RADBMX.CO.UK
BMX General => BMX Chat => Topic started by: That Swan Guy on October 24, 2017, 03:29 PM
-
For the third winter running no new build for me but I am giving them all an overhaul.
Starting with this bad boy.
Swapping the Suzue hubs out for GT gen 1.
[attachment=4]
The Cyclecraft 24 need a complete rebuild as it's been ridden in all weathers this year.
[attachment=1]
And this will get the correct fork standers too.
[attachment=2]
This should be getting a GT seat.
[attachment=3]
What have you got going on in the back ground?
Get your pics loaded fistblump
-
Seem to have a midschool flavour going on, tinkering with GT show,quamen clad 1 & sunn El palomino.
Old school wise I've Jamis laser 2001,street devil & free agent freeflite bubbling away...(https://uploads.tapatalk-cdn.com/20171024/244c8f45ebd313e9fa90947916220910.jpg)(https://uploads.tapatalk-cdn.com/20171024/c6d11e2c181cc0fcc287de502df8513c.jpg)(https://uploads.tapatalk-cdn.com/20171024/fbd6ca853b38da82a1e7ff3811641c82.jpg)
Sent from my HTC One M9 using Tapatalk
-
1996 DB Venom (complete new build)
1985 GT Pro (complete rebuild)
1984 Aero Reflex (partial rebuild)
-
I may consider putting this together......
-
And I am still after a genuine set of GT pads for this.....
-
First I'm close to finish my beloved Performer. I still need gen-1 fork standers for this.
(https://s5.postimg.org/ihmpiolaf/SNV33546-1.jpg) (https://postimages.org/)
Then I need a place to give this Sport a bath as I don't have the room in my house. I haven't decided yet if I do the frame repair as well and then building it to it's original spec, or just give it a bath and pass it on. But I'll keep this as a survivor for sure.
...sorry for the shitty pics :-[
(https://s5.postimg.org/7erhjga87/SNV33912.jpg) (https://postimages.org/)
(https://s5.postimg.org/y5glr0udj/SNV33899_lighter_close_up.jpg) (https://postimages.org/)
:daumenhoch:
-
Ordered my first FBM frame and fork that's being built for me with some cheeky bars, picking it up in January. Some how ended up with two more Sunday pro's that need a clean, don't know how that happened, am sure I will end up buying something else and then wondering why.
-
Nowt, had the Burner GS project on the go for the last 3 or 4 years but never been bothered to get the thing painted so just sat there. Looks like someone else might be taking it on though :daumenhoch:
-
[attachment=1]
Your winter , our summer here but have this to look forward to on xmas day
-
This summer I may actually put my Patterson Pro Long together...
-
Just my Burner project ATM. Taking it for powder next Tues. Then of course I need to go around my 24" quad and tighten everything up after the first few rides :)
-
This summer I may actually put my Patterson Pro Long together...
Yes please! One of my favourite ever frames! :daumenhoch:
Nothing as fancy, but I've got my Redline build to be getting on with, and a few odds and sods to sort out on the Crupi.
-
The silver streak. Nice slow build to keep my mentally sane through the winter.
-
OM Flyer.
[attachment=1]
-
OM Flyer.
[attachment=1]
Looks rubbish, send it over to get some proper sunshine :D
-
Got these two to finish almost there just can decide what cranks to go with on the Master would love some peregrines but fear they would be to expensive just need to find a decent alternative ☹️
-
Sorting out my 1979 Torker, got some issues with it (stuck in seat post for one!) but getting there, pretty much got all of the parts now also :daumenhoch:
-
'99 hoffman condor
big daddy
haro sport
boss freestyler
few tweeks to 2 of my streetbeats ,TA,prolite freestyler
every time i try to start with one the misses finds 'a few small jobs'for me to do,like building an en suite of changing/adding radiatoirs /fitting new doors/paintint/wallpapering :2gunsfiring_v1: :tickedoff:
-
Nothing :'( I'm beginning to Twitch
-
Nothing :'( I'm beginning to Twitch
You need to start using that Lapier a bit more then ;) :daumenhoch:
-
Nothing :'( I'm beginning to Twitch
These symptoms are not necessarily a bad thing Carlos. :D
-
Wheels done for this one, just need to refit the tyres and get it all back together gain before starting on the next.
[attachment=1]
[attachment=2]
-
lets see how this turns out!
[attachment=1]
[attachment=2]
[attachment=3]
-
I've got a Patterson PR200 and a TNT XL will be getting a little attention over the next few months. :daumenhoch:
-
Wheels done for this one, just need to refit the tyres and get it all back together gain before starting on the next.
[attachment=1]
[attachment=2]
Nice, a trike?
-
Wheels done for this one, just need to refit the tyres and get it all back together gain before starting on the next.
[attachment=1]
[attachment=2]
Nice, a trike?
:nickswan:
-
(https://uploads.tapatalk-cdn.com/20171103/7134e6bdad357dff8775f4104bfe126c.jpg)
Got this 1984 Peugeot to keep me busy over the winter months. Was going to paint it but the chromes that good an oxy bath will sort it. Build thread coming soon.
Sent from my iPad using Tapatalk
-
Got this 77 Proline non gusset to strip and paint over the winter. It's powdered at the moment badly. OG decals don't exist so Delcals it will have to be.