RADBMX.CO.UK
Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: WINI on August 07, 2014, 12:55 PM
-
I have the chance to buy quite a lot of NOS mid gear (more late 90's, early 00's stuff)
Not peanuts to buy the lot, so thought I would see what the interest level was like first. Most of the stuff is along the lines of:
Sun city and Primo Hula Hoop rims
T1 forks
Loads of hubs, allsorts mainly sealed
T1 and FBM chainwheels
Loads of pegs, clamps and stuff
Would there be much interest on here? There's around 34 rims, and would be cheaper than BMX City....
-
I'd be interested in a chain wheel :LolLolLolLol:
-
Poss interested in set of hula hoops,are they chrome?36 or 48?cheers :daumenhoch:
-
If be interested in 48h rims and maybe some other parts
-
I'd be interested in some rims and maybe hubs :daumenhoch:
-
Interested in hula hoop 36 rims, primo hubs, fbm sprocket
-
Hmmm, a bit of interest....I think there may be 2 years of eBaying which I'm not sure I can be arsed with. I'll see how it goes later, thanks for the responses :daumenhoch:
-
do you know what size the chainwheels are Mark? if the any of them are 28t then i'd have one :daumenhoch:
-
do you know what size the chainwheels are Mark? if the any of them are 28t then i'd have one :daumenhoch:
There were all sorts Rob, most looked bigger than 28 but I did spot some smaller ones too
-
Defo mark, always like pegs!
-
id certainly be interested in a number of bits from that era. my favourite time in bmx!
-
yep interested ;)
-
Id definitely be interested in several rims and hubs
-
any Z RIMS ........... :teef:
-
Gonna need clamps, stem, chainwheel, cranks, brakes, seat, foooooooookin big pegs & prob other stuff for my Morales build......
Sounds like it wouldn't put a dent in the pile but every little helps :daumenhoch:
Also quite fancy a le paige now too :whistle:
-
Gonna need clamps, stem, chainwheel, cranks, brakes, seat, foooooooookin big pegs & prob other stuff for my Morales build......
Sounds like it wouldn't put a dent in the pile but every little helps :daumenhoch:
Also quite fancy a le paige now too :whistle:
Ed not buy it then :LolLolLolLol:
-
Gonna need clamps, stem, chainwheel, cranks, brakes, seat, foooooooookin big pegs & prob other stuff for my Morales build......
Sounds like it wouldn't put a dent in the pile but every little helps :daumenhoch:
Also quite fancy a le paige now too :whistle:
Ed not buy it then :LolLolLolLol:
No the miserable sod didn't, admire his will power though :daumenhoch:
Does mean I've gotta stumble through midschool stuff now though "nono"
-
We will guide yuooooooooo ;)
-
We will guide yuooooooooo ;)
That's my worry :LolLolLolLol: :LolLolLolLol:
Gonna put a thread up bout suggestions for the bits :daumenhoch:
-
Sorry to say I've pulled the plug on the deal guys, due to 'unforeseen circumstances'. I'll leave it at that for now.
Chubby, I'm a hairs breadth away from letting the CLP go too. Plus I have a load of other parts coming up soon so I'll let you know if you're looking...
-
Sorry to say I've pulled the plug on the deal guys, due to 'unforeseen circumstances'. I'll leave it at that for now.
Chubby, I'm a hairs breadth away from letting the CLP go too. Plus I have a load of other parts coming up soon so I'll let you know if you're looking...
:chin: hope everything is ok bud, please give me a shout if you do mark, need most parts for this morales & a clp would be nice alongside the B1 :daumenhoch:
-
Just found some pics of the CLP, don't think I could afford it Mark :LolLolLolLol: "wantit"
-
All good mate, I'll give you a shout in a few weeks when I get my sh1t together :daumenhoch: