RADBMX.CO.UK

BMX General => BMX Chat => Topic started by: radovr on December 18, 2016, 07:39 AM

Title: ACS Stoker 9/16 help
Post by: radovr on December 18, 2016, 07:39 AM

Hey guys
need some help in finding the right spindles/axles , i'm chasing a pair of 9/16 to fit ACS Stoker pedals . Iv'e seen a set on here on a bike but can't remember where or what bike and don't know if they were already 9/16 for that matter .

Title: Re: ACS Stoker 9/16 help
Post by: MartyC on December 18, 2016, 11:51 AM

A lot of spindles are interchangeable Steve, have a look at this old thread...

http://www.radbmx.co.uk/forum/index.php/topic,133828.msg1291722/topicseen.html#msg1291722

Title: Re: ACS Stoker 9/16 help
Post by: rooski on December 18, 2016, 05:51 PM

Try the spindles off some Rat traps, the bearing cap sticks out on this type of pedal, so the spindle is longer.

Just swapped some hti and victor rat trap spindles and they are 125mm, may be just enough for what you need. :)

Title: Re: ACS Stoker 9/16 help
Post by: radovr on December 18, 2016, 09:23 PM

Thanks for the tips guys , much appreciated.