RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Quadog on February 18, 2017, 12:28 PM
-
Haro experts please help
Is there a difference between 1985 Haro bars and 1987 bars I was thinking of putting some of the repop ones from Alan's on my 87 Master Looked at some pics they look very similar just need to know before I order some 87 decals
Cheers Scott
-
I think there are some differences but they are small and probably down to measurements/knurling patterns/stampings mate..
To be fair you'd be hard pressed to find a matching pair of OG ones from 85,86 or 87 ... Production and those differences mentioned above changed all the time at Anlun!
Long story short ... They'd look reet mate :daumenhoch:
-
As Ant said I think there are slight differences in the sweep/ knurling /stamps but to all intents and purposes they are the same. You may have to get a chrome pair and paint the bottom half black for an 87.... :daumenhoch:
-
Some top info here. The power of RAD :daumenhoch:
-
Cheers for the info dudes they'll be a few more questions on this build so all answers are greatly appreciated
-
I thought 85 ones were a bit taller?
-
I thought 85 ones were a bit taller?
The very early ( 1st Gen ) were wider and taller and stamped Anlun ( these are the most rare - I've got them on my early 85 master ) but production was very erratic after that.
-
I had a late 85 and that had smaller diameter tubing with a larger diameter just on the stem clamp area and it was knurled. I think they only did them for 1 year only like that
-
I thought 85 ones were a bit taller?
The very early ( 1st Gen ) were wider and taller and stamped Anlun ( these are the most rare - I've got them on my early 85 master ) but production was very erratic after that.
The ones I had on my 85 master were (I think) from 87
Not Anlun made though, I forget the make but there's a thread possibly still on here somewhere
They were lower rise then the ones you're on about anyway
-
Found the thread - they were made by Leadtec