-
Right start entering your bikes for Bike of the year 2007, we want a photo and a breakdown of the parts, but a photo will do if your lazy.
What we`ll do this year is the same as last year, get all the bikes entered, doesn`t matter what it is as there can only be one winner, and we`ll vote on them and the bike with the most votes in its make, haro for instance, will go forward to the final round, and then we can vote on the best of the finalists.
You have untill the 20th December to get your bikes entered, then we`ll start the voting, one bike per member only though, and before you start to get your wife to sign up so you can enter another bike remember that it would split the votes between the bikes and you may end up getting nothing
Good luck
Voting has started, just go here :
http://www.radbmx.co.uk/forum/index.php/topic,50922.msg523555.html#msg523555
-
Scorpion TX
Replica build of my first BMX bike, based on a build from about 1981:
(http://www.radbmx.co.uk/archive/albums/g114/martycoughlin/IMG_0643.jpg)
Parts as follows:
Restored Scorpion TX Manganese Alloy Frame & Tange TX1200 Forks
Restored Alloy WIN V-Bars (with Scorpion decal)
Repro Decals
NOS Head Badge
Repro Scorpion Padset
Restored steel hubbed coaster Skyways with freewheel conversion
Tange MXII Head Set
Suntour Headlock
SST Dirt Skirt
Suntour Stem
Rad Grips
Haro two finger brake lever
DC MX1000 Brake with white DC cable
Sugino 1 piece cro-mo crank
MKS BM10 Pedals
Sugino Spider & bolts
SR Chain ring
Fluted Alloy Seat post
DC two piece seat clamp
Elina Lightning Bolt seat
Comp 3 Tyres
-
1981 Crossrider Pro
Spec:
Crossrider Pro frame
Tange TRX forks
Win V-bars
DC MX-1000's, DC cables and DC blocks
Centralisers for the above
Sumo rims, KT large flange hubs, stainless spokes
Cheng Shin Comp III tread tyres
Hatta MX-100 headset
Sugino shaped stem
Suntour Seat Clamp
Sugino 42T chainring
Sugino spider and bolts
Sugino Cr-Mo crank
KKT AMX pedals
DC pre-bent levers
Aero Jaguar seat
OGK Hex Grips
Halfords seat post
Blue dice valve caps
Repro pads and decals
FOR FULL BUILD STORY - GO HERE http://www.radbmx.co.uk/forum/index.php'topic=31296.0 (would be too long to put on here)
(http://www.radbmx.co.uk/archive/albums/h109/veganvictim/Brighton/DSCF0794.jpg)
-
Hutch Pro Star
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/PS3.jpg)
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/ps2.jpg)
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/PS6.jpg)
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/PS10.jpg)
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/PS9.jpg)
(http://www.radbmx.co.uk/archive/albums/v213/mikamagic1/PS5.jpg)
Hutch Pro Star f&f
Hutch Pro bars
Hutch Deep H stem
Hutch 2n1 headlock
Hutch Grips
Hutch Aerospeed cranks
Hutch Aerospeed powerdisc
Hutch Pro Beartrap pedals
Hutch stamped Kashimax Aero
Hutch Doughnut clamp
Hutch straight post
Hutch Magnesium hubs
Hutch Radkaps
Araya 7X rims
Dia Compe MX1000 with Tech 3 lever, DC cable
Takagi chainring
Izumi chain
Mitsuboshi Tioga Comp IV tyres
Tange headset
Other than the tyres not being Hutch logo'd Comp IV's and repop pads it's pretty much original factory spec.
-
Jason Jensen Torker
One of a kind bike featured on the April 1981 Bicycle Moto-cross Action cover and described in more detail within the magazine in which I had an article too! This bike was so aesthetically correct and blew me away!
Years later I had parts from all my years of biking including a Torker mini frame and fork. What a great anniversary present to see if I can build this guy exactly as the bike appeared, down to the zip ties! After two years of finding the Shimano hubs and Laguna bars it was time to build.
Everybody has really enjoyed the bike and to my surprise Jason Jensen heard about it and contacted me. He was really stoked to see it alive again since he had most of his BMX items stolen out of a storage area.
Well here's the bike that Juicy Jaws and Bob Osborn made famous!!! Enjoy!!!
(http://www.jtfreestyle.com/media/picts/Bikes/1981%20Jason%20Jensen%20Torker%20JTFreestyle_.jpg)
(http://www.jtfreestyle.com/media/picts/Bikes/1981%20Jason%20Jensen%20closeups%20JTFreestyle.jpg)
(http://www.jtfreestyle.com/media/picts/Bikes/1981%20BMXA%20Jensen%20cover2_.jpg)
VEHICLE
Frame - Torker Mini
Fork- Torker Mini
Stem - Torker (modified like Jason's)
Headset - Tange MX-5
Bars - Laguna alloy V-bars
Grips - Oakley .5
Number Plate - Haro
Caliper - Shimano sidepull
Brake Pads - Mathauser brake pads (finless)
Brake lever - Team Products two-finger
Seat - Uni with integral fiberglass post
Seatpost clamp -Tange
Padset - Torker vinyl
Rims - Araya 7X
Hubs - Shimano road with track axles
Spokes - D.T. 80-60 stainless spokes with D.T. alloy nipples
Front tire - Mitsuboshi Competition II 1.75
Rear tire - Raleigh Red Dot 1.75 rear tire 16 x 1.75 tubes
Freewheel - Sun Tour 16T
Chain - Sedisport
Pedals - Sun Tour MP100
Cranks - Shimano 600 EX 170mm cranks
Bottom Bracket - O.M.A.S. sealed-bearing bottom bracket O.M.A.S. alloy crank bolts
Chainwheel - Dura-Ace 44T
Hard lacquer coated copper plating on all aluminum alloy parts.
This bike is exact with all original parts, no reproductions here!
DIALIN IN
Jeff Tollefson - The Torker Kid
www.JTFreestyle.com
-
2007 is the year I build this beauty, a 1984 GHP long.
(http://users.pandora.be/jjrbmx/1ghp.jpg)
1984 GHP Pro frame with custom made repro GHP fork. Araya 7X rims, Suzue hubs, Suntour axle nuts, Tioga Comp III tires, Redline 401 flight, Mongoose BB, Tuf Neck chainwheel, Izumi chain, Suntour XCII pedals, shimano freewheel, Tange headset, Pro Neck stem, GT handlebar, Dia Compe MX 1000 brake, Dia Compe Tech 3 lever, Dia Compe hinged seatpost clamp, MX seat, A'me tri grips, some seatpost with GHP decal, GHP pad set, Haro Circuit Board number plate.
-
hey all,
this would be my first ever and only build this year.
this was just a summer project for a bit of fun, i'm well chuffed with the result and love riding it.
as you all probably am aware its a skyway street beat but a little more wacky than most i've seen !
i understand its probably not a purists bike but hey, as i said its my first build.
enjoy...........
(http://img229.imageshack.us/img229/3231/mainpiced4.jpg)
-
SE Racing PK Ripper
Not the best pictures in the world but hey ho
(http://www.radbmx.co.uk/archive/albums/n164/snav69/1-9.jpg)
(http://www.radbmx.co.uk/archive/albums/n164/snav69/2-9.jpg)
(http://www.radbmx.co.uk/archive/albums/n164/snav69/3-11.jpg)
(http://www.radbmx.co.uk/archive/albums/n164/snav69/4-9.jpg)
Kashimax MX seat
Solid 6061 alloy seatpost
Suntour seatclamp
Renthal Handlebars
A'ME Cam Grips
Dia-Compe MX 1000 brake with Dia-Compe Tech 3 Lever
Suntour Power Stem
Black Headset
Black Tange Headset Lock
Repro Padset
Redline 401 Flight Crank Full Wrap Single Pinch
Redline Bubble Script Chainring 46 Teeth
Crupi Pro Round Pedals
Red Chain
Red Powdercoated Pro Class Rims with Black Spokes laced to Polished Alloy Shimano Hubs
Red Suntour Alloy Axle Nuts
Tioga Comp VIII Tyres
Tioga Superlight Tubes
And the last thing of all , White Dust/Valve Caps
Paul
-
Aero Reflex.
Not a very desirable bike I know, but it's my best build so far.
(http://farm2.static.flickr.com/1341/1269463136_b55ffcec47_b.jpg)
Aero Reflex Frame and Forks
Pro-Nek (i think) seat clamp
Tioga layback seat post
Viscount Seat
Custom decals by Del
Diamond Back Headset
Generic bottom bracket
Generic black chain
Shimano SX pedals
1 piece 180 cr-mo crank
Tuf-Nek chain ring
Shimano free wheel
Skyway tuff II's
Michelin Tyres (not sure what type, but they were NOS)
Haro Clear Grips
Skyway Pro Bars
Suntour Stem in black
Dia compe Tech IV levers
Dia Compe MX1000 brakes with centralisers & cables
Skyway tuff pads
-
1982 Mongoose Pro Class : Black Chrome
She is pretty much mint and, "I am lazy"...so the part list is scanned right out of BMX Action magazine.
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1435-1.jpg't=1197373950)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1437-1.jpg't=1197374272)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1436-1.jpg't=1197418685)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1438-1.jpg't=1197418768)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1452-1.jpg't=1197374308)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/100_1458-2.jpg't=1197418873)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/proclasstest6-1.jpg't=1197374344)
(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/mongoose411.jpg't=1197418917)
-
1984 DP Firebird Freestyler
(http://www.maj.com/gallery/bodderick/Bikes/dp_firebird_1_17-11-07.jpg)
(http://www.maj.com/gallery/bodderick/Bikes/firebird_2_17-11-07.jpg)
(http://www.maj.com/gallery/bodderick/Bikes/firebird_3_17-11-07.jpg)
(http://www.maj.com/gallery/bodderick/Bikes/firebird_4_17-11-07.jpg)
(http://www.maj.com/gallery/bodderick/Bikes/firebird_5_17-11-07.jpg)
Spec:
DP frame and forks
DP Freestyle Bars
NOS Pro Neck Stem
NOS Ame Round Grips
NOS Elina Lightning Bolt Seat
NOS Renthal Seat Post
NOS Dia Comp MX Seat Clamp
NOS Dia Compe MX901's with Tech 4 levers
NOS Tange 125 Headset
NOS Sugino CT 175 3 pc Cranks with Tioga Sealed Bottom Bracket
NOS 44t Sugino Chainring
NOS Victor 'DX' Pedals
NOS Z Rims with Suzue Sealed Hubs
Shimano 16t Freewheel
NOS Kenda Whitewall Tyres
Repro Firebird Padset
-
HARO GROUP1 RS1 1986
This one could almost be in a survivor class (if there's one!)
