RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: wildwood1971 on June 07, 2007, 12:41 AM

Title: help sugino ct cranks
Post by: wildwood1971 on June 07, 2007, 12:41 AM

help ! anyone got a guide on how to fit sugino ct 3 piece cranks - im a newbie and seem to have a lot of bits and no brains! im using a tange sealed b/b so please if anyone can help id appricieate it.

Title: Re: help sugino ct cranks
Post by: sonic-1 on June 07, 2007, 05:22 PM

got same crank n same prob need torque settins for bolts to hold arms on to !!!!!!! no not do it up tight  :2funny:

Title: Re: help sugino ct cranks
Post by: brass monkey! on June 07, 2007, 05:45 PM

my brother fitted mine no probs. i'll ask him what he thinks......

Title: Re: help sugino ct cranks
Post by: FuNMoNsTeR on June 08, 2007, 03:10 AM

Try This:  http://www.parktool.com/repair/byregion.asp

 :daumenhoch:

Title: Re: help sugino ct cranks
Post by: mark 2 on June 08, 2007, 11:05 AM

I've got a couple of pairs of them just try and fit the spindle so it's quite equal either side in the b/b, tighten the b/b and then add the arms. As the spindle's tapered it should just go on so far and then just tighten the bolts.

Title: Re: help sugino ct cranks
Post by: kdw712 on June 08, 2007, 11:36 AM

don't forget to put a dab of grease or copper slip on the spindle
may be handy later if you ever wanna get the arms again


 :daumenhoch:

Title: Re: help sugino ct cranks
Post by: wildwood1971 on June 10, 2007, 12:01 PM

thx for ya help guys after a little teaking got mine running a dream. Paul