RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: monkian on January 03, 2017, 01:51 PM

Title: Fitting Tange Fork Decals
Post by: monkian on January 03, 2017, 01:51 PM

Just thought I'd share this as it might be useful to someone ;)

(http://uploads.tapatalk-cdn.com/20170103/a40c42f178f23bd870b2167f30cf63d7.jpg)

(http://uploads.tapatalk-cdn.com/20170103/21968fab7c05b497785fe5d27de17206.jpg)

(http://uploads.tapatalk-cdn.com/20170103/a03720ccdd8c2539f44e3f9e58ceb005.jpg)

(http://uploads.tapatalk-cdn.com/20170103/f0aa4f41c6aa1cfd1c0d0de54b911a67.jpg)

(http://uploads.tapatalk-cdn.com/20170103/7d27efd68a6c2d8c39aaabef15a065f6.jpg)

Little tip when fitting TRX decals (at 32mm wide, to oval tube TRX), for alignment, you can run the top edge of the decal alongside the flat front edge of the tube (see below) ;)

(http://uploads.tapatalk-cdn.com/20170103/24042345ef50f8353a6a5a4bd3f9db2a.jpg)

Title: Re: Fitting Tange Fork Decals
Post by: SiGhTeK on January 03, 2017, 02:30 PM

Loving the precision here paul...

P.S i will get back to you about them parts......1st day back at work 1st day back in front of the comp and 1st day of the yr on RAD

Title: Re: Fitting Tange Fork Decals
Post by: monkian on January 03, 2017, 02:37 PM

Hey, thanks Si. Catch up with you soon mate ;)

Title: Re: Fitting Tange Fork Decals
Post by: Mikku on January 06, 2017, 11:28 AM

Yeah, top job that mate! I could have done with something like that for those TX-1200 decals you sold me! :daumenhoch:

Title: Fitting Tange Fork Decals
Post by: monkian on January 06, 2017, 01:16 PM

Ironically, I've never had to do a set myself. I'm sure you got it sorted but I'll add them asap ;)