Got it as a complete, fitted NOS decals, changed rubber and pedals, that's it ! (cleaned it a bit you guess)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/ZDSC_0617.jpg)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/ZDSC_0608.jpg)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/ZDSC_0600.jpg)
Parts breakdown:
- HARO GROUP1 RS1 frame and fork
- HARO Group1 race stem
- Hatta alloy headset
- HARO race bars
- A'ME tri grips w/donuts
- chrome HARO seatpost
- VISCOUNT Dominator Group1 seat
- DIA COMPE MX seatclamp
- DIA COMPE 901 brake, DC tech 6 lever, DC cable
- UKAI chrome rims with SUZUE sealed hubs
- MICHELIN Naja skinwall tyres (should be Panaracers to be 100% factory specs)
- HARO GROUP1 cranks, HARO Uni-directionnal 44 chainring
- VICTOR VP 747 pedals
- KMC chain
- HARO Flo Panel plate
-
CUSTOM SUPER TUFF BURNER
(http://www.radbmx.co.uk/archive/albums/a382/DaveSimpson/outside.jpg)
(http://www.radbmx.co.uk/archive/albums/a382/DaveSimpson/outside02.jpg)
(http://www.radbmx.co.uk/archive/albums/a382/DaveSimpson/outside04.jpg)
MK2 SUPER TUFF F&F (STRIPPED AND SUPERCHROMED CANDY BLUE BY IMPREZIV)
NOS TIOGA BARS
PAD SET BY ESEMDESIGN
NOS DIA-COMPE MX901
SKYWAY TUFF 2’s SEALED
SKYWAY TUFF PADS
LUCKY ROLLERS DICE
PANARACER FREESTYLE TYRES (Now NOS LHR Comp III)
NOS AEROYAL SEAT
4JERI LAYBACK SEATPOST
SUGINO CHAINRING AND SPIDER
NOS IZUMI ZEBRA CHAIN
SHIMANO PD-MX15 PEDALS
SR STEM
NOS WHITE TANGE GRIPS
SUGINO STOCK 1PCE CRANK
SHIMANO 16T FREEWHEEL
SHARP BB BOOT
-
Here's My entry, a 1981 Raleigh Rampar R10 Custom
Spec;
1981 Rampar R10 Frame with "R" cut out & Rampar style headbadge
1981 Rampar 400 Fork with "R" cut drop outs
Blue Sugino GT three piece chainset
Blue Sugino stem
Tange Headset
Silver chain
Blue UKAI shineside wheels
Blue Dia Compe 901 Brake set
Blue Cougar 300 Seat with blue/silver fiber glass seatpost
Wellgo "DX" style alloy pedals
Blue Comp III Tyres
Blue Mushroom style hand grips
TAP 07 Chrome handlebars
Blue Reproduction Rampar pad set complete with "Period Font"
Falcon pro number plate
Custom alloy quick release seat clamp
(http://www.dylroberts.co.uk/bmx/ramparcomp.jpg)
(http://www.dylroberts.co.uk/bmx/ramparcomp2.jpg)
(http://www.dylroberts.co.uk/bmx/ramparcomp3.jpg)
(http://www.dylroberts.co.uk/bmx/ramparcomp4.jpg)
-
Ammaco Team Champion 1984
(http://www.radbmx.co.uk/archive/albums/aa203/wolfiehere/Bikes/DSCN1630.jpg)
(http://www.radbmx.co.uk/archive/albums/aa203/wolfiehere/Bikes/DSCN1628.jpg)
(http://www.radbmx.co.uk/archive/albums/aa203/wolfiehere/Bikes/DSCN1629.jpg)
Survivour Ammaco Team champion F&F
Black ACS Z Rims
Suse Hubs
Comp3 Style Chein shings
Silver MX 1000 Rear Caliper
DC MX3 Silver Lever
AME Tri Black Grips
CW Pro Bars
SR Stem
Black MX Hinged Seat Clamp
Tange Headset
Tange BB
Izumi Chain
Sugino Chainring
Sugino Crank
Aero Seat
Renthal Layback seat post
Ammaco Grey Pinstripe padset(although not all on in pic)
-
Heres mine ;-)
(http://www.radbmx.co.uk/archive/albums/i115/Olliereefer/looptail123.jpg)
(http://www.radbmx.co.uk/archive/albums/i115/Olliereefer/cooks1-1.jpg)
(http://www.radbmx.co.uk/archive/albums/i115/Olliereefer/hutch1.jpg)
Spec;
1983 Se racing PK RIPPER looptail (no cracks, re welds)
Se landing gear forks(unstamped)
Se power wing bars
Hutch western stem
Hutch beartrap pedals
1983 Cook bros dog bone 3 peice crank
Cook bros spider
Cook bros bb
Race inc seat post
Tuf neck seat clamp
Tuf neck chain ring
Dyna viscount seat
Tioga taskforce headset
Dia-compe mx1000's with centre ajusters
Shimano dx levers
Clarks powerglide cables
Skyway tuff pads
Acs Z rims (laced in white spokes)
Acs Z hubs
Suntour freewheel
Odi mushroom grips
Odi bb dust boot
Izumi zebra chain
All parts are NOS or only been fitted to other show bikes..
Thanks
Ollie
-
after seeing some of the builds already i dont stand a chance but hey! fook it!
rider.
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/IMG_6403.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/IMG_6400.jpg)
frame> s&m holmes 1996
fork> s&m pitchfork
bars> s&m slambars
stem> s&m redneck
headset> beartrap
cranks> profile racing
ring> profile hurricane
pedals> s&m
chain> kmc z
freewheel> shimano
seat> s&m large logo
post> primo rod
clamp> profile
brake> dia-compe ad990
lever> dia-compe tech 77 potts
rims> araya super 7x 36h
hubs> gt sealed 10mm 36h
tyres> primo amberwall dirt monsters 1.95
pads s&m
-
If there`s enough mid school entrys Joe then I might split them in to their own group once all the entries are in, but no promises
-
dont worry bill its no problem, it might be the only mid school bike entered,
thanks anyway though!
-
If there`s enough mid school entrys Joe then I might split them in to their own group once all the entries are in, but no promises
I'm in then (http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/banana.gif)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad002.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad004.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad006.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad007.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad009.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aalloyquad008.jpg)
1998 US made SE Quad
Landing Gear forks
King Heaset
Webco xxl stem
SE Roll bars
Jive grips w/donuts
Pauls "Love" lever
Pauls "motolite" brake
Tecnique cranks and BB
Crupi pedals
Rocket chainring
TNT Hubs
Odyssey T1000 rims
Comp 3's
SE embroided seat
Syncros Titanium post
TNT clamp
TNT chain tensioners
Not shown but now fitted
XTR cable
Dyno "Dynosaur" plate
SE pads
Not one thing on the bike is nos and all parts have been stripped, polished and/or annodised, rechromed ect....
DINGO
-
Hutch Trick Star in candy red
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140093.jpg)
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140081.jpg)
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140085.jpg)
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140111.jpg)
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140096.jpg)
(http://www.radbmx.co.uk/archive/albums/y52/suedehead_1/2007_07140095.jpg)
-
i hope i get time to get one together, i love that orange ripper and that second pic joe, that is art. I may be begging for a couple of days extension due to extreme circumstances but i'll try me best.
-
hmmmmmmmmmmmm ! just watching the competition - some fab bikes already ! it'll be the best to date I think ! just hope I can get my entry ready for next week !!!
-
Here's my first build during 2007, my dream...
Free agent Limo 1989
Frame/ Fork : Free Agent Limo 89 chrome (TT 21'') serial number 0289010, unrestored, without stickers per choice, and cleaned
Bars: Gt Expert chrome NOS
Crank :Redline 401, single pinch, 185 arms, chrome
Sprocket : Redline 43T chrome
Wheels : Arayas 7x chrome
Hubs : Suzue Sealed Bearing
Hubs: Sealed Bearing large flange chrome
Shimano SFMX 30 16T freewheel
Stem :Dk xl polished
Brake: Dia compe Nippon
Level : Dia compe tech 4 chrome NOS
Pedals :Crupi chrome
Layback : GT chrome
Clamp : Odyssey chrome NOS
Tires : Panaracer Knarler Knobby blue NOS
Grip : Odi Mushroom NOS (Stu Thomsen signature)
Seat : Dyno gray (rare)
Pad set : Free Agent chrome (rare)
I ride it...
(http://img103.imageshack.us/img103/4553/epsn0001gr1.jpg) (http://imageshack.us)
(http://img141.imageshack.us/img141/5800/epsn0002uo3.jpg) (http://imageshack.us)
(http://img141.imageshack.us/img141/7065/epsn0003mm3.jpg) (http://imageshack.us)
(http://img243.imageshack.us/img243/1682/epsn0004xv7.jpg) (http://imageshack.us)
-
1987 Traker Rumbler a.k.a. Cycle Pro Radix restored from raw, abused frame & mismatch fork given new life and identity as an Ammaco. First completed in summer 2006 celebrating the 10th bike in my collection, updated details in fall 2007.
From this:
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco1.jpg)
To this:
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco2.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco3.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco4.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco5.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco6.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco7.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco8.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco9.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco10.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco11.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco12.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco13.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco14.jpg)
(http://www.radbmx.co.uk/archive/albums/y70/Timo2F/Ammaco%20Freestyler/BikeoftheyearTraker-Ammaco15.jpg)
Parts & specs:
* Frame: 1987 Traker Rumbler/CyclePro Radix (with Ammaco decals)
* Construction: Hi-Ten (..or tri-moly with cro-mo maintubes ..who knows. Judging by the weight of the frame it is probably full Hi-Ten)
* Serial#: DS 70473327
* Forks: 1" threaded taken from a Mongoose bike with Pacific Freestyle fork stand/platform at the top
* Bars: Boss "Step Ladder" Freestyle bars
* Stem: SR/Sakae MS-422
* Grips: SM Mushroom by ODI
* Seatpost: Stylizer snake 22.2mm
* Seat: Viscount Dominator Pro w/custom lightning decals
* Seatpost clamp: DK Freestyle w/platform
* Levers: ACS Tangent (manufactured by Polygon) w/locking buttons
* Front brake/pads: Dia Compe FS880, ACS Z-Pads
* Rear brake/pads: Dia Compe MX901 w/Weinmann adjuster, ACS Z-Pads
* Rotor: ACS Pro Rotor
* Rotor cables upper/lower: Odyssey Slic
* Front brake cable: Odyssey Slic
* Headset: Tioga Beartrap-2
* Cranks: JM 1pc. 175mm Cro-Mo
* Pedals: Victor VP-555 1/2" DX-copies
* Sprocket: Power Connection power disc, w/Tioga 44T CR-1 chainwheel 44T, Tioga fixing bolts
* Bottom bracket: Tioga "Beartrap" BB-220BT 24T
* Chain: Izumi ½ x 1/8"
* Rear sprocket: 16T Dicta freewheel
* Wheels: Hutch "star" mags by OGK w/custom decorated UNI "Olympic" wheelcovers
* Front hub: Suzue "sealed mechanism"
* Front axle: 3/8" 26Tpi
* Rear hub: Suzue "sealed mechanism"
* Rear Axle: 26 Tpi
* Front pegs: "Spinner" thread-on
* Rear pegs: Odyssey Hollow Bullet 26T
* Tires: Haro 20 x 1.75
* Tubes: Kenda 20 x 1.75-2.125
* Top tube length: 18.5"
* Steering head angle: ca. 73
* Seatpost angle: ca. 73
* Wheelbase: 34 - 35"
* Chainstay length: 14"
-Timo
-
(http://www.radbmx.co.uk/archive/albums/c324/flaz/kuwa_logo1-2.gif)
1983 laserlite do I really need to do a parts run down ? ? ? nahh didnt think so,,, you all know the score otherwise you wouldnt be here would ya? ???
(http://www.radbmx.co.uk/archive/albums/c324/flaz/kuwi048.jpg)
(http://www.radbmx.co.uk/archive/albums/c324/flaz/kuwi012.jpg)
(http://www.radbmx.co.uk/archive/albums/c324/flaz/kuwi027.jpg)
(http://www.radbmx.co.uk/archive/albums/c324/flaz/kuwi043-1.jpg)
-
No surprises from me...I love this bike:
Here is my 1992 SE-made first batch Hoffman Condor in factory complete spec. It won the Mid-School Best in Show and the People's Choice at MK07, which I was humbled by...but the crowning moment was presenting it to Mat Hoffman in my hotel room in Germany at the Masters this year.
