!!!!!!!!   :LolLolLolLol:

Ordered more bits yesterday, and some bits came this week. I'm in no rush, not riding till Chester. :daumenhoch:

Oh, and I've not got the frame and forks yet.  :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Andy68 on March 01, 2014, 08:31 PM
 :LolLolLolLol: 
Title: Re: 1983 Patterson PR200 Build
Post by: rad_pitt on March 04, 2014, 08:56 PM
Just spotted the thread Dan, will be winging its way to you shortly  ;)
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 04, 2014, 09:03 PM
Just spotted the thread Dan, will be winging its way to you shortly  ;)

Thanks Tom, no rush though whatsoever mate.  :4_17_5:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 08, 2014, 12:00 PM
A few more bits gathered this week. Seat, freewheel, pad set, tubes and chain.

(http://img.tapatalk.com/d/14/03/08/yjypyqa6.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: 1983 Patterson PR200 Build
Post by: Devilock on March 19, 2014, 05:28 PM
Have you finished this blasphemous build?
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 19, 2014, 05:47 PM
Have you finished this blasphemous build?

Unfortunately not Rich, I've not got the frame and forks yet.  :LolLolLolLol:

It will be done by the end of the month though.  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 22, 2014, 04:27 PM
Bit of an update today. As you've seen in the other thread, I started on Thursday night to polish my spokes. I finished the last few off this morning, then along with the rims, hubs and nips, I dropped them off at my LBS to get built. I told them I was in no rush, but really wanted them for the Chester ride in 3 weeks.

So, the bike shop sent me a text 45 mins ago saying that they were ready , so I bombed down there to collect them.

(http://img.tapatalk.com/d/14/03/23/yqa4eqy4.jpg)
(http://img.tapatalk.com/d/14/03/23/tazu5aje.jpg)
(http://img.tapatalk.com/d/14/03/23/jypurude.jpg)
(http://img.tapatalk.com/d/14/03/23/zahuta9u.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: 1983 Patterson PR200 Build
Post by: Mikku on March 23, 2014, 08:49 AM
Sweet-looking wheelset that Dan! Looking forward to seeing this finished!  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: In2bmx on March 23, 2014, 11:24 AM
Nice wheels Dan , I can't wait to see this finished  .  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 23, 2014, 11:28 AM
Nice wheels Dan , I can't wait to see this finished  .  :daumenhoch:

Nice cheap and cheerful wheel set Carlos, £140 inc building.

I'll learn to build my own one day.  :)










Nah, I won't, that's a lie.  ::)
Title: Re: 1983 Patterson PR200 Build
Post by: That Swan Guy on March 23, 2014, 11:36 AM
Nice wheels Dan , I can't wait to see this finished  .  :daumenhoch:

Nice cheap and cheerful wheel set Carlos, £140 inc building.

I'll learn to build my own one day.  :)










Nah, I won't, that's a lie.  ::)

It's theraputic building wheels Dan, give it a go.






Oh hang on, no it's not  "help"
Title: Re: 1983 Patterson PR200 Build
Post by: BMX1973 on March 23, 2014, 12:41 PM
 8)
Title: Re: 1983 Patterson PR200 Build
Post by: rad_pitt on March 27, 2014, 06:47 PM
The bits look great, wheels especially - not long now mate  ;)
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 27, 2014, 06:51 PM
The bits look great, wheels especially - not long now mate  ;)

I can't wait Tom, I won't sleep tonight.  :D
Title: Re: 1983 Patterson PR200 Build
Post by: steve69 on March 28, 2014, 06:30 AM
Mum, are we there yet ??


The suspense is killing me.
Title: Re: 1983 Patterson PR200 Build
Post by: TORKER mick on March 28, 2014, 06:45 AM
Mum, are we there yet ??


The suspense is killing me.
DAN get on with it  :tickedoff: :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 28, 2014, 06:53 AM
I'm sorry lads, I'll be getting this built up this weekend.  :-[

I'm sitting at home today waiting for a box with the frame and forks in to be delivered.  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 28, 2014, 05:23 PM
Sorry build fans, but I'll have to leave you in suspenders a little bit longer with this.

I was hoping the UPS guy would turn up before my local Royal Mail depot closed at 12.30 as my seat guts and tyres are there, but I wasn't taking the risk on missing the frame and forks getting delivered, so stayed at home all day. The driver showed up at 16.00

(http://img.tapatalk.com/d/14/03/29/u9e8ysub.jpg)

So I couldn't wait to get the frame set out

(http://img.tapatalk.com/d/14/03/29/mu7agudu.jpg)
(http://img.tapatalk.com/d/14/03/29/de4y7une.jpg)

It really is a beaut, I just need to get a duster and a bit of Autosol out tomorrow and give it a bit of a buffing, then I'll start throwing parts on. I wanted to start today, but my Bro, his handbrake and my Mrs' sister turned up with Birthday cards for me, so it seemed a bit rude to tell them to fook off so I could play with children's bicycles.

