RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: theRuler on December 12, 2005, 09:45 AM

Title: Mongoose Cali Sticker dimensions
Post by: theRuler on December 12, 2005, 09:45 AM: I need the sticker dimensions for an 84/85 mongoose cali:

headtube sticker - height
downtube mongoose sticker - length
seattube sticker - height
fork leg sticker - height

in cms/mms please!!!!

just about to print me a set of these suckers. now my inkjet clear vinyl has finally arrived.

thanks chizzaps
Title: Re: Mongoose Cali Sticker dimensions
Post by: ORB on December 12, 2005, 09:49 AM: Print em off exactly to the sizes i sent them.

they should be exact (they were, dont think i fooked with em)
Title: Re: Mongoose Cali Sticker dimensions
Post by: theRuler on December 12, 2005, 09:57 AM: yep you're right mate
tried them in fireworks, printed huge
shifted to psp and they are fine.
i will see if i can squeeze on one sheet of A4. they should go

nice one
Title: Re: Mongoose Cali Sticker dimensions
Post by: ORB on December 12, 2005, 09:58 AM: I think i managed the lot on one bit of a4.
Title: Re: Mongoose Cali Sticker dimensions
Post by: gmac on December 12, 2005, 10:20 AM: Quote from: theRuler on December 12, 2005, 09:45 AM

just about to print me a set of these suckers. now my inkjet clear vinyl has finally arrived.

thanks chizzaps

Any chance you could print a set off for me please (pretty pleeease) ??

(http://www.radbmx.co.uk/archive/albums/d158/gmac-01/pray.gif)

Cheers

Guy :)
Title: Re: Mongoose Cali Sticker dimensions
Post by: kdw712 on December 12, 2005, 01:22 PM: If they are the ones i think they are :santa_afro: :santa_afro: ;) ;) :santa_afro: :santa_afro:

Paint shop is the answer as thats where they were created, from originals that were scanned in
and buffed up. :angel:

think there were supergoose ones too and poss grand prix - you got those orb ?
if not LMK & i will check.
Title: Re: Mongoose Cali Sticker dimensions
Post by: ORB on December 12, 2005, 01:29 PM: Yip, and pro class ;)
Title: Re: Mongoose Cali Sticker dimensions
Post by: kdw712 on December 12, 2005, 01:40 PM: :santa_afro: coolio !
Title: Re: Mongoose Cali Sticker dimensions
Post by: ORB on December 12, 2005, 01:43 PM: got the odd other scan too....

Will have to have a look.
Title: Re: Mongoose Cali Sticker dimensions
Post by: theRuler on December 12, 2005, 02:34 PM: well all the inkjet printers here at work are fooked or near-fooked
not risking a piece of a4 vinyl in one.

so i have hooked a couple of carts and i will try it in my one at home.

i dont mind running off a few sets of these, with a small donation for my costs 8)

providing they look ok that is. will update later when i have printed some.
Title: Re: Mongoose Cali Sticker dimensions
Post by: gmac on December 12, 2005, 02:42 PM: Top man. SAE with beer toshens inside on standby :santa_afro:
Title: Re: Mongoose Cali Sticker dimensions
Post by: kdw712 on December 12, 2005, 03:57 PM: i think the only prob was the colors (reds, yellows) weren't as strong
as it would be via pro equipment if you used a inkjet
sure if you went to a printers and paid their rates
te sets would be pretty good.

def a very good subs until pukka ones come forth :)

look good on my cali.