A big thanks to Mat for spending so much time with us that morning (and the following morning), I don't know who was more surprised; me for having Mat Hoffman in my hotel room, or Mat as he couldn't believe that I had spent so much time and effort in restoring the bike! He was speechless and said the bike was 'perfect, man', but he still couldn't believe what 'crap' bits they had to put on them to get them out to market!
He filled in so many gaps for me; about how he designed the stickers one afternoon on a rented Mac and everyone called him the 'Oondor', to the full production details, to why they introduced the Patriot bar so soon after the Scud bar was released.
Top top man - the only true legend of our sport.
So, here it is a full factory spec first batch 1992 Condor, complete with upgraded first gen Patriot bars. The frame is a survivor and everything else is NOS and as per the published spec (sheet below), including the VPX pedals, sprocket pocket and high pressure Chen Shing tyres. This really was a difficult build and is my ultimate Hoffman.
1992 Catalogue
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/Hoffman92cataloguePage1.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/Hoffman92Cataloguepage2.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/Hoffman92Catalogue.jpgPage4.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/condorstd.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC04986.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC04984.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC04985.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC04987.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC04992.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05301.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05297.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05265.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05277.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05272.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05280.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC05286.jpg)
-
Here is my entry.
95% NOS era correct 1978 Mongoose Roger DeCoster.
Parts
Frame - Mongoose Roger DeCoster (with Tim Cook Reproduction Decals)
Forks - Mongoose Pinched - (NOS)
Headset - Mongoose - (NOS)
Bars - Race Inc - (NOS)
Stem - Mongoose Gold Stem - (NOS)
Grips - Oury - (New)
Brake Lever - Weinmann (With Custom Bend) - (NOS)
Brake Lever Cover - Bultaco - (NOS)
Brake Caliper - Weinmann Vanquer 999 Centre Pull - (NOS)
Brake Cable - Clarks - (NOS)
Centre Pull Anchor - Dia~Compe - (NOS)
Crank Arms - Campagnolo SR (1978 Stamped) - (NOS)
Crank Dust Caps - Campagnolo Patent -(NOS)
Chainring - Campagnolo - (NOS)
Chainring Bolts - Campagnolo
Chain - Sedis/Sachs - (NOS)
Bottom Bracket - Square Taper (Open Bearing) - (NOS)
Pedals - Union Rat Trap - (NOS)
Seat Post Clamp - Mongoose Motomag
Seat Post - Alloy (Fluted) - (NOS)
Seat - Vinyl Padded - (NOS)
Hubs - Sanshin (Sanshin) Track Hubs 36h (with Campagnolo Track Axles and Track Nuts)
Freewheel - T.D. Cross & Sons - (NOS)
Rims - Spencer Alloy 36h - (NOS)
Tyres - Cheng Shin Knobbly (2.125 Front / 1.75 Rear) - (NOS)
Padset - Mongoose - (NOS)
Number Plate - Hunt Wilde Peg Board (104 was Roger DeCosters race number in 1978)- (NOS)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/newfork1.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/newfork2.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/newfork3.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/RDC10.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/RDC09.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/RDC08.jpg)
(http://www.radbmx.co.uk/archive/albums/v518/stidds/DeCoster/RDC06.jpg)
-
It's getting tough!
-
Will be trying to get this in if sombody can sell me some nice pedals please
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/cw1001.jpg)
Got a week to find some
Paul
P.S its now built up, just needing pedals. Pm me if you can help
-
1988 Haro Master Frame
1984 GT Pro Forks
GT Mallet Stem
Haro Bars
Odyssey Grips
Haro Fluted seatpost
Jaguar Seat
Odyssey Clamp
Peregrine 48s Wheels
Haro Tyres
Dia Compe callipers
Tech 77 levers
Redline Proline Cranks
Haro Chainring / Sprocket
Victor VP555 Pedals
Xposure Gyro Cover
(http://www.radbmx.co.uk/archive/albums/q290/rarman1/88master.jpg)
(http://www.radbmx.co.uk/archive/albums/q290/rarman1/88master1.jpg)
(http://www.radbmx.co.uk/archive/albums/q290/rarman1/88master2.jpg)
-
i just finished this Proline today and thought i'd throw it into the mix.
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212004.jpg)
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212013.jpg)
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212012.jpg)
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212010.jpg)
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212009.jpg)
(http://www.radbmx.co.uk/archive/albums/e86/nak302/2007_1212006.jpg)
Redline Pl-20 frame and fork custom powdered with metallic red
repo Redline sticker set
Redline Proline V-bar
AME tri grips
Dia-compe lever
Redline brute stem
Tange headset lock
Tange AW-27 headset
Tange semi fluted cro-mo seat post
generic clamp
Kashimax seat
Dia-compe centre pull rear brake with 85mm reach
Redline 401 cranks
Sugino spider
Suntour 44t chainwheel
Suntour chainring bolts
Suntour XC compe pedals
Tange BB-220 bottom bracket set
KMC chain
Weinmann rims
Suntour sealed bearing hubs
chrome spokes
Suntour 16t freewheel
Chen shin compe3 skinwall copy tyres 2.125f /1.75r
Redline padset
-
Got ot go with my 82 GT Pro
(http://www.radbmx.co.uk/archive/albums/y91/frosty_paul/GT/DSCF1478.jpg)
(http://www.radbmx.co.uk/archive/albums/y91/frosty_paul/GT/DSCF1484.jpg)
(http://www.radbmx.co.uk/archive/albums/y91/frosty_paul/GT/DSCF1480.jpg)
(http://www.radbmx.co.uk/archive/albums/y91/frosty_paul/GT/DSCF1488.jpg)
(http://www.radbmx.co.uk/archive/albums/y91/frosty_paul/GT/DSCF1486.jpg)
+f 82 GT Pro,
GT AP Bars
NOS Ame duals
used ACS stem
NOS DC Tech III lever
NOS ACS Graphite Z Rims
NOS Bullseye hubs black and pewter
DT Swiss stainless spokes and black nipples
NOS Shimano freewheel
NOS Izumi nickel chain
Sugino 400 cranks - rechromed
NOS Sugino 44t sprocket
NOS Suntour XC II's with black bodies (later issue than frame but as not an era correct build not an issue)
NOS GT seat post
NOS Elina L/bolt seat
NOS Suntour clamp
DC MX 900 with NOS ACS Z pads
NOS Mitsuboshi Grippa tyres
Plus Not very good copy pads set
-
Mid 90's Supercross SX Pro
(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/DSC00277.jpg)
(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/DSC00278.jpg)
(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/DSC00280.jpg)
(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/DSC00281.jpg)
Supercross SX125 Frame 21"tt with 1" Headset and Canti Mounts
Answer Pro Forx
Oddessy Taper Roller Pro Headset
TNT Invert Stem
Supercross Bars
A'me GT grips
Dia Compe Canti and Lever
Selle Padded Seat
Primo Rod Seatpost
Profile Seatpost Clamp
Redline weld on single pinch flights and sealed BB
Crupi HF Hubs
Sunn Chinnock Rims
Comp 8 tyres
Tried to build this to the mid 90's period. It's a rider and I can say a very good one at that.
Cheers
Andy
-
WELL I MAY A WELL HAVE A GO THEN ;););)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro009.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro008.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro001.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro003-1.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro006-1.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro004.jpg)
(http://www.radbmx.co.uk/archive/albums/a158/dwaindibbly/pro007.jpg)
1983 CANDY RED PK RIPPER
UNSTAMPED LANDING FORKS
NOS GOLD DC MX1000 BRAKES
NOS GOLD DC CABLES
NOS DC GOLD TECH II LEVERS
NOS BLACK ODI MUSHROOM GRIPS
NOS GT PRO BARS
MIRROR POLISHED PRO NECK STEM
NOS TANGE HEADSET
CUSTOM GOLD ZERONINE PLATE
REPO PADSET
NOS GOLD SUNTOUR SEATCLAMP
NOS VISCOUNT AERO SEAT
MIRROR POLISHED EARLY SANTA ANA GT
CHAINRING&POWER DISC
REDLINE FLIGHT CRANKS
HUTCH PRO BEARTRAP PEDALS
NOS FAT+THIN RAINBOW COMPIII
NOS ZRIMS+LARGE FLANGE SUZUE HUBS+GOLD NIPPLES
-
(http://www.radbmx.co.uk/archive/albums/o23/shivadread/K2.jpg)
Not seeing many Survivor condition old school bmx's, so here's mine all the way from Sunny Jersey originally from North Carolina, USA.
1985 Kuwahara Bravo (rarer Single Top tube model)
Original Kuwahara Bars
Original Kuwahara Seatpost
Original Kuwahara Stem (pro Neck)
Nos OGK Pedals
Dia Compe MX1000
Lilac Peregrine Masters
White Tyres (forgotten the make)
Lilac Saddle (forgotten the make on this as well)
Original Kuwahara 3 piece Crank
So please vote for my little baby you know it makes sense, might not be in such good condition as some of these beauties that have already been posted but wouldn't it be nice with a nice rossette on it (will I get a rossette if I win :D)
(http://www.radbmx.co.uk/archive/albums/o23/shivadread/K1.jpg)
-
1981 mongoose motomag
(http://30cms.co.uk/temp/yellow/yfm2.jpg)
the classic old school bmx
1981 frame and forks, stripped powdered and restickered
mongoose single bolt stem and bars
waffle grips
motomag II's stripped and repainted
fat skinwall knobblies
nos sugino crank
mongoose stamped snowflake chainwheel
mongoose seatpost
mongoose padded seat
mongoose stamped seatclamp
mongoose stamped headset
mongoose stamped bottom bracket
DC hinged clamp for coaster anchor
pedal cages stripped and shined
(http://30cms.co.uk/temp/yellow/y1.jpg)
(http://www.radbmx.co.uk/archive/albums/bb131/webdawgbmx/RADXMASBASH014.jpg)
-
--------------------------------------------------------------------------------
Lee Alexanders Factory Hutch Hollywood
hutch pro bars
deep H hutch stem
Hutch aerospeed crank
Hutch aerospeed disc
Hutch laidback post
Hutch mag hubs with ti axels laced to ukai rims (polished) with pink nipples
Hutch donut polished
Hutch flite pads
Hutch radcaps
misoboshi grippa tyres nos
izumi zebra chain
suntour xc ll nos
mx900 nos
kashimax aero
ame duel grips nos
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch037.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch044.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch031.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch012.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch006.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/hutch042.jpg)
the very bike,mid eighties
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/LeeAlexander.jpg)
-
Here is my 1978 Mongoose Roger De-coster.. The seat post has now been changed to a straight one !
(http://www.radbmx.co.uk/archive/albums/q133/955man/rogerdecosterseat.jpg)
(http://www.radbmx.co.uk/archive/albums/q133/955man/rogerdecosterinthedrive2.jpg)
(http://www.radbmx.co.uk/archive/albums/q133/955man/rogerdecosterheadstock.jpg)
(http://www.radbmx.co.uk/archive/albums/q133/955man/oldironneverdiesclose.jpg)
(http://www.radbmx.co.uk/archive/albums/q133/955man/Rogerdecosterinthedrive.jpg)
(http://www.radbmx.co.uk/archive/albums/q133/955man/decoster4.jpg)
-
Here's my 82/83 Prolite(rainbow model) I thought i'd go for something different :daumenhoch: It's almost the same spec as it left the shop,but with a few changes.
