RADBMX.CO.UK
		Technical & Reference Section => Tech and Restoration => Topic started by: superbikedan on August 22, 2007, 08:40 PM
		
			
			- 
				was asked if i could post a     how it's done  post on two tone colours,
 
 well been working on these two for damian,  highrisedrifter, ;)
 
 
 so this is how it's done
 
 step 1  raw frame, cleaned and ready to mask
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone003.jpg)
 
 2  done this masking by looking at a picture :)  and always paint the smallest area first
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone005.jpg)
 
 3 first coat
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone010.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone011.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone012.jpg)
 
 4  painted area masked and ready for second colour and finish  this is the green/white frame
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone001.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone004.jpg)
 
 5  final finish   job done :coolsmiley:  when the decals go on these will look :daumenhoch:
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone008.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone007.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone009.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone006.jpg)
 
 red/ white frame being finished tomorrow
- 
				wow mate. Fantastic!  :smitten: :smitten:
 
 Thanks very much!  :daumenhoch: :daumenhoch:
 
 HRD
- 
				cool stuff dan....
 
 i love the magic trick of coating it red, then covering it in tape doing the rest of it and the middle turns to green...  :LolLolLolLol:
- 
				cool stuff dan....
 
 i love the magic trick of coating it red, then covering it in tape doing the rest of it and the middle turns to green...  :LolLolLolLol:
 
 
 :-[ there is a reason for this,  i forgot to take a pic of the green at the first stage ;D :crazy2:
- 
				seriously though dan, they look the business.  :daumenhoch: 
 
 i was thinking of getting a new school frame coated in the skyway two tone style.
- 
				I can't wait to get these built up now. I've got the green bits from Tefore#s yellow and green GT Performer and some red bits from Daz to go on the red one. Including corresponding alloy tuffs for each.
 
 :4_17_5: :4_17_5:
 
 Top stuff, Dan. Very much appreciated.  :daumenhoch:
 
 HRD
- 
				finished the red/white frame today,  this i think is my fave even though both are lovley
 
 think highrisedrifter is going to have some happy building 8)
 
 last  the red&white
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/skywaytwotone007.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/skywaytwotone004.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/skywaytwotone006.jpg)
 
 now the two  ;)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/twotone006.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/aa37/billybmxpurcell/skywaytwotone002.jpg)
- 
				sweet.... :smitten: 
			
- 
				Those looks gorgeous. Thanks Dan, you're a star!  :daumenhoch:
 
 I'm definitely looking forward to building those up. I think I might have to put my hunt for a chrome T/A on hold for the moment!  :D
 
 Thanks mate
 
 Damien
- 
				I dropped my Trickstar into Dan's yesterday and saw a couple of the 2 tones being done. I'm more than happy Dan's doing my pink paint job! Can't wait to get it next week Dan! Jonathan.
			
- 
				proper fascinating post,
 
 cheers for taking the time dan :daumenhoch:
 
 does the masking stay on in the oven dude? is it a special kind of tape?
- 
				proper fascinating post,
 
 cheers for taking the time dan :daumenhoch:
 
 does the masking stay on in the oven dude? is it a special kind of tape?
 
 
 joe  masking stays on but if you dont peel it off early then when the paint gets hot
 
 the masking tape leaves a mark on the paint,
 
 trick is to peel the tape of before the paint gets soft in the oven :)
- 
				I keep coming back to look at these!  :smitten: :smitten: :smitten:
 
 I'm going to enjoy building them up.  :daumenhoch:
 
 HRD
- 
				the maddest thing about painting these is the the green/white frame was the first and the masking
 
 was done by guess work :idiot2:  then copied the second one :coolsmiley:
 
 the shit i do for you boys ;)
- 
				proper fascinating post,
 
 cheers for taking the time dan :daumenhoch:
 
 does the masking stay on in the oven dude? is it a special kind of tape?
 
 
 joe  masking stays on but if you dont peel it off early then when the paint gets hot
 
 the masking tape leaves a mark on the paint,
 
 trick is to peel the tape of before the paint gets soft in the oven :)
 
 
 i'td be great to actually see the whole process sometime :daumenhoch:
 
 i kind of get what you mean but theres this slight whooshing noise above me :LolLolLolLol:
 
 it certainly looks fantastic, i've been looking forward to seeing these too,
 
 just out of interest what code did you use for the red? :LolLolLolLol:
- 
				ral 3020  one of the nicest reds i use
			
- 
				ral 3020  one of the nicest reds i use
 
 
 man i am so fooking pleased to hear you say that like :daumenhoch:
 
 plenty in stock? i'll pm you soon :LolLolLolLol:
 cheers for the info as ever dude :daumenhoch:
 
 
- 
				joe,   i posted this a while back,  a full step by step  on powder,
 
 gives a good insight to how your bikes are done ;)
 
 http://www.radbmx.co.uk/forum/index.php'topic=30909.0
- 
				that red/white 'beat is amazing dan. i would love to get one done myself, but can aybody put AD brake lugs on?