RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Frosty on March 26, 2007, 12:43 PM
-
OK, I know this is a question repeatedly asked but I cannot locate a definative answer and need help.
For the 401 two piece dimpled (looseballe) spindle, what is the thread or bb kit that will fit?
The next question is on the sealed crupi type spindle. The spindle is 19mm for the 401's again, but I need to replace the bearings as they are shagged!! Does anyone one know what size and ref number of bearings I need? The ones that are knackered by the way are the common 6402rs?? but these are 21mm and have been sleaved down internally to match the 19mm spindle, and as well as the bearings being shagged so are the sleaves.
If no one knows the bearings to fit does anyone know where I can get the sleaves??
Thanks
Paul
-
OK I have found an answer to the first question about the thread size (it was on a document I gave to Ratty for the Redline thread) 28 thread and a Tange TK4801 bb :uglystupid2:
Still need to know about the sealed stuff
-
Paul,
I have found a used profile 19mm bearing set - they are used, but spin fine. I think I also have some cups for them.
If you wanna try them out let me know - might be worth a try.
-
Paul,
That would be great. I've pm'd you.
Ta
Paul
-
If the profiles do fit, can you let us know so we can add that info to the redline flite thread! Thanks
-
I'll get them postd in the next couple of days.
Let us know how they fit.
-
Will do.