RADBMX.CO.UK

Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: gary67 on October 09, 2015, 11:27 PM

Title: Haro M6 Master
Post by: gary67 on October 09, 2015, 11:27 PM

Bought this survivor of a forum member, needs a new set of rims,ordered some Sun BFR's as hubs are fine,turbine freecoasters good.Not sure if i will keep the cranks one piece or slam some Powerbites on,it'll make a good  flatland bike for the winter. Needing a full set of used alloy pegs for it though,hit me up if you have anything  :daumenhoch:
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151009_192534.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151009_192534.jpg.html)

Title: Re: Haro M6 Master
Post by: ED209 on October 09, 2015, 11:37 PM

I've got some fat Haro pegs you can have Gaz but they aren't alloy

Title: Re: Haro M6 Master
Post by: monteryroom on October 10, 2015, 02:39 AM

Cool paint on these bikes. Reminds me a bit of my Specialized Fuse 4 from around the same time.
If you wanted to go all out on SMALL flatland cranks, Fishbone bikes is back in business, and they have some 120mm 3 pc numbers.
Would look awesome with some 3 pc cranks, though I'd try and keep them no longer than 160mm, bike doesn't look like it has much room between the BB, and axle.

Title: Re: Haro M6 Master
Post by: gary67 on October 10, 2015, 11:43 AM

I've got a pair of St Martin ecoflat pros 160mm i could put on,or some powerbites 175mm,an some Profile SS 165mm will see

Title: Re: Haro M6 Master
Post by: gary67 on October 10, 2015, 11:45 AM

Quote from: ED209 on October 09, 2015, 11:37 PM

I've got some fat Haro pegs you can have Gaz but they aren't alloy

Cheers mate,but need alloys to keep weight down or it'll be entering the Heaviest bike thread lol

Title: Re: Haro M6 Master
Post by: gary4130 on October 11, 2015, 08:20 AM

hi gary i've got one pair of big alloy pegs,41/2 inch long and 2inches wide
will get a pic up later for you

Title: Re: Haro M6 Master
Post by: Ba5h on October 12, 2015, 12:31 PM

looking cleaner already mate  :daumenhoch:

Title: Re: Haro M6 Master
Post by: gary67 on October 14, 2015, 08:16 PM

Quote from: gary4130 on October 11, 2015, 08:20 AM

hi gary i've got one pair of big alloy pegs,41/2 inch long and 2inches wide
will get a pic up later for you

Cheers

Title: Re: Haro M6 Master
Post by: gary67 on October 14, 2015, 08:21 PM

Rebuilt the front wheel today,but the og spokes were too short,thought I'd get away with it, but didn't. So ordered the correct length to build F&R with a 4 cross spoke pattern,I'll have them tomorrow so will start on them.

Title: Re: Haro M6 Master
Post by: gary4130 on October 14, 2015, 08:42 PM

pics of pegs gary,let me know if your interested
(http://www.radbmx.co.uk/archive/albums/l79/gary7071/DSC_03181_zpsbdz928x8.jpg) (http://s93.photobucket.com/user/gary7071/media/DSC_03181_zpsbdz928x8.jpg.html)
(http://www.radbmx.co.uk/archive/albums/l79/gary7071/DSC_03151_zpsnurvuzg5.jpg) (http://s93.photobucket.com/user/gary7071/media/DSC_03151_zpsnurvuzg5.jpg.html)
(http://www.radbmx.co.uk/archive/albums/l79/gary7071/DSC_03171_zpszcu2tfce.jpg) (http://s93.photobucket.com/user/gary7071/media/DSC_03171_zpszcu2tfce.jpg.html)
(http://www.radbmx.co.uk/archive/albums/l79/gary7071/DSC_03161_zpsxzmad8yn.jpg) (http://s93.photobucket.com/user/gary7071/media/DSC_03161_zpsxzmad8yn.jpg.html)
never used them,just been in the spares box  :daumenhoch:

Title: Re: Haro M6 Master
Post by: gary67 on October 21, 2015, 05:03 PM

Coming along a bit now. Rebuilt the wheels with BFR's,new tubes an tyres,Primo powerbites with a Profile imperial chainwheel,and i found a set of Fusion alloy pegs. Waiting for a chain,cable and grips
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151019_191700.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151019_191700.jpg.html)
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151021_150625.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151021_150625.jpg.html)
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151021_152637.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151021_152637.jpg.html)

Title: Re: Haro M6 Master
Post by: gary4130 on October 21, 2015, 09:58 PM

looking good mate  8)

Title: Re: Haro M6 Master
Post by: Ba5h on October 27, 2015, 06:56 AM

 :daumenhoch: looking good mate glad it went to good home

Title: Re: Haro M6 Master
Post by: gary67 on October 28, 2015, 04:08 PM

All done. Although may swap seat an post for a pivotal and put some Oddy twisted pedals on,and some new pads,but that will be it for this survivor. Rides pretty smooth aswell.
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151028_154401.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151028_154401.jpg.html)
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151028_154335.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151028_154335.jpg.html)
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151028_154246.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151028_154246.jpg.html)
(http://i1029.photobucket.com/albums/y356/TheG67/Mobile%20Uploads/20151027_175350.jpg) (http://s1029.photobucket.com/user/TheG67/media/Mobile%20Uploads/20151027_175350.jpg.html)