RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: dwain dibbly on September 05, 2007, 05:47 PM

Title: A FEW CHANGES TO MY RIPPER
Post by: dwain dibbly on September 05, 2007, 05:47 PM
ive always been a big fan of tuffs :smitten:
i really do think they epitomize an old school bike.
they were always the wheel i could never afford :-[
so most of my builds have them :daumenhoch:
BUT
recently ive been swayed to the dark side and started
 to prefer spokes on a ripper ???
so i had to do it :D :D

changes ive made from its first incarnation are:

black z rims stainless spokes hi flange suzue hubs
genuine comp III's
fully mirror polished early winged GT solid power disk
and matching chain ring.
nos gold mx1000 with nos DC gold cables and nos DC tech II levers
full mirror polished early pro neck stem
nos aero viscount seat
gold seat clamp

let me know what you think
BETTER OR WORSE???????



first build!!!!!


(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/Picture459.jpg)



as it is now!!!!!

(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro001.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro002-1.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro004.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro005-1.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro007.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro008.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro009.jpg)
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: harris on September 05, 2007, 05:49 PM
very nice better..   :)
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: oldsky on September 05, 2007, 05:51 PM
Better.  I usually prefer tuffs too but that looks spot on.  :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: bmx xxx on September 05, 2007, 07:14 PM
sorry dude tuffs
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: dj_benice on September 05, 2007, 07:20 PM
spokey dokeys all the way
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: QUADROPHENIA on September 05, 2007, 07:36 PM


alot better now, just thro them cack cranks away and your sorted
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: ron burgundy on September 05, 2007, 09:11 PM


alot better now, just thro them cack cranks away and your sorted

What he said :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: DIRTBIKER250F on September 05, 2007, 09:22 PM
Prefere the old chainring to that Gt power disc dross  :-[



Paul :Great_Britain:
















































Sell me it Dwain you wont miss it  :smitten:

Love your "RIPPER"
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: snav69 on September 05, 2007, 09:29 PM
Very Nice  :smitten:
Spokes all the way for me too  ;)

(http://www.radbmx.co.uk/archive/albums/n164/snav69/DSCF0296.jpg)

 :coolsmiley:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: jase on September 05, 2007, 09:51 PM
Looks sweet with the Z rims  :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: phantom photon on September 05, 2007, 10:35 PM
Stunning bike both ways  :daumenhoch:
Going to be controversial though and vote for the Tuffs  ;)
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: Jt on September 05, 2007, 11:06 PM
i'm facinated by the comments of the cranks....

get rid for what reason? cos they are double pinch?

ignoring that point, it looks mint! needs a black kashi aero to finish it right off!
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: Olliecw on September 05, 2007, 11:11 PM
Looks chicken&rice dibbers :smitten: :smitten: :)
Ollie
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: MizuToda on September 05, 2007, 11:34 PM
 Very  Nice M8  ;)
The force is strong 8)
Tuffs for me.. :laugh:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: highrisedrifter on September 06, 2007, 02:29 AM
Tuffs for me too.
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: theRuler on September 06, 2007, 11:40 AM
nice.
rippers looks too busy with tuffs!

ditch the new school crank though
run a 1pc if can't afford some nice old school 3pc cranks

can you reach those levers?
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: bodamus on September 06, 2007, 11:56 AM
Both those Rippers are real beautys but I have to agree 1 Piece Crank set up for me too.

Still look stunning though top quality builds guys  :4_17_5::daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: Stodgy on September 06, 2007, 01:23 PM
Much better with spokes and go with a 1pc - it will look spot on then.

Nice work.

 :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: Mattdub on September 06, 2007, 02:13 PM
That looks much better with spokes  :daumenhoch: , ditto on crank comments & lose the front brake on race bikes .
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: Stodgy on September 06, 2007, 02:58 PM
I must admit, I like a front brake on a Ripper for some reason. However, if you're gonna leave a front brake on loose the plate...then it's a nice 'factory' bike.
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: theRuler on September 06, 2007, 03:01 PM
front brake required for endo action ;)
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: dwain dibbly on September 06, 2007, 03:01 PM
cheers for the comments guys.
it seems to be divided over the wheels
i think tuffs on most bikes but the sleek lines
of the ripper favour spokes.
i also know what your saying about the cranks
but im really not a fan of 1 piece.
looks like i may have to raid the savings for some
single pinch :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: dwain dibbly on September 06, 2007, 03:04 PM
can you reach those levers?

never could BITD and still cant now >:(
tech II were the worse levers ever but cant find NOS gold tech III :-[
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: bmxmatt1974 on September 06, 2007, 10:47 PM
nice mate, prefer the spokes  :daumenhoch:
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: brass monkey! on September 07, 2007, 11:54 AM
looks good dib dobs !!

are you copying me though !  :LolLolLolLol:

before

(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1010291.jpg)

after

(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/newpics030907118.jpg)
Title: Re: A FEW CHANGES TO MY RIPPER
Post by: dwain dibbly on September 07, 2007, 06:02 PM
looks good dib dobs !!

are you copying me though !  :LolLolLolLol:

before

(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1010291.jpg)

after

(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/newpics030907118.jpg)

LOL i cant belive that the last time i saw your hutch
it had graphites on :smitten:
didnt know you'd swapped to Z's :-[
great minds and all that :4_17_5: :4_17_5: :4_17_5:
SimplePortal 2.3.5 © 2008-2012, SimplePortal