RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: Waxintaxin on January 05, 2016, 07:13 PM

Title: Suntour sealed bearing hub size
Post by: Waxintaxin on January 05, 2016, 07:13 PM

Anyone know the size of the sealed bearings in suntour sealed hubs as I have to replace a set

And I assume an engineer can put them back In etc

Thanks

Title: Re: Suntour sealed bearing hub size
Post by: sawzall on January 05, 2016, 07:35 PM

there should be a number on the bearing rich,

try putting the number in a search on ebay you should find them on there :daumenhoch:

Title: Re: Suntour sealed bearing hub size
Post by: rodriguez on January 06, 2016, 01:33 AM

I got some a while back and there is indeed a number on the bearing, they are a fairly common size and you need the rubber seal version, the originals were made for Suntour by SKF as far as I remember.

IIRC these are the ones but can confirm if you need.

http://www.wiggle.co.uk/hope-6001-2rs-bearing/