I did manage to get the bits together for a pre build Hutch stylee parts shot

(http://img.tapatalk.com/d/14/03/29/pajemeva.jpg)
(http://img.tapatalk.com/d/14/03/29/egy8epa2.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: 1983 Patterson PR200 Build
Post by: markyp on March 28, 2014, 05:35 PM
ffs Dan,youre milking this,get on and build it ffs and put us all out of our misery ;D
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 28, 2014, 05:42 PM
ffs Dan,youre milking this,get on and build it ffs and put us all out of our misery ;D

I'm making up for all the lazy coontz that don't do build threads.  :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Jaymz on March 28, 2014, 06:23 PM
I'm moist with anticipation
Title: Re: 1983 Patterson PR200 Build
Post by: animal on March 28, 2014, 06:29 PM
ffs Dan,youre milking this,get on and build it ffs and put us all out of our misery ;D

 :2funny:
Title: Re: 1983 Patterson PR200 Build
Post by: rad_pitt on March 28, 2014, 07:20 PM
Glad it arrived safely mate - happy birthday too  :daumenhoch:
Title: Re: 1983 Patterson PR200 Build
Post by: That Swan Guy on March 28, 2014, 07:27 PM
Today's selfie, entitled: Waiting for Dan to build his fookin bike!

(http://www.radbmx.co.uk/archive/albums/xx358/nickswan1/skull_dead_computer_zpsc269a1c1.jpg) (http://s771.photobucket.com/user/nickswan1/media/skull_dead_computer_zpsc269a1c1.jpg.html)
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 28, 2014, 07:28 PM
Glad it arrived safely mate - happy birthday too  :daumenhoch:

Thanks Tom, I'm made up with it mate. :4_17_5:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 28, 2014, 07:29 PM
Today's selfie, entitled: Waiting for Dan to build his fookin bike!

(http://www.radbmx.co.uk/archive/albums/xx358/nickswan1/skull_dead_computer_zpsc269a1c1.jpg) (http://s771.photobucket.com/user/nickswan1/media/skull_dead_computer_zpsc269a1c1.jpg.html)

 :nickswan:

It's a bit like your wanted threads.  :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: That Swan Guy on March 28, 2014, 07:31 PM
Today's selfie, entitled: Waiting for Dan to build his fookin bike!

(http://www.radbmx.co.uk/archive/albums/xx358/nickswan1/skull_dead_computer_zpsc269a1c1.jpg) (http://s771.photobucket.com/user/nickswan1/media/skull_dead_computer_zpsc269a1c1.jpg.html)

 :nickswan:

It's a bit like your wanted threads.  :LolLolLolLol:

 :yahoo_silent:

 :LolLolLolLol:
Title: Re: 1983 Patterson PR200 Build
Post by: Retrodan72 on March 29, 2014, 05:48 PM
Right, so I thought I'd keep you lot happy, and wrap this up. It didnt go without headaches, as basically my OCD started to creep in, and control the build.

I bought the last 1.75 Comp III from Alan's, and decided to use one from another bike. This was great, but when I fitted the new one to the rim, and the old one to the other rim, I noticed that the sidewalls were a different colour, so these 2 tyres are ones I already had. I have also got it into my head that the down tube decal is too far up the frame, so my OCD is saying remove and get a new set, I may do this anyway in the future, as the fork ones are a bit aged, but this adds to the survivor look. AAAARRRRGGGGHHHH!!!!!!

Tom kindly threw in the rear caliper as part of the deal. It's a Formos and in great condition, but it is a slightly different shade to the DC lever - can I live with it??

Anyway, here are some shots I took today, I spent an hour polishing stuff up prior to throwing them on.

(http://img.tapatalk.com/d/14/03/30/e6evazaj.jpg)
(http://img.tapatalk.com/d/14/03/30/enevybyj.jpg)
(http://img.tapatalk.com/d/14/03/30/4avysahy.jpg)
(http://img.tapatalk.com/d/14/03/30/yzape5er.jpg)
(http://img.tapatalk.com/d/14/03/30/bu3u2e2u.jpg)

So here it is, finished.

(http://img.tapatalk.com/d/14/03/30/jy3y2ahu.jpg)
(http://img.tapatalk.com/d/14/03/30/e4yjadeb.jpg)
(http://img.tapatalk.com/d/14/03/30/pybesema.jpg)
(http://img.tapatalk.com/d/14/03/30/qa9yjaby.jpg)
(http://img.tapatalk.com/d/14/03/30/3u6ezyvu.jpg)
(http://img.tapatalk.com/d/14/03/30/egu5ere9.jpg)
(http://img.tapatalk.com/d/14/03/30/epyjy5yn.jpg)
(http://img.tapatalk.com/d/14/03/30/eve5uhu6.jpg)
(http://img.tapatalk.com/d/14/03/30/ana2ega9.jpg)
(http://img.tapatalk.com/d/14/03/30/getamaze.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: That Swan Guy on March 29, 2014, 05:52 PM
Tidy darts that is our Dan :daumenhoch:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: dancetothedrummersbeat on March 29, 2014, 06:04 PM
Very nice Dan. Simple, clean, perfect.
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: CustardLips on March 29, 2014, 06:05 PM
Lovely job there Dan.  :daumenhoch:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on March 29, 2014, 06:08 PM
Parts list and thanks....

