RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: insideoutland on November 18, 2007, 11:11 AM
-
(http://www.radbmx.co.uk/archive/albums/cc17/INSIDEOUTLAND/c416_1.jpg)
JUST PICKED THESE UP SER2 SER3 PRO CLASS :), JUST WANTED TO KNOW IF THE SER3 CAN BE CLEANED UP TO MATCH SER2 , :-\
I.E OVEN CLANER WET&DRY :daumenhoch: ANY HELP WILL BE ;) CHEERS PHIL
-
The dark rim is a hard anodised rim, not sure if it can be stripped in the same way, maybe Login_user or Atari_Ager can help as they are both Mongoose men :daumenhoch:
-
Pm sent Mate, it can be stripped but it,will be harder then normal. :daumenhoch:
-
Caustic Soda, Thick Rubber Gloves, Mask, Eye Protection, and well ventilated area will do it ;)
-
AND AFTER THE C SODA :D WILL THEY BE GOOD FOR A GOOD BUFF WITH SOME AUTO SOL?? :shocked:
-
i did these which were hard anno pc3s, i stripped the anno using caustic which took ages to do,i just kept checking them to make sure they had'nt dissapeared then mirror polished them(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/finished7.jpg)
-
they look spot on dude :shocked: did you do the polish your self ?what best to use???
-
yes mate i used a bench polishing mop,i use three stage polishing,from cource cutting compound,then medium and finish off with fine,they take a long time to do because of all the holes and you have to be careful not to loose any of the definition of the spoke holes etc ;)
-
cheers :4_17_5: