RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Dark Diggler on May 24, 2007, 09:50 AM
-
Just got a set from the states and the bearings are ok, but will need replacing soon, are they the same as Profiles i.e 19mm or are they 20mm as I think having measured them ???
Oh and has anyone got any o/s decals yellow/ green , they are going on this:
(http://www.radbmx.co.uk/archive/albums/p70/simonjturner/BMX001.jpg)
-
they are on the bay quite often.
especially in the states.
redline prolines are 20mm, id wait till you got the cranks to be sure.
-
they are on the bay quite often.
especially in the states.
redline prolines are 20mm, id wait till you got the cranks to be sure.
Got em, they are flights not prolines :daumenhoch:
-
i know, but they are reasonably likely to have the same spindle i think. could be wrong.
-
i know, but they are reasonably likely to have the same spindle i think. could be wrong.
Ahhhhhh :D :daumenhoch:
-
http://www.alansbmx.com/product_info.php?products_id=2106
-
Cheers Phil :)
-
looks like i was wrong.
http://www.amazon.com/dp/B000IQCLQW/ref=nosim/'tag=yahoo-sg-20&creative=380333&creativeASIN=B000IQCLQW&linkCode=asn
i was sure that ruler measured his prolines to be 20mm.
-
looks like i was wrong.
http://www.amazon.com/dp/B000IQCLQW/ref=nosim/'tag=yahoo-sg-20&creative=380333&creativeASIN=B000IQCLQW&linkCode=asn
i was sure that ruler measured his prolines to be 20mm.
coolio :daumenhoch:
-
liking them torkers, been tempted by a couple in the past, bet it'l ride well :daumenhoch:
-
Hey Mr Ferret, you were correct in the 1st, I have just attempted to ram said spindle through profile 19mm bearings, It no fit :shocked: so 20mm it is :daumenhoch:, spanish repl. bb's at alans £9.99 ...............................Yes yes oh yeah :LolLolLolLol:
-
spanish?
-
do you need spannish then ? I thought they were non threaded versions of the Euro BB, made for bike produced within the last 2 years ?? and why are they called spannish ? :D
-
http://www.alansbmx.com/product_info.php?cPath=32_35&products_id=4276
Same as profiles but 20mm hole :shocked:, dunno why spanish though, maybe they are made from reconstituted pontefract cakes :D
Spanish=cupless bb . from what I can gather :-\
-
Anyhow DONE!!!!
(http://www.radbmx.co.uk/archive/albums/p70/simonjturner/Torker2.jpg)
39/16 too, for ramp action :LolLolLolLol:
-
fook knows how you did that. I thought spanish bb were same as US bb, but a smaller bottom bracket, on the frame. Allegedly spanish bb are just the bearings, without alloy cups that the bearings sit in.
saying all that, that bike looks well with them cranks on now.....good job my man!
-
the new cranks look killer dude !! nice !!
-
are they twin or single pinch
-
are they twin or single pinch
Not tellin :LolLolLolLol: