RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: zed4130 on August 27, 2007, 07:52 PM
-
in nearly 2 weeks time i give up my job to look after the kids, so angie can go back to work full time, she loves her job, and it pays well, ive decided as im off to re-train , im going to do a graphic desighn course, plus learn welding, as i want to make frames, probs for myself, and the odd retro one , :daumenhoch: ive got a freing who is a master welder, plus another freind who is a good welder, so ive plenty of help there, i know most things about frame geometry etc, but any extra help will be great, thanks guys and gals for any help :daumenhoch:
-
can't offer any advice, but i am in the same boat, going back to college in 2 weeks to get my city and guilds in electrical installation.
all i can say is good luck and stick at it buddy :daumenhoch:
-
can't offer any advice, but i am in the same boat, going back to college in 2 weeks to get my city and guilds in electrical installation.
all i can say is good luck and stick at it buddy :daumenhoch:
:daumenhoch: you too mate, its abit odd going back to school ??? i never went butd :LolLolLolLol: now i love learning new things :4_17_5:
-
Good luck lads :daumenhoch:
Paul :Great_Britain:
-
i know what you mean.
i met my classmates for the first time in july and i must be 20yrs older than them :shocked:
whos the daddy!!!!!!!? lol
oh yeah, just thought of some advice: don't touch the metal till it's cooled down :2funny:
-
can't offer any advice, but i am in the same boat, going back to college in 2 weeks to get my city and guilds in electrical installation.
all i can say is good luck and stick at it buddy :daumenhoch:
What are you doing Matt? 2381?
:) DINGO :)
-
no mate it's the 2330 now, thankfully i've heard it's been watered down so it's easier to pass, and will be 17th edition by the time i finish
-
I have been a spark for 20 years and did 2391 recently, hard as fook it is :2gunsfiring_v1: but 2330 sets you up well apparently, good luck with it :daumenhoch:
:) DINGO :)
-
cheers dingo.
i heard unofficially that todays teens would never pass the old style exams so it had to be changed, same asd the GCSE's and A levels i suppose :idiot2:
sorry for hijacking the thread Zed :-[
-
I can't offer any advice but I can offer encouragement.
Good luck lads. You'll be fine.
HRD
-
good luck guys,and paul dont forget to wear a mask when welding ;D or you will end up looking like dale winton ;D
-
Good luck with whatever you decide to do Paul :daumenhoch:
Gary..
Welding frames up sounds great :smitten:
-
theres no point in me giving a load of speil about welding if you already know people who do it. but in terms of frame geometry, honestly, and this might sound bias as i've rode there frames for 11 years but check out standards website for angles. there pretty much spot on, which is why all the frames have the same angles and only differ in lengths to give a different feel. shorter back end will give better snap for speed and also balance for manuals etc. shorter front end will be more whippy for park/tech riding and a longer front end will be nicer in the air over trails with more stability. make sure you get a good jig for holding the tubes and keepit basic to start off with. i.e. don't worry about top tube lengths like 20.625 or 20.85. keep it to 20, 20.5, or 21 it'll be easier to replicate! one thing that is definately worth thinking about for the style of frame is center of bb to center of toptube. with todays current climate of riding style (all about whiptastic) these days that length is getting shorter so the frame doesn't impede! a good company to look at for this is mirraco. the difference between mirras blend and guettlers black pearl to give different styles of riding.
hope some of this has helped a bit!
-
Paul, you will come through on top, I can imagine the crazy frames your gonna make :2funny:
Matt, I went to college to do cg 236 and nvq 2360 at the age of 28. I found it bloodt hard to do, the practical was easy, but the theory, especially the maths was super hard.. But I managed it, and despite the difference in ages I made 3 very good friends while I was there, and to this day we are still great mates.. One bit of advice I will give you, once you back into learning make sure you dont leave a long gap before you do the 2391 inspection course. Employers love you having that.. :daumenhoch:
-
Paul, you will come through on top, I can imagine the crazy frames your gonna make :2funny:
Matt, I went to college to do cg 236 and nvq 2360 at the age of 28. I found it bloodt hard to do, the practical was easy, but the theory, especially the maths was super hard.. But I managed it, and despite the difference in ages I made 3 very good friends while I was there, and to this day we are still great mates.. One bit of advice I will give you, once you back into learning make sure you dont leave a long gap before you do the 2391 inspection course. Employers love you having that.. :daumenhoch:
2391 is the hardest thing I have ever done exam wise, I am awaiting the results any day now, practical was easy but theory and maths is rock hard.
Thing is our lecturer said the course and exam is designed for you to FAIL??? because they dont want loads of people passing it
what a swizz?
:) DINGO :)
-
thanks guys for all the kind words and advice, ive wanted to do this for years, and now i have the chance im going for it , and ratty mate your right about weird ideas :daumenhoch: you should see some of my frame desighns
-
Paul, knowing how creative you are, and what a fooking lunatic you are, I can see some truly radical stuff coming our way!!!
Dingo, I did my 2391 the same time as my 16th, bloody hard work, and only 10 out of 30 odd passed. Bloody con is right.....