I good of dressed the bike up in mint 401's, Xc II's ,mx1000, Kashimax Aero etc etc. but that wouldn't be what this bike was about or anywhere near it's original spec.
I'm not a lover of Nos stuff as any one can chuck new bits together, but i have still used a few bits :daumenhoch:
SPEC........
The frame is painted in a pearl white as per the original which makes it very hard to Photograph with the flash on.
the decals i made myself and are identicle to the originals ,with some help on the artwork from YGT(thanks Mark),
i was going to use my Nos set but couldn't bring myself to do it.
the wheels are chrome cmc with 105 guage spokes,like the originals
redline v bars
dia compe 890 and 1020 brakes with pre bent levers.
takagi spider and chainwheel,
Fuan f1 type grips,
Aero Saddle,
Sr stem
Genetic 1pc crank,
bms pedals
original headset.
original seat clamp.
Hope you Like ;)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0811.jpg)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0812.jpg)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0820.jpg)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0825.jpg)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0803.jpg)
(http://www.radbmx.co.uk/archive/albums/r114/login_user/108_0813.jpg)
-
Kuwahara KZ, serial number K1J3419
Suntour Power stem, seat clamp, headlock and hubs.
Ukai rims
TIoga comp 2 tyres.
Sugino crank, spider and chain ring.
KKT LMX pedals
Dia Compe Mx 1000 brake and pre bent lever.
Elina seat
Alloy flutted post
Win v bars
OGK grips
Tange headset and BB
Izumi chain
Kuwi pads
(http://www.radbmx.co.uk/archive/albums/v260/hutch1970/100_0246rs.jpg)
(http://www.radbmx.co.uk/archive/albums/v260/hutch1970/100_0253rs.jpg)
(http://www.radbmx.co.uk/archive/albums/v260/hutch1970/100_0251rs.jpg)
(http://www.radbmx.co.uk/archive/albums/v260/hutch1970/100_0252rs.jpg)
(http://www.radbmx.co.uk/archive/albums/v260/hutch1970/100_0254s.jpg)
-
1983 CW Pistol Pete
(http://www.radbmx.co.uk/archive/albums/j269/jtsmooth/Bikes/pistolpete.jpg)
(http://www.radbmx.co.uk/archive/albums/j269/jtsmooth/Bikes/pistolpete3.jpg)
(http://www.radbmx.co.uk/archive/albums/j269/jtsmooth/Bikes/pistolpete2.jpg)
NOS Uni Turbo
NOS DC MX900 with Cable n Tech 4 Lever
NOS Ame's
NOS Izumi Zebra Chain
NOS Mitsuboshi Tioga Comp III Tyres
NOS UKAi's with Hutch Magnesium hubs
Minty Shadow Bull bars
Minty Suntour XCII Beartraps
Minty Redline 401's with Dimple Spindle
-
Mk2 Raliegh Super Burner
Original opc and chainwheel
NOS Wienmann rims/suzue hubs
Original Wienmann brakes calipers
NOS Dia-Compe tech 3 levers
NOS aero seat
NOS maxi Cross pedals
NOS Suntour seat clamp
NOS tange grips
NOS Chen Shen comp 3 tyres fat and thin combo
Repro Decals
Repro Padset
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2510.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2511.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2508.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2513.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2514.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2512.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2509.jpg)
(http://www.radbmx.co.uk/archive/albums/h290/spike371/DSCF2507.jpg)
-
Winnet, awesome mate but i've never seen a bike so badly crying out for Hutch pedals in all my life!
-
WILKERSON AIRLINES RIOT, ain't got a hope in hell, but i love this. its deffo the heaviest bike put forward,
(http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_0590.jpg)
(http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_0593.jpg)
(http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_0591.jpg)
(http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_0592.jpg)
(http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_0589.jpg)
WAL f/f
WAL bash guard
2-hip juice bars (rare as foook)
Peregrine 48's
Peregrine pedals
Peregrine stem
Peregrine seat clamp
Redline zip post
Elina l/bolt seat
DC mx101 levers
DC rear brake
ACS Boa front
Generic midschool cranks
Tuf-neck-ring n disc
Oddyssey barefeet tyres
Oddyssey slik cables
Ame tri's
Tuff Pads
-
My very own Haro Gen1 from BITD refurbed :daumenhoch:
As it was 84- 85ish :-
I love cherrypicker :D
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/CAU3S1ER.jpg)
Big air :D
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/CA5CQ91N.jpg)
I then had it sprayed red after I saw Blyther on his fst
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC00329.jpg)
This is how it eventually ended up :-
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC00611.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC00612.jpg)
As it is now :- :smitten:
I hope you like it. I do :)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01078.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01067.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01068.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01069.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01072.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01077.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01074.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01071.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/andrewhill_bpool/DSC01070.jpg)
Rundown of parts:-
Haro Gen1 F&F Rechomed
Skyway Tuff2's
Rechromed Full Wrap Redline 401 Flight Cranks with NOS Mongoose BB
Redline Chainring
KKT Rat Trap pedals
NOS Shotgun2 seat
Rechromed GT seatpost
NOS Dia Compe MX1000's
NOS Dia Compe Cables
NOS Dia Compe Tech 3 Levers
NOS Bob Haro Vector Bars
NOS Izumi chain
NOS Ame Round Grips
NOS Suntour Seatpost clamp
NOS Panaracer Freestyle tyres
-
top job haro82 thats mint
mid school needs a few more so what the hell
standard shorty frame 1995
standard 4 piece strip bars
standard 5" pegs
standard gyro hood
king 1" headset
king fork and stem combo
king front axle upgrade
peregrine super pros with standard un-braked freecoaster.
primo v monser skin walls
GT profile cranks
peregrine pedals
tnt seat clamp
graveyard disc
GT seat
(http://www.radbmx.co.uk/archive/albums/d87/harris15570/pk018.jpg)
(http://www.radbmx.co.uk/archive/albums/d87/harris15570/pk016.jpg)
(http://www.radbmx.co.uk/archive/albums/d87/harris15570/pk020.jpg)
(http://www.radbmx.co.uk/archive/albums/d87/harris15570/pk015.jpg)
-
This bike was loosely based on the Maurice Meyer Skyway in the Curb dogs photo. I came up with the idea of doing a chrome TA with white parts and his bike inspired me to go for it! Hope you like.
NOS Skyway TA frame and forks. (wish i didnt build it now!)
NOS Skyway EZ mark 1's with NOS white AMI rounds.
NOS white MX1000's with NOS tech 3's in white.
NOS Takagi chainring, spider and 1pc.
NOS Red chain
NOS Black Shimano DX's
NOS GT layback and chrome hinged DC MX seat clamp
NOS white Kashimax Aero
NOS Tioga Comp 3's (Blue and grey label)
White alloyed hubbed Tuff 2's.
NOS red Suntour power stem
(http://www.radbmx.co.uk/archive/albums/s213/munners1975/Claremun045.jpg)
-
(http://www.radbmx.co.uk/archive/albums/aa69/bikerman_04/Picture025.jpg)
1995 Standard Shorty.
Standard Shorty frame and fork
Standard 6pce strip bars
Sun rims with generic hubs
peregrine disc
tnt stm
gt seat
Standard seat post
DK seat post clamp
Shadow grips and bar ends
tech 77 levers
bulldog front brake
diatech hombre rear brake
KMC heavy duty chain
Stadard Handgernades rear/front ?(gernade copys)
nirve dx copy's
-
Don't you have to still have the bike to enter this comp ???
I think you should as if its been sold on it aint your bike anymore so you shouldn't enter it ???
Just my views fellas and not aimed at anyone at all , just my opinion ;)
Paul :coolsmiley:
me thinks i'm gonna get flamed :-\
-
Don't you have to still have the bike to enter this comp ???
I think you should as if its been sold on it aint your bike anymore so you shouldn't enter it ???
Just my views fellas and not aimed at anyone at all , just my opinion ;)
Paul :coolsmiley:
me thinks i'm gonna get flamed :-\
I agree.
-
1983 CW PHAZE 1
Complete resto project, a propa labour of love.
1983 cw phaze 1 f&f
cw bull bars
pro neck stem
ukia speedlines
comp 111s
dc 1000s
cooks bros crank
cw seat post
mx seat clamp
kashi aero
tange lp125 eadset
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/cwphaze1004.jpg)
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/outdoor011.jpg)
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/outdoor009.jpg)
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/outdoor007.jpg)
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/outdoor004.jpg)
(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/outdoor003.jpg)
Fooked camara so no clear detailed pics for now ???
Cheers Paul :Great_Britain:
Paul :Great_Britain:
-
Actually I agree , you should still own the bike, and seeing as I sold my red pk frame a few weeks ago, ive removed it form here - wish I had time o build another and enter it, but 08 is only a week or so away and im too busy!!!
-
Steve , its just my opinion mate and not intended to offend anyone :-\ . I know your not offended but you know what i mean ;)
Its upto the boss whats allowed in , not me :daumenhoch:
:coolsmiley:
-
my 84 Rickman Freestyler
Rickman frame, forks and bars.
Rickman custom padset.
Elina flyte-tech seat.
Odyssey post.
MX seat clamp.
MX 901 brakes chrome.
Tuf neck pro model stem.
Arayas chrome, black spokes with shimano hubs.
Tioga comp st tyres.
when i first got it,
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCN2035.jpg)
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCF0680.jpg)
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCF0666.jpg)
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCF0642.jpg)
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCF0677.jpg)
(http://www.radbmx.co.uk/archive/albums/aa143/bmx1973/DSCF0630.jpg)
i am very happy with the end result,
hope you like.
-
Hey Radsters, and welcome to my very first submission to a bike contest.
I have kept my entry short and lighthearted and hope you can enjoy it.
I have a full spec sheet, but have decided to keep this post short as i feel this will be more of a fun contest.
Enjoy.
Thanks
Mark
CLICK ON THE PICTURE TO DOWNLOAD THE FULL SIZED PDF FILE (2MB)
THIS WAY YOU CAN READ ALL THE TEXT ::::: http://www.byke.com/rad_bike_of_the_year_2007.pdf
(http://www.global-flat.com/photos/albums/userpics/10106/e308f8e56dac475b0bc95c937c91834a5g.jpg) (http://www.byke.com/rad_bike_of_the_year_2007.pdf)
(NO OFFENSE TO SHORT PEOPLE MEANT)
-
my VDC
(http://www.radbmx.co.uk/archive/albums/q204/jonathonsturner/DSC01292.jpg)
changa long f&f
monkey bars
tufneck
LP125
Profile gen 2 cranks with custom decals ( blue accent removed and replace with black)
Polished profile spider, anno black bolts
drilled sugino 44t.
black pro class wheels with silver mesh inserts
NOS blue label comp3
Restored Black mx1000's, NOS cables and very good used tec 3's
Nos DC hinged seat clamp
Black Kashi
New Black caged Crupi pro
(http://www.radbmx.co.uk/archive/albums/q204/jonathonsturner/DSC01299.jpg)
-
jt sweet bike mate but lose those dropout savers
ruins it for me .some nice round washers would look better
-
(http://www.radbmx.co.uk/archive/albums/o23/shivadread/K2.jpg)
Nos OGK Pedals
I think someone has nicked your pedals. ;)
-
jt sweet bike mate but lose those dropout savers
ruins it for me .some nice round washers would look better
hmmm. i like em...the flash highlights them a bit on the second pic, but they offset nicely with the alloy of the stem, seatguts, spider and hubs...
was trying to add balance/detail using colour and alternate metal finish. somthing like that anyway :LolLolLolLol:
-
... and get yourself a bigger kitchen if you plan a cruiser build ;D
Nice bike !
