RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: stuntmaster on November 12, 2006, 08:57 PM

Title: washer on profile cranks
Post by: stuntmaster on November 12, 2006, 08:57 PM

where do you get them from as after cin today my chain ring is chewed as there nothing to hold the chainwheel to the arm ie only the allen key bolt

Title: Re: washer on profile cranks
Post by: stuntmaster on November 13, 2006, 04:04 PM

it`s a cup washer i need as spoke to someone in a shop and they sell them with some chainrings but only want the cup and the chainring was 20 quid .anyone

Title: Re: washer on profile cranks
Post by: snav69 on November 13, 2006, 04:26 PM

Is it one of these you are after

http://www.alansbmx.com/product_info.php?cPath=32_34&products_id=2343

I am going to alans on weds (only down the road from me) , if you want you can send me the £3 for it and i will post it for free.Just give me the size you need before hand  :daumenhoch:

Or you can just order it direct  ;)

Paul  :coolsmiley:

Title: Re: washer on profile cranks
Post by: lazychubs on November 13, 2006, 05:54 PM

paul i made me own from a set of old skool bars mate just cut the size i needed lol
may still have it if u get stuck

Title: Re: washer on profile cranks
Post by: stuntmaster on November 13, 2006, 09:19 PM

i have a look at that rhys as got a set of crap bars laying around

Title: Re: washer on profile cranks
Post by: lazychubs on November 13, 2006, 09:34 PM

deffo works mate and still have the bit if ya need to try it lol
plus was a nice tight fit lol