RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: nitrohopper on August 14, 2015, 10:25 PM

Title: Phil n zeds
Post by: nitrohopper on August 14, 2015, 10:25 PM

Hey guys I have some phil hubs and a set of nos black z rims can anyone advise as to spoke length as drive side of rear hub is larger than other does anyone know how I can sort this small dilemma thanks lads (http://images.tapatalk-cdn.com/15/08/14/bde040643dad8eb083ed8a4a9160d7a8.jpg)(http://images.tapatalk-cdn.com/15/08/14/7e4cf94d7b58b5e442ca7510555cc0a4.jpg)(http://images.tapatalk-cdn.com/15/08/14/a499abaa47c6d952a53a078cc3896c1e.jpg)

Sent from my D6603 using Tapatalk

Title: Re: Phil n zeds
Post by: nosepickben on August 14, 2015, 10:44 PM

Easy, just give me the hubs,
Seriously, there'll be no problem there. My gsport ratchet hub has very different flange diameters but laced up fine with the same length spokes either side.
If you're really worried, get the measuring apparatus out and use the DT Swiss spoke length calculator (google it) and round up the answers to the nearest mm or two.

Title: Re: Phil n zeds
Post by: Munnyella on August 14, 2015, 10:48 PM

get a decent measuring thing and look here

http://www.wheelpro.co.uk/spokecalc/

Hyper link button not working.

Simple really, even I can do it!

MM

Title: Re: Phil n zeds
Post by: kungfunky on August 16, 2015, 06:09 PM

What spacing is the rear hub ? Looks pretty wide