-
jt sweet bike mate but lose those dropout savers
ruins it for me .some nice round washers would look better
hmmm. i like em...the flash highlights them a bit on the second pic, but they offset nicely with the alloy of the stem, seatguts, spider and hubs...
was trying to add balance/detail using colour and alternate metal finish. somthing like that anyway :LolLolLolLol:
You just love those drop out savers dont ya! ;)
I think that it takes away the sleekness of the backend of the bike mate. Only my opinion but the drops are an important factor when judging the condition of the bike. (Although i know its a spanking clean one if its yours! :D) That bike dont need them. Lose em bro. :daumenhoch:
-
jt sweet bike mate but lose those dropout savers
ruins it for me .some nice round washers would look better
hmmm. i like em...the flash highlights them a bit on the second pic, but they offset nicely with the alloy of the stem, seatguts, spider and hubs...
was trying to add balance/detail using colour and alternate metal finish. somthing like that anyway :LolLolLolLol:
You just love those drop out savers dont ya! ;)
I think that it takes away the sleekness of the backend of the bike mate. Only my opinion but the drops are an important factor when judging the condition of the bike. (Although i know its a spanking clean one if its yours! :D) That bike dont need them. Lose em bro. :daumenhoch:
i disagree ... its all about add, add, add.
I dont like the savers, but they work .... and add some more stuff like a chain
-
S&M Widow maker 24"
(http://www.radbmx.co.uk/archive/albums/r313/alexleech/Bikes/widowmaker.jpg)
S&M Widow maker frame
S&M 24" pitchforks
S&M Gay bars
S&M Shafted redneck stem
S&M Seat
S&M peice of pipe seat post
S&M Gen 1 Prince Albert cranks
S&M DX pedals
Redline 40t chainring
GT Mowhawk hubs on sun rims
Longneck grips
Pitbull with odyssey pozi stop clamp
Tech 77 lever
Comp3 tyres
S&M Padset
-
very nice jt i wondered where my old changa ended up
-
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/mk07026.jpg)
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/mk07027.jpg)
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/mk07020.jpg)
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/mk07019.jpg)
MRD MINI
FRAME NOS
GRIPS AME MINI
STEM PRONECK MINI (RESTORED)
BARS POWERLITE MINI (RESTORED)
BRAKE LEVER SHIMANO DX WITH SHARP LEVER COVER
HEADSET TANGE WITH SST DIRT SKIRT
SEAT UNI MINI (RESTORED) WITH UNI COVER
PADS (HOMEMADE)
SEAT CLAMP (CUSTOM PAINTED)
BRAKE WEINMANN 500
RIMS ARAYA AERO 20X1-1/8 (RESTORED AND CUSTOM PAINTED)
TYRES 20X1 1/8
CRANKS SUNTOUR 3 PIECE (RESTORED) WITH SUGINO 41T
PEDALS SR (CUSTOM PAINTED)
BRAKE BLOCKS SKYWAY
HUBS KT ALLOY
CHAIN YUBAN
VALVE CAPS ALLOY
FLEX FIGHTER (CUSTOM PAINTED)
-
very nice jt i wondered where my old changa ended up
so that was Billy Stups old one, I think it went to Jonny via you Matt and the young James Wiseman ?
-
Yeah I think it went to Jimwise from Matt then from Jim to J.T :daumenhoch:
-
is it cursed :LolLolLolLol:
everyone has done it different as well, which is a good thing....
hope it stacks up my way!
-
is it cursed :LolLolLolLol:
everyone has done it different as well, which is a good thing....
hope it stacks up my way!
yep, to break the curse everyone who owns it has to give their car to me ! LOL !!
i'll be round to collect the Porsche in the morning then.... :D
-
very early model 1976 Mk1 grifter
(http://www.radbmx.co.uk/archive/albums/n198/AGENTORANGE2006/01COLLECTION.jpg)
(http://img.photobucket.com/albums/v355/camper007/Picture539.jpg)
(http://i60.photobucket.com/albums/h6/hotrodzombie/TL1s.jpg)
heres the spec
1976 f+f+headset+crank, f+f powdered in white sparkle
super grifter chainguard in white sparkle and burner bars in white sparkle
3 speed vector mags
dia compe mx 1000's
mngoose rogue pedals
red gumwall compe 3's
red aero seat, alloy sat post and red hope quick release seat clamp
custom made bar pad
custom red grips
mongoose GT stem
a chopper front mudguard on the rear and the front
one off custom decals
anything else in the pic :LolLolLolLol:
thanks
-
not sure 81-82 tange hotheart
(http://www.radbmx.co.uk/archive/albums/w290/earp108/DSCF2367.jpg)
(http://www.radbmx.co.uk/archive/albums/w290/earp108/DSCF1438.jpg)
(http://www.radbmx.co.uk/archive/albums/w290/earp108/DSCF2375.jpg)
yeh i'm lazy its not a full nos overhaul and also no parts breakdown
-
How strict are the judges? Lots of people are gonna lose marks for having their bars too far forward ;)
-
May as well shove this in the mix.....my Torker 280X:
(http://www.radbmx.co.uk/archive/albums/v614/retrogeezer1/PicturesfromoldHarddrive.jpg)
Thats a lovely chrome job on that gen1 Mr Haro82..
-
How strict are the judges? Lots of people are gonna lose marks for having their bars too far forward ;)
:LolLolLolLol:
Not on my DeCoster because it is built correctly.
-
My Custom Pro Burner
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2390new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2386new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2391new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2369new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2366new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2370new.jpg)
(http://www.radbmx.co.uk/archive/albums/y107/juliantaff/DSCN2367new.jpg)
Raleigh Pro Burner Frame and forks
Redline single pinch bolt 401 flight cranks
Tuffneck chainring and spider
Pro Class Chrome Rims laced to suzue chrome large flange hubs
Tange Chrome 320 headset
Elina lightning bolt seat
Suntour chrome seat clamp
Dia compe black tech 2 levers and Mx 900 polished calipers
Tioga comp 3 tyres
SR MP-131 pedals
Izumi chain
Cro-mo seat post
Suntour stem
Thanks to Burnaliser, Firebird, phantom photon , ligbee, Munners, Fhmreader, Parrishpaws and Cbrgil for Parts / help etc :)
Cheers Julian
-
That's the first Burner i've ever liked! That is lovely!
-
1994 S&M Widowmaker
Dee Snider Pro Model
Frame: 1994 S&M Widowmaker Dee Snider Rock Legend Series (less than 100 made)
Fork: 24" threaded S&M fork
Bars: S&M cruiser
Stem: 1" shafted Redneck with Wedgie Jackson I've had since 1994
Cranks: GT stamped Profile 180
Sprocket: 1st gen Redline Flight 41t
Pedals: Roost cage
Brakes: MX 901 w/Scott Mathouser pads
Lever: Tech 77
Grips: NOS clear ODI Longnecks
Seat: old leather Selle Italia Turbo
Seatpost Clamp: DK
Chain: KMC
Freewheel: Shimano 16t (silent)
Rims: Sun
Hubs: Suzue Sealed
Tires: Tioga Comp III (I have Rainbow label Comp III's coming this week)
All finish, chrome, and stickers are original.
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0828.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0830.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0836.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0834.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0842.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0841.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0838.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0832.jpg)
(http://www.radbmx.co.uk/archive/albums/v200/Gobotts/DSCN0839.jpg)
-
LMFAO
I was going to call Burner King a picture thief as i know that green door is Julians
then I see it fookin is him
LOL
Sorry Julian didnt know Burner King was you lol
Love that R gussett a lot, real nice
Rich
-
Yeh, nice one J - I thought you were not going to do anymore!!
-
nice, errr, burner...... :-[
that rocks mate :daumenhoch:
-
Thought Id put my Haro in, sorry about 2meg pics
1983 Haro Freestyler all NOS except frame and wheels, which are very very lightly used but original
1983 Haro Freestyler Frame and Forks
1st Gen campy Skyway Graphites
Single pinch redline filght cranks and chainwheel
Blue Dia Compe MX1000 brakes
Blue Haro padset
Haro flex fighter
Blue Cycle Pro shotgun II seat
Chrome Redline V Bars
Blue Redline brute stem
Blue Grab on grips
Blue/yellow Haro Levers
Yellow Dia compe brake cables
Cycle Pro snakebelly tyres
Blue Haro series 1 numer plate with vaious stickers
Blue KKT rat trap pedals
Gold Izumi chain
Blue Suntour seat clamp
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0948_edited.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0949_edited.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0950_edited.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0951_edited.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0952_edited.jpg)
-
Hi to all,
Sorry still no pictures yet, but I wanted to put it in the contest before 20/12/2007.
(pictures will follow,max friday, and I hope that it will be considered for the contest)
Cheers, fLAVIO
1985 GT Pro Performer (from Portugal)
Frame: GT Pro Performer 1985 (chrome)
Fork: GT Pro Performer 1985 (chrome)
Bars: Haro KneeSaver (chrome)
Stem: GT mallet (black)
Cranks: Redline dual pinch flight cranks 180 (chrome)
Chainwheel: Redline 44t (black)
Freewheel: Shimano DX 16T
Pedals: Shimano SX (black)
Brakes: Dia Compe FS 880 / MX901 (black)
Brakepads: Skyway Tuffpads (black)
Lever: Dia Compe Tech 5 (black and silver)
Grips: AME tri (white)
Seat: Perigrine (black)
Seatpost: GT layback (white)
Seatpost Clamp: SR (black)
Chain: KMC (white)
Wheels: Skyway Tuff II's (black)
Tyres: GT Freestyle Tyres (white)
Headset: GT Epoch
Rotor: Gyro 2 (black)
Extra: GT frame and fork standers (white)
Option: Rims -> Haro 36H (20x1,75 Black and shine side), Suzue Small Flange Sealed hub (black), Shimano DX 16T freewheel, Black nipples and chrome spokes.
-
Hey antique,
try to get the Burner king teaching you how to do clean pics,
your bikes deserves better shots ;) (at least they don't look like underwater this time :LolLolLolLol:)
I'm more of an Haro guy, but that Burner is so nice, nice bike+good pics = result !!
-
LMFAO
I was going to call Burner King a picture thief as i know that green door is Julians
then I see it fookin is him
LOL
Sorry Julian didnt know Burner King was you lol
Love that R gussett a lot, real nice
Rich
Thanks Matey, means a lot :daumenhoch:
-
1977 Mongoose Roger DeCoster
Owner JAZZCHIMP
This particular bike has been built up as a top race bike from back in the day with Schwinn box bars, Ashtabula forks, Ashtabula goose neck stem, Ashtabula 7.5” crank, Mesinger seat, early race plate and original Skyway Tuff I’s with Bendix coaster (dated ‘76) which were the lighter alternative to the famous Motomag wheel. This is the oldest UK bike featured in the Radbmx museum. Also pictured is an original Suzuki team shirt which I have aquired, as worn by the man himself back in the 70s.
Finalist in RADBMX Bike of the Year 2006, but now gunning for the top spot, so I need your vote!!! :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/v636/Jazzchimp/100_2471DeCoster1-1.jpg)
(http://www.radbmx.co.uk/archive/albums/v636/Jazzchimp/100_2473DeCoster2-1.jpg)
(http://www.radbmx.co.uk/archive/albums/v636/Jazzchimp/100_2884.jpg)
(http://www.radbmx.co.uk/archive/albums/v636/Jazzchimp/100_2883.jpg)
(http://www.radbmx.co.uk/archive/albums/v636/Jazzchimp/decoster_bermshot_500w.jpg)
Technical spec:
- Mongoose Roger DeCoster frame
- Ashtabula forks
- Ashtabula goose neck stem
- Schwinn box bars
- Mesinger cross-stiched saddle
- Skyway Tuff I’s with Bendix coaster
- Mongoose 1pc chainring
- Ashtabula 7” crank
- Rat trap pedals
-
hey chimp-man.......that was last year's entry wasn't it mate ! LOL !!
