RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Flovalwolfie on July 25, 2016, 12:42 PM
-
Hi
I have just bought one of the re-issued Jad stems and its raw and unpolished, I was to have it professional polished to get it mirror shine, like a brand new 1990 PK Ripper ....... as shine as I can get it was autosol and duraglit its no substitute for a professional polish. Can anyone recommend anyone ? someone who knows what they are doing and won't polish the Jad logo engraving on it ?
Many thanks for any help
-
Hi Mate not sure where you are based if you can get the stem to me I have a morning at my mates workshop polishing a load of bits ..
I have a set of "kneesaver" bars with a nice Haro logo engraved which I will keep ...
-
horses for courses I guess but personally I hate the polished mirrored shine finish, just doesn't look real to me.
-
Leave it au natural dude, it's probably the last original finish one left.
-
You should be able to achieve a mirror finish with the equipment you have, the prep work is probably at fault. you need to first wet sand the stem with wet n dry to smooth out all the casting marks taking care not to rub the stamp out!!. Work up the grades til you reach P1200 or so,Starting with a P320 or upwards...Then polish with Autosol and a lot of elbow grease.....Then crack a beer and admire yoyur work! I used to be a fan of the highly polished look when I first got back into the hobby but prefer original and untouched these days....your bike, your choice :daumenhoch:
-
As above 100% as it's easy as fook.
I use peek polish as it's a smoother paste