RADBMX.CO.UK

BMX General => BMX Chat => Topic started by: MADD DOGG on February 23, 2014, 10:17 PM

Title: LANDING GEAR
Post by: MADD DOGG on February 23, 2014, 10:17 PM: Landing gear forks

drop out are not drilled

are these special or not
Title: Re: LANDING GEAR
Post by: glenboy on February 23, 2014, 10:24 PM: Weren't the first landing gears like that
Title: Re: LANDING GEAR
Post by: hunterdubber on February 23, 2014, 10:32 PM: 1" threaded , non stamped on the Bologna cut and no holes in the dropout .are first gen LG's
Title: Re: LANDING GEAR
Post by: hunterdubber on February 23, 2014, 10:36 PM: Are they like these Russy

My 1st gens

(http://i164.photobucket.com/albums/u24/hunterdubber/PK%20RIPPER/NIKONMay2013414_zpsc1afde6b.jpg) (http://s164.photobucket.com/user/hunterdubber/media/PK%20RIPPER/NIKONMay2013414_zpsc1afde6b.jpg.html)
Title: Re: LANDING GEAR
Post by: MADD DOGG on February 23, 2014, 10:39 PM: Same as them chris...but got SE stamped on wedge bit
Title: Re: LANDING GEAR
Post by: kungfunky on February 23, 2014, 10:45 PM: Gen 1s were tested by the pro's in 79 and out in 80.

A lot of cruiser forks had solid drops and were stamped.
Title: Re: LANDING GEAR
Post by: MADD DOGG on February 23, 2014, 10:56 PM: these are cruiser forks

(http://i61.photobucket.com/albums/h56/spikeybonce/20140223_222448_zps7f2debb5.jpg)
Title: Re: LANDING GEAR
Post by: kungfunky on February 23, 2014, 11:04 PM: Had to be cruiser forks :daumenhoch:

Nice and moderately rare but not overly.
Title: Re: LANDING GEAR
Post by: MADD DOGG on February 23, 2014, 11:05 PM: any idea on value as goin a rider for work but will find cheepies if these are valuable
Title: Re: LANDING GEAR
Post by: Snav on February 23, 2014, 11:37 PM: I have some on a 2hip I put together :daumenhoch:

(http://i112.photobucket.com/albums/n164/snav69/snav69033/_DSC5180.jpg) (http://s112.photobucket.com/user/snav69/media/snav69033/_DSC5180.jpg.html)

:coolsmiley:
Title: Re: LANDING GEAR
Post by: OrgasmDonor on February 24, 2014, 06:22 PM: Thick drops and they are short run early mid forks, Max?, Bren knows what I'm talking about
Title: Re: LANDING GEAR
Post by: ron burgundy on February 24, 2014, 06:31 PM: Quote from: MADD DOGG on February 23, 2014, 10:17 PM
Landing gear forks

drop out are not drilled

are these special or not

You're special, Doggy ^"^
Title: Re: LANDING GEAR
Post by: Bob_Acid on February 24, 2014, 07:05 PM: Have they got the metal plug sticking out the bottom of the steerer tube?
Title: Re: LANDING GEAR
Post by: vestanpance on February 24, 2014, 09:55 PM: Quote from: Bob_Acid on February 24, 2014, 07:05 PM
Have they got the metal plug sticking out the bottom of the steerer tube?

Like this.
(http://www.radbmx.co.uk/archive/albums/u206/b45t4rdtorker/006-2.jpg) (http://s169.photobucket.com/user/b45t4rdtorker/media/006-2.jpg.html)
Title: Re: LANDING GEAR
Post by: MADD DOGG on February 25, 2014, 06:15 PM: No got no plugg