1983 Patterson PR-200 frame and forks - Tom/rad_pitt
Hsin Lung pro size bars - Gaz/Rollin72
Suntour power stem - Chris/Jaan
Tange MX2 headset - Moonster
Tange LP lock nut - eBay
Repop a'me rounds - eBay
Generic chrome seat post from spares
Repop Kashimax Aero - Moonster
Repop DC MX hinged clamp - Alan's
Repop DC Tech 3 lever - Alan's
Formos MX 1000 - Tom/rad_pitt
Savage cable - Alan's
DC tan brake blocks - Tom/rad_pitt
Shimano PDMX pedals - Jai
Sugino 180 1 piece crank - Derek/stunt nuts
Sugino spider - from my spares
Sugino 44t chainring - eBay
Rechromed Tange BB - from my spares
KMC chain - from my LBS
Araya 7x style rims - eBay
Gold alloy nips - eBay
194mm Asahi spokes - Gary/bmxxx
Suzue sealed bearing hubs - Dave/Brummie
Wheel building - my LBS
Repop Tioga Comp III 1.75 tyres - Alan's
Dicta freewheel - eBay
Valve caps - ScottyB
Pad set - Andy/Rooski
Donuts - Porkchop
All additional decals - rims, caliper and hubs from Mark @ Retrospect.

Thanks to all involved in helping with parts for this. :4_17_5:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Jaymz on March 29, 2014, 06:25 PM
Finally, was worth the wait, looks great mate
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on March 29, 2014, 07:14 PM
I've bought one of those Uni plate/sticker surrounds off Porkchop. I had already bought a plate off Snav, but it was too small for these bars, but I'm happy Paul got the sale and it will go in the man cave.

Just need a number for this now.

(http://img.tapatalk.com/d/14/03/30/2a4ysy8u.jpg)
(http://img.tapatalk.com/d/14/03/30/ede8y4ej.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Jaan on March 29, 2014, 07:20 PM
Very nice Dan, very nice indeed  :4_17_5:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: factory pilot on March 29, 2014, 07:46 PM
It was worth having to read War and Peace twice during the time it took for you to complete this Dan :D
A lovely clean, simple and classy build there bud :4_17_5:
I'm liking it......a lot! :smitten:
I think the decal should be 3mm lower down though :2funny:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: rad_pitt on March 29, 2014, 07:46 PM
Looks fantastic mate, stop being a fanny  :LolLolLolLol:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: NORTY40 on March 29, 2014, 10:26 PM
Looks great Dan  :coolsmiley:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Mikku on March 30, 2014, 12:01 AM
+1! :smitten:  How does it ride?
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on March 31, 2014, 11:58 AM
Plate now added...

(http://img.tapatalk.com/d/14/03/31/ytudytav.jpg)
(http://img.tapatalk.com/d/14/03/31/avymega8.jpg)
(http://img.tapatalk.com/d/14/03/31/ehuza8a4.jpg)

I've lined it up with the other race bikes I have...

(http://img.tapatalk.com/d/14/03/31/u9yjate6.jpg)
(http://img.tapatalk.com/d/14/03/31/a2etuze6.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: In2bmx on March 31, 2014, 12:00 PM
Awesome work mate  :4_17_5:  that is lovley  :smitten:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on March 31, 2014, 12:03 PM
Awesome work mate  :4_17_5:  that is lovley  :smitten:

Cheers Carl, it's a good review from someone like yourself, known for building superb race bikes.  :angel:

I just can't get the right number for the plate, tried a few, they just weren't right on it.  :-\
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: TORKER mick on March 31, 2014, 12:08 PM
looking very nice dan :smitten: :daumenhoch: about fooking time :tickedoff: ;D
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Mattdub on March 31, 2014, 12:34 PM

Likin' that Dan  ;)
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: animal on March 31, 2014, 08:43 PM
That's superb Fan  :4_17_5: u nearly retired aswell  ::) glad u didn't  :daumenhoch:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: hunterdubber on March 31, 2014, 10:38 PM
What  a beauty  :coolsmiley:


PR200's  are  8). Love what  colour combo you've gone for Danny  ;)  :smitten:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Andy68 on March 31, 2014, 11:03 PM
Crackin job Dan!!!  :4_17_5:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: insectbones on April 01, 2014, 07:37 AM
Lovely that Dan, nice build  :daumenhoch:
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: AKGOFF on April 01, 2014, 08:31 AM
Spot on Dan, cracking job mate.  :daumenhoch:

Adam
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Retrodan72 on April 04, 2014, 09:09 PM
Just received my Oakley's off Matt today, cheers mate.

(http://img.tapatalk.com/d/14/04/05/y7uqa3yg.jpg)
 (http://img.tapatalk.com/d/14/04/05/yqa6ydeg.jpg)


Sent while strangling Kojak from my iPhone
Title: Re: ..::1983 Patterson PR200 Build - FINISHED PICS PAGE3 ::..
Post by: Badbaldie on April 04, 2014, 09:46 PM
Perfect
SimplePortal 2.3.5 © 2008-2012, SimplePortal