RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Sicura on March 16, 2014, 08:44 PM
-
Hi,
Does any one know if I will be able to easily fit a Tuff Neck power disk onto a Redline double pinch crank?
Thanks for your help!!
-
Yes, you'll need a top hat washer though, think its a 19-23.8mm, sure someone else will confirm.
I did it on my old floval.
MM
-
Thanks!!
-
Is fitting the power disk an easy job? Or is there anything I should know about?
-
Nah, dead easy, if you do it wrong, it wont work, chain alignment is the trick, but you should have spacers in the bottom bracket kit to sort that.
MM
-
Unfortunately not, the crank came on a frame I brought! Any idea where I can the spacers from? At the moment it does not line up, it sticks out to far!!
-
get some pics up, so we can see where you are at.
MM
-
Hi,
This is how it is at the moment. I am waiting for the power disk to come through the post.
Thanks for your help on this!!
-
On the drive side, is there a spacer there in the shape of a cone ???? If so then it could be removed for it to line up better with the freewheel.
-
Hi,
Yes I think there is! It revolves when you turn the pedals.
Thanks