-
PK RIPPER LOOPY
Restored frame as the seat post tube had snapped
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/011.jpg)
cut out the offending tube
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/013.jpg)
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/012-1.jpg)
re inserted a besopke seat tube
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/016.jpg)
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/018.jpg)
re welded as good as new
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/pk001-1.jpg)
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/pk003.jpg)
Then re built
(http://www.radbmx.co.uk/archive/albums/v651/waxintaxin/sell413-1.jpg)
PARTS
Araya shinesides built to chrome suzue sealed hubs
Mitsuboshi silver star 3rd gen logos
redline 401 with re annodized bubble script chainring
Hutch Pro pedals
SE Wing Bars
Sqaure cornered tiger head stamp Tuf neck
Flyte pad set
MX1000 with tuf pro pads
Kashi MX with holes
SE Troxel post
Ame Grips
Enjoy
-
nice work, impressive!!! :D
-
my eye's are popping out of my head seeing these !!
when can we vote ??
-
Thought I'd add a bit more 'Mid' to the mix...
1993 Hyper Metro
(http://www.radbmx.co.uk/archive/albums/m123/nic968/Hyper/HyperMetro_11.jpg)
Frame - Hyper Metro
Forks - Hyper
Handlebars - TNT
Grips - Odyssey
Stem - VG
Cranks - Boss 180
Sprocket - Mirage/Suntour
BB - Jad
Pedals - JP Squares
Chain - KMC
Rims - Araya RB17
Hubs - Bullseye
Tyres - Comp 3
Freewheel - Shimano
Brake - Odyssey Pitbull
Lever - Odyssey Pitbull
Pads (brake) - Odyssey
Seat - Odyssey Svelte
Seat clamp - Odyssey
Seat post - Primo Rod
(http://www.radbmx.co.uk/archive/albums/m123/nic968/Hyper/HyperMetro_06.jpg)
(http://www.radbmx.co.uk/archive/albums/m123/nic968/Hyper/HyperMetro_09.jpg)
More pics in Mid School Thread..
-
Hey antique,
try to get the Burner king teaching you how to do clean pics,
your bikes deserves better shots ;) (at least they don't look like underwater this time :LolLolLolLol:)
I'm more of an Haro guy, but that Burner is so nice, nice bike+good pics = result !!
I know what a tw4t, rushed to put the chain on then didnt have time to take photos in the daylight, and a sh1t camera, oh well,, at least its in. :daumenhoch:
-
See ya for better pics then :daumenhoch:
-
How strict are the judges? Lots of people are gonna lose marks for having their bars too far forward ;)
:LolLolLolLol:
Not on my DeCoster because it is built correctly.
And my Scorpion :LolLolLolLol:
-
(http://www2.mediafire.com/imgbnc.php/837b00606955852b77108bad0635d4066g.jpg) (http://www.mediafire.com/imageview.php?quickkey=82nuodgkdyz&thumb=4)
(http://www2.mediafire.com/imgbnc.php/598853f0d20519843969dff07009ecce6g.jpg) (http://www.mediafire.com/imageview.php?quickkey=5widkt2cu5x&thumb=4)
(http://www4.mediafire.com/imgbnc.php/e3c85ce219a829a63c264ed6a19228a36g.jpg) (http://www.mediafire.com/imageview.php?quickkey=einmnjyim13&thumb=4)
My 1983 Kuwahara cruiser with Redline Forklifter cruiserbar. i actually ride this as often as i can, Got it from US on Ebay a while ago and keeps update it with some parts last month like new stickers , nos Tioga sealed BB , MX rearbrake ,Kuwahara powerdisc , Kuwahara layback , Elina seat , MX seatclamp etc. Got a Suzue fronthub that im polishing to.. Looking for MX brakelevers, nos tires , Forklifter plate , chromed Kuwahara pads etc.
Bobby Ericson Stockholm,Sweden
www.planetride.se
-
Here's the original from Freestyle BMX Magazine 1984 as tested by Andy Preston.
(http://www.radbmx.co.uk/archive/albums/ee276/cherrypicker_01/30-09-2007201338.jpg)
(http://www.radbmx.co.uk/archive/albums/ee276/cherrypicker_01/30-09-2007202621.jpg)
And here's my effort - hope you like it....
(http://www.radbmx.co.uk/archive/albums/ee276/cherrypicker_01/001.jpg)
(http://www.radbmx.co.uk/archive/albums/ee276/cherrypicker_01/003-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ee276/cherrypicker_01/002-3.jpg)
TRM Frestyler F/F
Skyway Tuff with nos coaster hub
Aero Zytec nos with rebuilt hub
Tuf Neck Powerdisc nos
Sugino 44th chainring nos
Izumi Chain nos
Sugino opc nos
Suntour XC11 Beartraps nos
Tioga Beartrap ll Headset nos
VDC Monkeybars Pro
Odi Mush's nos
DC MX Thou's, DC cables and Tech lll Levers nos
Suntour Power stem nos
Uni seat/post nos
Suntour seat clamp nos
Panaracer tubes, comp lll and Kenda whitewall all nos
-
Here's my entry………
1982 S.E. FLOVAL FLYER LOOPTAIL CRUISER
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000695.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000688.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000698.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000704.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000703.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1000706.jpg)
Parts List:
SE Floval Flyer Looptail Frame
Chrome SE Landing Gear Forks (Un-Stamped)
SE Camo Padset (Original)
24" Skyway Alloy Hubbed Tuff II Wheels
24" Tioga Comp 3 Tyres
Redline 'Full Wrap' Single Pinch Flight Cranks
Kashimax Aero Seat
Tuf Neck seatpost
Tuf Neck Polished XL Pro Stem
Tuf Neck Chrome Power Disk
Sugino 41T Chain Wheel
Skyway Graphite Pedals
Powerwing Cruiser Bars
Dia Compe Hinged Seatpost Clamp
Dia Compe MX900's
Dia Compe Tech 3 Levers
Hatta Headset
Hutch 'Rad' Kaps
A'me Tri Grips
Thanks
Matt
-
My entry
1985 Haro Freestyler Sport
The entire bike is NOS with the exception of the ACS hubs (survivor/non restored) and Chainwheel/powerdisc (survivor/non restored)
--1985 Haro Sport Frame and Fork (NOS orig, not restored)
--Haro kneesaver handlebars *NOS
--ODI mushroom grips (baby blue/white signature series "Tommy Brackens" *NOS
--Forklifter stem polished *NOS
--Tioga Bear Trap 2 headset *NOS
--Odyssey Gyro *NOS
--Baby Blue Upper Gyro cable *NOS
--Baby Blue Lower Gyro cable *NOS
--Dia Compe front brake cable (blue) *NOS
--Brakes - Dia compe 880 front and 901 rear calipers (blue) Brake Levers *NOS
-- Dia Compe Tech 6 levers (chrome) *NOS
--Odyssey Excalibur 180mm 1pc crank NOS
--Tioga sealed bottom bracket for 1pc crank BB-2205B *NOS
--Haro uni-directional chainring and powerdisc (chrome) *survivor/unrestored
--Pedals - Shimano SX pedal (blue) *NOS
--Viscount Dominator bmx seat (white) *NOS
--Blue Snakepost seatpost *NOS
--Redline seat post clamp *NOS
--ACS Z rims "Mike Buff" (white) with blue ACS hubs, white spokes,long shank spoke nipples (blue anodized) *NOS rims/spokes/nipples *Hubs are survivor/unrestored
--Tires - Panaracer freestyle (white) 20 x 1.75 *NOS
--ACS Z pads brake pads (white) *NOS
--Peregrine Axle nuts 3/8" 26TPI *NOS
--IZUMI chain (chrome) *NOS
Thanks
Danny
(http://img517.imageshack.us/img517/4492/haro16fw8.jpg)
(http://img517.imageshack.us/img517/574/haro19qn4.jpg)
(http://img517.imageshack.us/img517/8277/haro18pi9.jpg)
(http://img517.imageshack.us/img517/660/haro12qe6.jpg)
(http://img517.imageshack.us/img517/6286/haro09fx1.jpg)
(http://img517.imageshack.us/img517/5591/haro02rp5.jpg)
-
Nice garden bren
-
Nice garden bren
;D you should see the swimming pool...
-
Finally Matt, we get to see the Floval :daumenhoch: and tis very nice
Paul :Great_Britain:
-
Kappa PK20 retro
(http://www.radbmx.co.uk/archive/albums/v655/dieseldmc/Kappa2.jpg)
Parts List:
f&f - Kappa PK20
Wheels - Koxx
Cranks - Profile Racing 180mm
Pedals - Shimano DX
Bars - TNT Retro
Stem - DK
Grips - dmr
Seat - SDG Bel air
Seatpost - X lite
Seatclamp - Profile
-
Ya seen the rat version , now how about the fooking doing it version
(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/ripped2.jpg)(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/ripped1.jpg)
1982 loopy ripper (mint as fook)
unstamped landing gear (again maf)
nos nyko black headset with tange lock nut
nos black dk stem.
mint as fook se power wings
nos tech 4 levers on mint as fook mx 1000s(with center mech)
new redline flight cranks (stripped and repowdered white)
nos suginio spider , bolts and chainwheel
mint as fook shimano dx s
nos kashimax super
and last but not least nos skyway alloy hubbed tuff 2 s
oh and repro pads
-
Bren, it looks as though something has taken a sh*t on your Landing Gear forks ;D
I like it a lot, it looks as though it should be on an ASBO.....
-
i wasn't gonna enter,cos it not 100% how i'd like it,but wot the hell,let's just do it :LolLolLolLol:
original(not repo)looptail early 80's quadangle
(http://www.radbmx.co.uk/archive/albums/z105/nicfred/DSC01709.jpg)
(http://www.radbmx.co.uk/archive/albums/z105/nicfred/DSC01715.jpg)
picture below without the frame pad,i think it looks better?
