RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: ED209 on October 11, 2014, 10:52 PM
-
Its the one in the middle I'm after.
The other 2 are an M5 and an M4 that I got of ebay .. but the thread is wider on mine ... any ideas :-)
http://www.ebay.co.uk/itm/M4-M5-M6-M8-A2-STAINLESS-STEEL-ALLEN-BOLT-SOCKET-CAP-SCREWS-HEX-HEAD-DIN-912-/221307549544?pt=UK_DIY_Material_Nails_Fixing_MJ&var=520187427029&hash=item3386f53768
(https://farm4.staticflickr.com/3932/15317245369_9c20e9204d_b.jpg) (https://flic.kr/p/pkwTpp)image (https://flic.kr/p/pkwTpp) by superexstatic (https://www.flickr.com/people/41191589@N08/), on Flickr
-
What's it for Ed?
Could be Imperial thread, what size Allen key fits it?
-
Off of a 90s VG lever Gaz ... will check what firs it
-
Message Rooski Ed, as well as being a top dancer, he knows hardware.
-
I looks like 1/4 unc edd
I should have one I will take a look today :daumenhoch:
-
I looks like 1/4 unc edd
I should have one I will take a look today :daumenhoch:
i concur Phil
-
might be these :-\ pack of 10 :daumenhoch:
http://www.ebay.co.uk/itm/6-32UNC-X-1-4-034-SOCKET-HEAD-CAPSCREWS-A2-STAINLESS-STEEL-10-PCS-/251249006014?_trksid=p2054897.l4275
i normally use A BOLT FROM THE BLUE on ebay, cheap, good A2 grade stainless :daumenhoch: but the site is down at the mo
-
cheers fellas ... you da bolt dan daddas :4_17_5:
-
I looks like 1/4 unc edd
I should have one I will take a look today :daumenhoch:
Hey Phil
Let me know if you have one of those bolts mate :4_17_5:
Has Fatty features dropped off my WAL yet? ;D
1.Ed
-
Try profile racing.
Sent from my iPad using Tapatalk
-
Sir Phil of Sawzall kindly sent me 2 x bolts but they werz too big... the thread is right tho :-)
Will take a pic later so you can see.
-
Get your grinder out and make them shorter, Put a nut on the bolt first though :daumenhoch:
-
Hack saw, vice and a file ::)
-
I mean the 'spacing' of the thread is right ... compared to the ones I had ... but the width of the bolt is too big.
Anyway I'll do a pic in a bit ...
-
I mean the 'spacing' of the thread is right ... compared to the ones I had ... but the width of the bolt is too big.
Anyway I'll do a pic in a bit ...
:LolLolLolLol: Why didn't you say that? Can you measure the diameter of the bolt heads with a vernier caliper?
-
I mean the 'spacing' of the thread is right ... compared to the ones I had ... but the width of the bolt is too big.
Anyway I'll do a pic in a bit ...
:LolLolLolLol: Why didn't you say that? Can you measure the diameter of the bolt heads with a vernier caliper?
I've got a ruler ;D
Heres the one I had off Phil against mine... pics with measurements to follow
(https://farm6.staticflickr.com/5599/15557609602_055a4a0782_z.jpg) (https://flic.kr/p/pGLPjj)image (https://flic.kr/p/pGLPjj) by superexstatic (https://www.flickr.com/people/41191589@N08/), on Flickr
-
(https://farm4.staticflickr.com/3943/15371311240_e20eaff5e9_z.jpg) (https://flic.kr/p/pqiZiA)Q (https://flic.kr/p/pqiZiA) by superexstatic (https://www.flickr.com/people/41191589@N08/), on Flickr
(https://farm6.staticflickr.com/5611/15370813238_5aa0556b2a_z.jpg) (https://flic.kr/p/pqgrgm)Q (https://flic.kr/p/pqgrgm) by superexstatic (https://www.flickr.com/people/41191589@N08/), on Flickr
(https://farm4.staticflickr.com/3942/15370944917_b60cdf148f_z.jpg) (https://flic.kr/p/pqh7pF)Q (https://flic.kr/p/pqh7pF) by superexstatic (https://www.flickr.com/people/41191589@N08/), on Flickr
-
Bring it with you tomorrow Ed and I will let you rummage through my spare bolt box while I load the car up for Beast - you never know I might have one in there :daumenhoch:
-
still looking :(