RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: scary_leary on November 11, 2005, 09:58 PM

Title: Crank help needed...
Post by: scary_leary on November 11, 2005, 09:58 PM: the hole in my sprocket is way bigger than the crank..is this normal?
if not what do i do?

cheers
Lee

(http://www.radbmx.co.uk/archive/albums/v605/scary_leary/crank.jpg)
Title: Re: Crank help needed...
Post by: CD17 on November 11, 2005, 10:06 PM: You will need to get a reducer, Think I might have one spare if you need one, is the spindle 19mm.
Title: Re: Crank help needed...
Post by: Rombloke on November 11, 2005, 10:10 PM: bloody hell scary...are you that old school....

and what about a full pic of that hoff

Dave
Title: Re: Crank help needed...
Post by: scary_leary on November 11, 2005, 10:16 PM: yes Dave im that old school... :-[ pics soon (not finished yet) ;)

t/a the spindle is 18mm will your spacer do?
Title: Re: Crank help needed...
Post by: CD17 on November 11, 2005, 10:19 PM: 18mm you sure, what cranks are they ?
I'll have a look to see if I can find it, if they are 18mm it will be a bit big, but should be ok.
Title: Re: Crank help needed...
Post by: scary_leary on November 11, 2005, 10:39 PM: yep they are 18mm
the cranks are GT..same as below

(http://www.radbmx.co.uk/archive/albums/v605/scary_leary/CopyofPicture3119.jpg)
Title: Re: Crank help needed...
Post by: Rombloke on November 12, 2005, 12:21 PM: thats 19mm then im sure....i think its industry standrd size....could be wrong tho....although if i am i will delete this post so it dont matter :)

Dave