(http://www.radbmx.co.uk/archive/albums/z105/nicfred/DSC01717.jpg)
(http://www.radbmx.co.uk/archive/albums/z105/nicfred/DSC01716.jpg)
heres a quick list of the bits and bobs,all parts are nos
80's looptail quadangle with unstamped landing gear
acs z rims and hubs
dia compe mx 1000 brakes,cables and levers
se wing bars(early un knurled)
odi mushroom grips
suntour stem(got a tuff neck but not got round to fitting,and its not new,so might sell it)
elina lightening bolt seat
dia compe mx seat clamp
redline single pinch full wrap crank
redline early bubble type chain ring
hutch pedals and cages
sorry the pictures are s**t,but if it does anygood ill get it off the wall and get some proper ones done,(and even put the bars at a nice angle for em,they wont go any higher on the wall cos they hit the roof) hope ya all like it ;) :daumenhoch:
-
my first and favourite build of 07 my 1983 redline pl20, parts list in museum if you wanna know whats under the hood and please don't let the red lever put you off it is now black :daumenhoch: :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/aa193/kowalski74/004-3.jpg)
(http://www.radbmx.co.uk/archive/albums/aa193/kowalski74/010.jpg)
(http://www.radbmx.co.uk/archive/albums/aa193/kowalski74/014.jpg)
(http://www.radbmx.co.uk/archive/albums/aa193/kowalski74/006-1.jpg)
(http://www.radbmx.co.uk/archive/albums/aa193/kowalski74/011.jpg)
-
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis002.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis002.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis009.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis009.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis008.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis008.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis007.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis007.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis006.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis006.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis010.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis010.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis011.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis011.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis012.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis012.jpg)
http://s58.photobucket.com/albums/g243/gashead69/?action=view¤t=GottaloveaCurtis039.jpg
(http://www.radbmx.co.uk/archive/albums/g243/gashead69/GottaloveaCurtis039.jpg)
My Lil Curtis Expert
Curtis Frame Forks & Special Bars ans Seat Post, Araya's, Dia Compe MX900's, DK Mini, Ame, Comp 3's, Sugino, KKT
:smitten: :smitten: :smitten: :smitten:
Nick
-
i'm liking the black burner :daumenhoch:
-
my custom aero pro
(http://www.radbmx.co.uk/archive/albums/g95/oldschoolburner/Picture231.jpg)
(http://www.radbmx.co.uk/archive/albums/g95/oldschoolburner/Picture212.jpg)
(http://www.radbmx.co.uk/archive/albums/g95/oldschoolburner/Picture232.jpg)
(http://www.radbmx.co.uk/archive/albums/g95/oldschoolburner/Picture226.jpg)
custom painted tange frame and forks
polished mx 1000 calipers
polished dc levers
polished suntour stem
chrome custom m pedals
raleigh branded kashimax seat
tange 125 ano silver head set
custom painted araya wheels
renthol seat post
comp 3s fat and thin
tange grips
-
nos(still has warranty card attached) '84 quadangle frame and forks,with se quad pad.
mint black alloy hubbed tuff II's,with tioga comp st freestyle tyres
nos black elina flyte tech seat,cromo straight seat post.
nos black suntour seatpost clamp.
refurbished & polished tuf neck stem.
84 GT freestyle bars,with nos black ame tris and haro tech plate.
mint black dia-compe mx1000's with tech 3 levers and d/c cables.
tioga o/p crank with white power disc and black tuf-neck chain ring.
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad1.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad2.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad3.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad4.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad5.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad6.jpg)
just waiting for my black and chrome chain to turn up .
would like to get some better pics outside but its to cold :shocked:
thanks to crazycraig,poolysherif,orgasmdonor,JTsmooth,waxintaxin,jonfoz, and dirtbiker250f......i think thats about it.
oh and wardy for being a shmuck!!
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad9.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad8.jpg)
(http://www.radbmx.co.uk/archive/albums/o140/thebigdog25/radquad7.jpg)
few outside pics now :)
-
heres my first build that im gonna use rather than be a showbike
1981 chatsworth nikel mongoose
got some mongoose bars , mx seat clamp and pad to come to finish it off
nos mongoose bb
mongoose 165 crank
mongoose snowflake
sr custom pedals
nos aero seat
nos odyssey post
nos 901s
nos suntour seat clamp
nos tyres
new skyway tuffs
nos pads
nos plate
nos izumi chain
nos hatta headset
nos shimano freewheel
nos suntour stem
nos win bars
nos ame grips
(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/mine1zzzzzzzzzzzzzzzzzz.jpg)(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/Copyofmine.jpg)(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/mygoose.jpg)
(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/SS102836aaaaa.jpg)
(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/SS102841bbbbbbb.jpg)
(http://www.radbmx.co.uk/archive/albums/cc161/eloopnai/SS102842cccccccc.jpg)
-
NOS MRD Expert
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/mrd2007boy.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/mrd2007boy1.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/MRDExpertRadbmx.jpg)
This bike Is a very close replica of by bike BITD.
NOS MRD Expert F&F.
Haro Vector Bars Rechromed With New Decals.
NOS dia Compe MX1000 & Tech III Lever With Sharp Lever Grip.
NOS Clarks Power Glide Cable.
NOS ODI Mushroom Grips.
NOS Tange LP125 Headset.
Minty Alloy Hubbed Skyways.
NOS Mitsuboshi Silver Star Grippa Tyres Both 1.175's.
Minty MKS Graphite Pedals.
Minty CW Chromo Cranks With Original Decals.
Nos Pro Neck Chain Ring.
Izumi Chrome Chain.
Tuf Neck seatpost.
Nos Dia Compe Seatpost Clamp.
Nos Cycle Pro Shotgun II Seat.
Tuf Neck Flex Fighter.
-
1987 GT Pro Freestyle Tour Team Model
(http://www.radbmx.co.uk/archive/albums/o10/NYSoulrecords/CIMG2661.jpg)
(http://www.radbmx.co.uk/archive/albums/o10/NYSoulrecords/CIMG2653.jpg)
(http://www.radbmx.co.uk/archive/albums/o10/NYSoulrecords/CIMG2647.jpg)
Frame, forks and post all powdered by Dan :daumenhoch:
Dyno Bars (NOS)
Mallet Stem (Re - Powdered)
Power Series Cranks - Mirror polished and then wet flatted with P800 to put the satin finish back
GT Pedals (NOS)
Araya 48s laced to GT Mohawk Hubs
Tioga Pool Tyres
ACS Locking levers (NOS)
White Gyro (NOS)
White Izumi (NOS)
Bleached White GT Seat
Nippon Front Brake (NOS)
AD990 Rear (NOS)
Peregrine Seat Clamp (NOS)
-
GT Nora Cup .. I never found any pedals in time, so here it is as it stands .. ( excuse the shitty pics )
(http://www.forum-fun.net/gt/1.jpg)
(http://www.forum-fun.net/gt/2.jpg)
(http://www.forum-fun.net/gt/3.jpg)
(http://www.forum-fun.net/gt/4.jpg)
GT 83 F&F Orig chrome
GT Pro Bars XL - nos
GT Seatpost - nos
GT Pads
Tuff Neck Stem - chrome
Dia Compe MX Seat clamp - nos
Dia-Compe 900's - nos
Dia-Compe Tech 4 lever - nos
Ame Grips - nos
Flite Donuts - nos
Redline 401 single pinch Crank
Redline Sprocket
Pro - Class Rims - stripped & polished
Suzue sealed hubs - nos
Comp III skinwall Tyres 1.75 rear & 2.125 front
-
83 CW Phaze 1
Photo's could have been better ::)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00538-1.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00548-1.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00536.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00539.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00532-1.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00546.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00542.jpg)
(http://www.radbmx.co.uk/archive/albums/bb318/jameshogg71/DSC00553.jpg)
Specs:
83 CW Phase 1 F/F
NOS Tange LP125 Headset
DK Pro Square Stem
CW Pro Moustache Bars
NOS Ame Dual Grips
CW Seatpost
NOS Elina Lightning Bolt Seat
NOS DK Round Seatclamp
NOS Bullseye 178mm Crank and B/B
NOS Bullseye Chainwheel
Suntour XC-11 Pedals
NOS ACS Z Rims
NOS Bullseye Hubs
GBH 186mm S/S Spokes
Prolite 16mm Red Alu Nips
NOS Shimano DX Freewheel
DC MX 1000 Brakes with Tech 3 levers
NOS ACS Z Pads
NOS Tioga Comp 3 20x1.75
NOS Yaban Chain
-
is it me or has the standard of builds
gone through the roof this year :shocked: :shocked: :shocked: :shocked: :shocked:
i think we could easily stand toe to toe with the best the yanks have to offer :Great_Britain: :Great_Britain: :Great_Britain:
FANTASTIC JOB TO EVERYONE INVOLVED :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch:
-
is it me or has the standard of builds
gone through the roof this year :shocked: :shocked: :shocked: :shocked: :shocked:
i think we could easily stand toe to toe with the best the yanks have to offer :Great_Britain: :Great_Britain: :Great_Britain:
FANTASTIC JOB TO EVERYONE INVOLVED :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch: :daumenhoch:
Hell Yeah :Great_Britain:
:daumenhoch:
-
1985 Raleigh Team Aero Pro Andy Ruffell Replica
Always been a massive fan of Andy Ruffell since i was about 8 years old and was gutted when he left Mongoose to go to Raleigh. Would not believe he had changed teams till my m8 showed me the front of the 1985 Raleigh Broucher. I took the broucher home with me and used to look through it for hours wanting to have a bike just like Ruffs. So 20 years on the dream has finally been realised and ive made the bike up as close to the broucher photo spec as i could find. Hope you dudes like, cheers
After speaking to Craig Schofield at the burner bash 2007 he told me that the Raleigh rider's bikes ran with GT Pro bars, ESP Stem and different chainwheel which i have now bought and fitted to the bike. Have also got a new Raleigh sticker on the number plate, one that is not see through. Its is now as close as possible to Andys Raleigh 85 broucher bike as i can possibly get. Thanks dudes hope you like
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/85_011-1.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0407.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0389.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0373.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0387.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0397-1.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0369.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0402.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0399.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0390.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0367.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0398.jpg)
Frame & Fork: 1985 Tange Raleigh Team Aero Pro
Bars: GT Pro Bars
Stem: ESP
Head Set: Tange 125lp Black Alloy
Cranks: Single Pinch Redline 401 Flight Cranks
Chainring: Pro Neck USA
Pedals: Hutch Bear Traps
Brakes: White MX1000 Front and Rear
Levers: White Tech 3s
Grips: Ami
Seat: Viscount Aero
Seat Post: Renthal
Seatpost Clamp: Suntour Blue
Chain: Chrome
Freewheel: Shimano 16t
Rims: Polished Pro Class
Hubs: Suzue Sealed
Tires: Tioga Comp III
Plate: Yellow Haro Flo
:coolsmiley:
-
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/vvv.jpg't=1198119729])
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/untitled33.jpg't=1198119753)
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/rrrr.jpg't=1198119773)
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/untitled.jpg't=1198119798)
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/candyjudge007-1.jpg't=1198119823)
(http://www.radbmx.co.uk/archive/albums/a125/jamielexus/HPIM3567.jpg't=1198120094)
Hutch Judge F/F Powder Over Chrome
Studd Adjustable stem
Parker Hubs
Chrome Araya Rims
Hutch Grips
Aerospeed Cranks
Phil Spider
Studd Quick Chain Chainwheel
Hutch Flite Pads
Kashimax seat
Hutch Pro Bars
Tange mx 125 Lp
Custom Back Halved Pro Racer Stand
-
would it be better with this picture Jessie ::)
(http://www.bmx-addicts.com/content/data/wallpapers/800x600_poolhanger1.jpg)
-
My 83 Mongoose Californian
Soz for pinchin the piccy, I own the bike just don't have it yet ;)
(http://www.radbmx.co.uk/archive/albums/z241/teamextremeracing/Mongoosecalifornian83.jpg)
-
:wtf:
the burner boys are rocking it this year!!
nice work fellas
-
Easy all...
WOW, there's some fantastic builds already in.The standards are hitting the rafters already. Good work to 1 & all..
Can I enter the arena now??
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/Alliant24Beforeanodisingplating.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1253.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1265.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1259.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1280.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1257.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1262.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1263.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1237.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1228.jpg)
(http://www.radbmx.co.uk/archive/albums/n169/pic1london/level1227.jpg)
2002 Alliant Pro 24 anodised bronze
Radix Copper anal intruder forks
Profile 177 copper 3pc with Ti spindle
Stolen 33 ring/13 rear sprocket
Crupi Pro pedals with Ti spindles
JP alli nuts & tensioners
Crupi sealed flip flop hubs
T H E runflat rims
Brooklands seat with copper rails
V2 clamp on stem
Hope sealed headset & bar ends
Radix copper cruiser bars
Trying to raise the fully custom bar so we can stand firm against our yanky friends..
