RADBMX.CO.UK
Old School BMX 1980 - 1988 => Old School Race (riders ready, pedals ready... GO!!) => Topic started by: jimwise68 on April 18, 2007, 09:12 AM
-
Couple of quick drafts around the Haro series 1 plate.
LMK what ya think.
These are only initial drafts and only took about 10 mins so be nice! :laugh:
(http://www.radbmx.co.uk/archive/albums/j135/jimwise68/OSSS_2007.jpg)
The last one leaves a bit of space for sponsorship logos. :daumenhoch:
-
Very good Jim, My Fav is plate 2.... :4_17_5:
-
2 or 3 look good :)
-
I think 3 would be best on a T shirt, 2 would be good as a cut out sticker.
-
I'd say the same as S&MAlex :daumenhoch:
-
Here are some colour alternatives
(http://www.radbmx.co.uk/archive/albums/j135/jimwise68/Tshirt.jpg)
-
Thats wicked Jim! a how do you manage to get that red cross in the middle of that white square ;)
-
is it not showing?
I'll post it again.
-
replaced the link
damn intraweb not liking CMYK images :knuppel2:
-
Sorry to P*ss on your fireworks so to speak.....but i think the plate would look great on the back of the T with your username either under or above the 2007. Just an idea?? :-\
Although you'll have to come up with something else for the front? maybe just something small over the left nipple?
-
Rob
all comments welcome mate. It is not set in stone and deffo not excreting on my pyrotechs.
Sounds like a good idea, but don't know whether we are printing front and back.
Ratty?
-
Just thought people would see your back more (as you race past them into first place) :daumenhoch:
On another note.....you coming to Epic in June you big Lord?? ;D
-
I will PM Mark, see if we can squeeze a print on the front out of the budget!!!
-
Hi Jim, I was thinking of a shirt with " My wife said it's BMX or me" - " I'll miss her " and then a group picture of all the Old School lads underneath. What do you think?
-
im liking logo 3
the idea of stickers is cool
and name on back is a good touch also,and i think our names should be the same font
-
Hi Jim, I was thinking of a shirt with " My wife said it's BMX or me" - " I'll miss her " and then a group picture of all the Old School lads underneath. What do you think?
that would make a great T shirt for MK in the summer :daumenhoch:
-
jim and you a professional ??? ??? ??? chain wheels and number plates ? :-[ i know its only 1 colour but me thinks you could do better
how about a sillouette of a start gate line up everybody standing up about to pop out the gate
or a sillouette of a racer sliding like clint on his kuwi like this
(http://www.radbmx.co.uk/archive/albums/c324/flaz/clintmiller_01.jpg)
come on all you designer photoshop people, lets have a few more ideas ? give ole jimbo a bit of competition wheres spicy bob ? or bruce, stace cant you russle up a quicky ;D lee hooga your into all this aswell
-
I'll see what I can do quickly ? :-\
-
Hi Jim, I was thinking of a shirt with " My wife said it's BMX or me" - " I'll miss her " and then a group picture of all the Old School lads underneath. What do you think?
that would make a great T shirt for MK in the summer :daumenhoch:
oh and lets remember that www.radbmx.co.uk and the old school summer series are a seperate entity and im sure radbmx will be doing their own mk 2007 t-shirts so no cross overs on the t-shirt designs
-
Something like this any good?
(http://www.radbmx.co.uk/archive/albums/h254/stace2406/SummerSeries.jpg)
Bit rough around the edges but you didn't exactly give me long to knock something up, I can always tidy it up if its in the right direction?
Oh the horse Idea came from a Sun Rims advert from an 82 bmx mag !!
-
yep instead of horses have bmx's either side with the number plates facing towards us would be well cool
-
I'll try and pop Clint in !!
-
yep instead of horses have bmx's either side with the number plates facing towards us would be well cool
Fookin hell.......not fussy then ::)
;) ;D
-
jim and you a professional ??? ??? ??? chain wheels and number plates ? :-[ i know its only 1 colour but me thinks you could do better
how about a sillouette of a start gate line up everybody standing up about to pop out the gate
or a sillouette of a racer sliding like clint on his kuwi
PMSL
Flaz, you think I'm gonna spend hours doing loads of retouching work off the bat as an initial design! :uglystupid2:
It's an IDEA for a t-shirt, not the finished t-shirt design. :LolLolLolLol:
If it is liked then I can add all the finishing touches to make it look a whole lot better.
It's just a concept for a T-shirt mate! ;D
-
if we can only have our t shirts printed on the front, I will wear mine backwards Kris Kross style, so you know who I am when I go flying past ya :LolLolLolLol:
I might have a little go later, but I forgot I was supposed to be doing the design for the number plates.
Ratty if you are coming to MK bring down that uni plate so that I can get the measurements. I have the design down in my head I just need the plate to get the size and shape :daumenhoch:
-
no 2 for me jim
-
Scuse the hijack ... :LolLolLolLol: :LolLolLolLol:
FLAZ ,my good man ... would you be so kind as to add the rest of the Clint Miller article as i was just getting into reading it when i ran out of page, :tickedoff: :tickedoff:
Many thanks good sir.
Matt
-
plate 3 looks the best
-
They all look fine to me Mate if you could squeeze your user name on there as well that would be superb ....
-
if we can only have our t shirts printed on the front, I will wear mine backwards Kris Kross style, so you know who I am when I go flying past ya :LolLolLolLol:
I might have a little go later, but I forgot I was supposed to be doing the design for the number plates.
Ratty if you are coming to MK bring down that uni plate so that I can get the measurements. I have the design down in my head I just need the plate to get the size and shape :daumenhoch:
Lee, I have a uni plate mate.
-
it look like number 2 for the shirts
-
Thought I'd add this to the mix....
(http://www.radbmx.co.uk/archive/albums/m123/nic968/Misc/OS_SS2007_T_Shirt01copy.jpg)
-
Thats cool, its a bit late though, we decided the design on Sunday :-\ :daumenhoch:
-
What was the final decision Tony?
-
Top Secret ::), unless you paypal me hundreds of dollars :shocked: :2funny:
Its jims haro plate, the number 2 version, Jims just tidying it up ready for the printers :4_17_5:
-
Tried to add a few bits, but it just made it too busy.
So resorted to this:
(http://www.radbmx.co.uk/archive/albums/j135/jimwise68/OSSS-2007.jpg)
simple and effective, just how I like my women! ;D
-
Yes Jim, thats deffo the one!!! :4_17_5: well done mate
-
Tried to add a few bits, but it just made it too busy.
So resorted to this:
(http://www.radbmx.co.uk/archive/albums/j135/jimwise68/OSSS-2007.jpg)
simple and effective, just how I like my women! ;D
Or simple and on there backs?? :daumenhoch:
-
They don't have to be on there backs to be effective ::)
BTW the Tees look good Jim, when will they be ready?
-
Anyone who wants one please see the thread in the OSS section :daumenhoch: