RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Clean on March 16, 2019, 02:28 PM
-
So, I’m building again! :2funny:
I have come across some decal adhesive residue the likes of which Beelzebub himself would be proud of having shat. :-\
So, I have tried Nail Varnish Remover with no success.
I have emptied a 50 ml bottle of industrial Acetone, with slightly more success, but at a rate that will require several hours and a litre of the fooking stuff if I am to strip the frame clean.
So, RADsters, can you please help? The winning tip will receive a Wank Sock. :daumenhoch:
Thanks,
Dirty,
-
WD40 and a stanley blade...and you can keep the sock. :-\
-
I used out of date Boss aftershave :LolLolLolLol:
Gave me a fookin stinking headache though!
-
Fook all that Rich...Cellulose thinners is your friend :daumenhoch:
-
Thinners and meths :daumenhoch:
P.s can’t wait to see this finished 8)
-
Aftershave goes out of date?
-
Aftershave goes out of date?
It smelt fookin horrible
-
I only ever use meths
-
I only ever use meths
As aftershave?
-
A bit of heat to it works well. Not too hot. A hair drier will do it. Good luck fistblump
-
Oil works well as a dissolver of stickeyness - rub cooking oil on and let it soak, this is why WD40/penetration oil (not that type ;))works.
Finish with Meths or my favourite IPA (no not that type either)
Can I have a left sock?
MrD
-
Always found WD40 worked well
-
Took me 2 days, an insane amount of kitchen towel, white spirit & a wrecked pair of gloves, turned into glue mitts, to get the residue off mine. And that was on a repop frame.
-
Always used Sticky Stuff Remover fistblump works a treat
https://www.ebay.co.uk/i/153349454543
-
I only ever use meths
As aftershave?
Yeah and I use aftershave for adhesive remover ;)