UK representing..
Big up your hairy chests fella's.
Lets 'av it.
-
Fook me, i am now heading for the valium . What mores 2 come
-
tat man said he d give me good price on changa, new school rocks :daumenhoch:
-
love the curtis and the flip coloured burner nice rides guys
-
Just wanted to say that there are some totally mezmerising builds out there, the attention to detail is amazing :shocked:
A great diverse range of bikes, it's gonna be real difficult to pick ::)
Paul :)
-
would it be better with this picture Jessie ::)
Don't you have anything to enter instead of posting pin-ups bikes, David ?? ;) ;)
-
Bought this from a fellow rad member (thx Russ). Used to race back in the day, sold my original for £40 !!! anyway after many years away from the sport - i saw a flyer on the net advertising the new 2007 raleigh team aero burner. well i had to have one as it was one of the bikes i hadn't actually owned.
At the time i didn't realize there was even an old school scene! After taking delivery of the Burner i immediately got those what if i changed the cranks, bars etc feeling - well after a lot of ebaying and finally finding the Burner Forums and RAD i just got totally hooked.
I originally went after a white UNI turbo seat on the bay and found this one fitted to the GT, after much communication and piggy bank raiding i decided i just had to have the GT (was always my fav race bike).
Once i received the bike i decided i wanted to get some z rims fitted - couldn't afford any NOS ones - so i decided to get some old battered ones and restore them - this lead to a complete rebuild and teaching myself how to lace and true wheels!!!
Decided to completely strip and rebuild the GT, mirror polishing anything that i could. Bought some old MX1000's and reconditioned them - polished the living daylights out of anything that would sparkle - had sore fingers for weeks!
I love this bike and despite it being a carpet queen - it gets a regular thrashing - hoping to get to the track in 2008 and get back into racing.
spec list
Frame - 84 GT Pro
Forks - Tange!
Handlebars - Robinson Pro
Stem - DK Pro
Grips - Ame Tri
Levers - Dia - Compe Tech 3
Headset - Odessey Sealled
Cranks - GT Pro
Bottom Bracket - GT Sealed
Pedals - Odessey Sharkbites
Brakes - Dia-Compe MX1000's
Seat - UNI Turbo
Seatpost Clamp - Suntour
Wheels - Z Rims - Suzie Sealed Hubs
Tyres - Copy Compe 111's - now with Original GT's fitted
Pads - GT
Plate - Haro
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0008-2.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0007-2.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0006-2.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0005-2.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0004-3.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0003-3.jpg)
(http://www.radbmx.co.uk/archive/albums/z164/wildwood1971/ABCD0002-4.jpg)
-
TNT Hwa Fong Daddy
(http://www.radbmx.co.uk/archive/albums/v337/2elliot/beachfong3.jpg)
(http://www.radbmx.co.uk/archive/albums/v337/2elliot/fong1.jpg)
(http://www.radbmx.co.uk/archive/albums/v337/2elliot/fongrockin2.jpg)
American Mid School
-
tnt hwa fong daddy lush :smitten:
-
Thats two bikes Bren you mofo :LolLolLolLol:
Paul :Great_Britain:
-
Hi y'all
This is the first time I have posted so I thought I would start with a bike entry. Awesome site and some great looking bikes. Was going to enter my 83 pk ripper but there are already some good ones so I have gone for something slightly less high profile but fairly unique in this comp. My 84 Falcon Pro Omega:
Falcon Pro Omega Frame and forks (original survivor condition)
custom designed gold/black decals
original sugino stem
original dia compe mx900 brakes
The rest is NOS:
neco gold headset
win 'CW' pro bars
shimano sx gold/chrome levers
dia compe cables
tri ame grips
ukai early 80s gold rims with suntour hubs and gold ashai spokes
tioga comp III tyres
Tioga/takagi 180mm crank
tioga/takagi gold spider
tioga/takagi gold 44 chainring
KKT gold pedals
suntour gold seatpost clamp
odyssey seatpost with cw decal
Jaguar aero seat
Falcon pro padset.
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/Fal2-1.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal1.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal3.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal5.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal7.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal6.jpg)
(http://www.radbmx.co.uk/archive/albums/jj106/danlightening/fal8.jpg)
-
Thats two bikes Bren you mofo :LolLolLolLol:
Paul :Great_Britain:
Not any more mate, pulled the Ripper ;)
-
Am I too late?
Here's my rebuilt 1984 TA as seen in BMX Action Bike:
(http://mauricemeyer.net/BMX/chrome_ta/images/TA_endo.jpg)
Nearly lost...
(http://mauricemeyer.net/BMX/chrome_ta/images/P4180001-600.jpg)
(http://mauricemeyer.net/BMX/chrome_ta/images/P4180002-600.jpg)
Returned to former glory...
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190038-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190039-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190040-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190041-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190042-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190043-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190044-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190045-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190046-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190047-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190048-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190049-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190050-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190051-600.jpg)
(http://www.mauricemeyer.net/BMX/chrome_ta/images/P5190052-600.jpg)
Parts list:
- Frame - Chrome 1984 Skyway TA - Original (rechrome)
- Forks - Chrome 1984 Skyway TA - Custom no-rake for Freestyle - Original (rechrome)
- Bars - Chrome Skyway EZ Bars 1st Gen - eBay (rechrome)
- Stem - Polished Diamondback Turbo - James Ivey
- Headset - Chrome Tioga Beartrap - eBay
- Headset Lock - Chrome Hutch 1/2" - Original
- Number plate - White Haro Flo Panel - James Ivey
- Grips - Black A'me Tri - eBay
- Wheels - White Skyway Tuff Wheels - Rear coaster, front aluminum flange - Darren Chan
- Tires - Black Comp ST - Scott Service (serva)
- Valve caps - Red Annodized - Ginny's
- Seat - Black Kashimax MX - James Roth (EMPI)
- Seatpost - Black Shimano DX - Original
- Seat Clamp - Black Tuf Neck - Dan Goins (DAN)
- Cranks - Chrome Redline Flight 401 - Rob Lee
- Pedals - Black/Silver Suntour XC II - Yasser
- Power Disk - White Tuf Neck - John Pinnix (dayride)
- Sprocket - Black 43T Tuf Neck - eBay
- Chain - Red Izumi - eBay
- Brakes - Red/Black Dia-Compe MX-1000 - Original
- Levers - Black/Red Dia-Compe Tech III - Ben Rose
- Cables - Red Metallic - Ginny's
- Lever Sleeves - Red Sharp - Jason Ely (Jay47)
- Lever Covers - Black Honda XR-70 - eBay
- Brake Pads - White Skyway Pro - Original/eBay
- Brake Clamp - Red Dia-Compe MX hinged - James Roth (EMPI)
- Pads - White Skyway California Lite - Original
Notes:
- Custom factory made forks
- Went on first tour on this bike
- Entered first contest on this bike
- Got 2nd place in UK best trick reader's poll
Custom details:
- Hex bolts on cranks
- locknuts on brakes
- knee bumpers
- lever covers and sleeves
- PVC spacer for coaster
This was my first BMX restoration and I had a huge amount of fun doing it.
Full story HERE (http://mauricemeyer.net/cgi/mm.pl?datafile=../BMX/chrome_ta/page_info.txt&page=BMX/1984_Skyway_TA/index)
-
I know i have my PK in this comp but Maurice , Thats a thing of beauty :smitten: :(
Paul :coolsmiley:
-
i am quiet a novice at the building game so here's my entry my custom 'WHITE LADY' burner:
(http://[img]http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyA.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyG.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyE.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyJ.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyF.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyC.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyD.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/whiteladyB.jpg)
(http://www.radbmx.co.uk/archive/albums/bb269/russelljaques/gold1.jpg)
[/img]
the parts:
white skyway tuff II's.....uncle vulger (rb.com)
white dc brake set (front 901 rear 880)......coz
pad set....esemdesign
tyres...ginny rini's
gold neco headset....ginny rini's
gold neco BB.....ginny rini's
aeroyal seat (totally restored by me)....coz
gold kmc chain....ebay
fuen grips....ginny rini's
gold sr platform pedals....rad ash
gold sugino chainring....dave mac
gold richbrook anti theft dust caps....halfords
gold seatpost....ginny rini's
all the decals were home made by me
;)
-
would it be better with this picture Jessie ::)
Don't you have anything to enter instead of posting pin-ups bikes, David ?? ;) ;)
would you hire me a pin up for a shooting? this is the only thing i miss for my bike ;D
-
so when do we start voting??
-
I've been after a chrome Aero Pro for a quite a while but have been restricted by money and space... so after selling 2 bikes (should I have ??) it afforded me to move on with my plans. My ultimate dream bike which of course, was loosely based on one of Julian Taffs' previous builds.
RALEIGH - AERO PRO - CUSTOM
Spec:
- Raleigh Aero Pro frame & forks
- Tioga V bars
- Pro class Rims with suzue low flange hubs
- Mitsubishi comp III tyres - fat/thin
- Tange NO 300 headset
- Ame Round grips
- Suntour Power Stem
- Dia-compe Tech II levers
- Raleigh branded Kashimax Aero
- Suntour seat clamp
- cr-mo seat post
- Redline 43 T chain ring
- Redline twin-pinch flight cranks
- Shimano DX pedals
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040720.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040721.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040722.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040723.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040724.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040725.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040726.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040727.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040728.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040729.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/othomas2/More%20stuff/P1040730.jpg)
-
Entries now closed, for voting go here :
http://www.radbmx.co.uk/forum/index.php/topic,50922.msg523555.html#msg523555
-
Bah >:( missed it by a day...i was going to throw the Torker 280 in for a laugh
(http://www.radbmx.co.uk/archive/albums/w3/BMXtra/DSCF7357.jpg)
(http://www.radbmx.co.uk/archive/albums/w3/BMXtra/DSCF7355.jpg)
(http://www.radbmx.co.uk/archive/albums/w3/BMXtra/DSCF7359.jpg)
-
I have to say i really like that bike 8)
-
Managed to get the parts I needed today & took some quick snaps before leaving for xmas.... SEE ABOVE.
thanks
Owen
-
BETTER PHOTOS OF MY 1983 HARO FREESTYLER ENTRY SORRY COULD ONLY DO TODAY, BUT ITS ENTERED ANYWAY, HOPE YOU LIKE THEM!! :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0948_edited-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0949_edited-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0950_edited-1.jpg)
-
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0951_edited-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0952_edited-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ee219/paulansell/IMG_0953_edited.jpg)
GOOD LUCK AND MERRY CHRISTMAS TO ALL!! 8)
-
This will deserve more votes ! :smitten:
-
All of these bikes are amazing. It made my morning just browsing through them. Some of them brought back great memories of when I was a kid.
A special mention for Maurice's TA. It is so cool to see that bike restored. A true classic.
Merry Christmas everyone.
-
all these are amazing builds and a big fooking well done whoever wins :daumenhoch:
i just wanted to say though "THE WHITE LADY" :smitten: :smitten: :smitten: :smitten: :smitten: :smitten:
that is the maddest build i've seen for years, i'm still chuckling now ;D
big pimpin stylee?!! :coolsmiley:
best of luck and a happy christmas :daumenhoch:
-
cheers darksunday she's my bitch man :daumenhoch: ;D
-
man, ur gen 1 is fkn beautiful, got a green mas ter now but on eof the first to have a gen1 in the UK
U have done her proud!!