RADBMX.CO.UK

Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: rarman1 on August 29, 2007, 12:50 PM

Title: cranks ?
Post by: rarman1 on August 29, 2007, 12:50 PM
what cranks came out in the mid years,

primo excell's ?
Title: Re: cranks ?
Post by: SaMAlex on August 29, 2007, 12:57 PM
what cranks came out in the mid years,

primo excell's ?

Any primo cranks.
Profiles were/are/always will be used. The Heavy SS cranks came out in the 90s.
S&M Prince Alberts
Title: Re: cranks ?
Post by: rarman1 on August 29, 2007, 01:00 PM
yeah profile have been around since ever  :LolLolLolLol:    the ss profiles are they chunkier ?
Title: Re: cranks ?
Post by: SaMAlex on August 29, 2007, 01:02 PM
The SS cranks had 22mm spindle instead of 19mm and bigger arms to match. The spindle splines and the style of the arms were the same, it was all just fatter.
Title: Re: cranks ?
Post by: Lazarou on August 29, 2007, 01:21 PM
All of the usual suspects made cranks in the 90s Haro, GT, Redline etc.

GT had their cranks (at first) made by Profile (so did GT/Powerlite)

Supercross
Solid
Technique
Kastan
Boss
Crupi
TNT
Odyssey Black Widow
Schwinn
+ loads more such as Torker, Snafu etc.
Title: Re: cranks ?
Post by: rarman1 on August 29, 2007, 03:03 PM

cool, i guess i'll be reading about them then Laz :LolLolLolLol: :)
Title: Re: cranks ?
Post by: Lazarou on August 29, 2007, 03:05 PM
 :daumenhoch:
Title: Re: cranks ?
Post by: Capt Canuck on August 29, 2007, 08:32 PM
I ave some Haro cranks made by profile.
Came on a 95 master
Title: Re: cranks ?
Post by: rory on August 29, 2007, 08:36 PM
i got some first gen wtp 22 mm cranks , exactly same as profile  ss.
does anyone know if they were made by profile. ?
Title: Re: cranks ?
Post by: darkersomeday on August 29, 2007, 11:55 PM
solid bikes cranks,
odyssey black widows (race and street)
primo powerbites and race cranks
ac racing
technique
odyssey excalibur
shimano xtrs on race bikes when the euro's "fell"
rnc could maybe sneak in there aswell!
Title: Re: cranks ?
Post by: darkersomeday on August 29, 2007, 11:56 PM
i got some first gen wtp 22 mm cranks , exactly same as profile  ss.
does anyone know if they were made by profile. ?

i wouldnt have thought it like :daumenhoch:

Title: Re: cranks ?
Post by: Capt Canuck on August 30, 2007, 08:19 AM
So would Primo Powerbites be era correct on a 95 bike?
Title: Re: cranks ?
Post by: crazy foool on August 30, 2007, 10:08 PM
profile ss arnt a 22 mm spindle, there about 22.2 being american made because my mates got some and there impossibal to get bbs for
Title: Re: cranks ?
Post by: SaMAlex on August 30, 2007, 10:14 PM
profile ss arnt a 22 mm spindle, there about 22.2 being american made because my mates got some and there impossibal to get bbs for

Ha ha, who are you, George French? :LolLolLolLol:
Im guessing that the normal profiles arent 19mm dead either.
Title: Re: cranks ?
Post by: rory on August 30, 2007, 10:16 PM
0.2 mm.
just do em up extra tight and ride them :)
Title: Re: cranks ?
Post by: MartyC on August 30, 2007, 10:50 PM
0.2 mm.
just do em up extra tight and ride them :)

Or get a couple of thin shims made for them or get some US sized bearings sent over from the U.S.  :daumenhoch:
SimplePortal 2.3.5 © 2008-2012, SimplePortal